Werner range

Werner Self-Retracting Lifelines With Leading Edge Units, Horizontal and Vertical Lifeline Systems, Rope Grabs and More

Bantam, Bantam Switch, Max Patrol, Baseline and AutoCoil 2 retractables, ANSI Class 1 and Class 2 ratings, rope and cable horizontal systems, Poly-Dac vertical lines and trailing rope grabs.

Werner self-retracting lifelines give workers more freedom of movement than a fixed lanyard, extending and retracting as they move and locking when a fall begins, and the challenge is matching class, length and anchor position to the work and the fall clearance under the work. Nation Wide Ladder helps you make that match across Bantam, Bantam Switch, Max Patrol, Baseline and AutoCoil 2 self-retracting units, leading edge models, horizontal lifeline systems, vertical lifelines and rope grabs.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Werner Self-retracting Lifelines Product Lines

Where Werner Self-Retracting Lifelines and Line Systems Work

Roofers, steel erectors, precast and deck crews, utility linemen, tower climbers and facility teams rely on retractables and lifelines when the work covers distance or height that a 6 foot lanyard cannot. Horizontal systems let one or two workers move along a span, vertical lines and rope grabs follow a climb, and self-retracting units keep slack out of the line so a fall is stopped quickly.

Self-retracting lifelines earn their place where clearance is short. Werner rates overhead-anchored Bantam, Max Patrol and Baseline units to stop a fall within 24 inches, far less distance than a 6 foot lanyard and shock pack need, which matters on low roofs and mezzanines. They also appear in OSHA’s fixed ladder rules, since a fixed ladder climb of 24 feet or more must have ladder safety devices, a cage or well, or self-retracting lifelines with rest platforms no more than 150 feet apart.

Vertical travel works differently. A rope grab rides up and down the line with the climber, and Werner manual rope adjusters can be fixed anywhere along the rope for positioning or restraint, or removed and reattached as the work moves.

Over 50 years of supplying contractors means we can tell quickly whether a crew needs self-retracting units, a horizontal system or a vertical line.

Werner Fall Protection R100000 Self-Retracting Lifeline Cover

The Werner Self-Retracting and Lifeline Range by Model

The Werner Bantam is a compact web self-retracting unit at a little over 2 pounds, light enough to wear at the back, in single and twin leg form. Standard Bantam models are Class 1, and the Werner Bantam Switch connects its housing to the anchor rather than the harness D-ring, taking most of the weight off the worker’s back. Werner Max Patrol units offer more working range, from the 10 foot R410010 steel cable model to the R410020LE 20 foot Max Patrol. Baseline units are Class 1 with an aluminum housing, and AutoCoil 2 models include an 18 foot web unit and the R290006 arc flash version. Compare them in our Werner self-retracting lifelines range and our Werner leading edge SRLs, approved over steel beam, precast concrete and B-deck.

Werner temporary horizontal lifelines come as two-person systems in 30, 60 and 100 foot lengths, in kernmantle rope or cable. Werner vertical lifelines in the L201 range use 5/8 inch Poly-Dac rope up to 350 feet, paired with grabs such as the L240002 self-trailing rope grab.

Our team checks class, length and anchor position against the job, so the self-retracting units on your quote suit the work.

Werner Fall Protection R410010 Max Patrol 10ft Steel Cable Self-Retracting Lifeline

How Werner Self-Retracting Units Fit the Whole Climb

A self-retracting unit sits between an anchor overhead and a harness on the worker, and the climb to that anchor matters too. Roof crews set ladders and anchors before the first unit is clipped in, utility linemen climb a ladder against a pole with a vertical line, and steel crews reach the deck by lift or staging. Each of those routes uses equipment beyond fall protection, from extension ladders to the racks that carry them, often from several manufacturers. Planning the access and the protection together keeps clearance, anchor points and ladder lengths consistent.

For the ladders, racks and staging that get your crew to the anchor, you can survey every manufacturer we carry in our ladder and truck equipment brands hub.

Werner Fall Protection R410008LE 8FT Bantam Self-Retracting Lifeline, Leading Edge Capability

ANSI Z359.14 Classes and OSHA Rules for Werner Self-Retracting Units

Werner states that its updated Bantam and Max Patrol self-retracting lifelines are designed to ANSI Z359.14-2021. That edition replaced Classes A and B with Class 1, marked blue for overhead anchorage, and Class 2, marked yellow for leading edge use at or under the back D-ring, including foot level. Class 1 units must stop a fall within 42 inches, both classes hold average arrest force under 1,350 pounds, and test weights rose to 310 pounds. Under OSHA 1926.502, horizontal systems must be designed and used under a qualified person, and each worker on a vertical line needs a separate one.

OSHA strength rules depend on how far the device lets a worker fall. Self-retracting lifelines that hold free fall to 2 feet or less must sustain a 3,000 pound tensile load when fully extended, those that allow more must sustain 5,000 pounds, and every line has to be protected against cuts and abrasion. Werner points out that the earlier Z359.14-2014 edge test used a sharp steel edge and did not cover concrete or steel decking, which is why it tests its leading edge units over steel beam, precast concrete and B-deck. Self-retracting units built to the 2014 edition stay compliant, Werner adds, while they pass inspection and remain within service life.

At our Windham and Worcester showrooms you can compare housings, classes and hooks in person before you choose.

Werner Fall Protection L100030 30FT 2-Man Rope Horizontal Lifeline System, Cross-arm Strap, Rope Tensioner

Choosing Werner Self-Retracting Lifelines by Anchor, Length and Lift

Start with anchor position. Overhead anchorage suits a Class 1 unit, while tie-off at or under the D-ring, or at an exposed edge, calls for a Class 2 leading edge unit. Then match working length and weight, using a light Bantam for short reach and a Max Patrol for longer travel. Werner warns that horizontal systems can generate forces up to 15 times the arrest force, and it builds energy absorbers in to keep anchor loads under 2,500 pounds so they work with standard 5,000 pound anchors from our Werner fall protection anchors range. Never attach a lanyard to a self-retracting lifeline.

Bantam units come in 6, 8 and 9 foot versions, Baseline in 7 and 11 feet, Max Patrol from 10 to 65 feet and AutoCoil 2 up to 50 feet, with Werner rating Max Patrol for workers up to 400 pounds. Twin leg Bantam and Baseline models keep a worker tied off between anchors. On aerial lifts, Werner notes that boom and articulating lifts bounce while scissor lifts do not, and that Class 2 self-retracting units are often preferred in lifts.

Send us the anchor setup and reach as a list, or call 603-434-6911 or 508-754-3030, and we will quote Werner self-retracting lifelines to suit.

Werner Fall Protection R231007 AUTOCOIL 2 7FT Dual Leg Web Self-Retracting Lifeline

Inspecting and Retiring Werner Self-Retracting Lifelines and Lines

Inspect before every use and at least once a year by a competent person other than the user. Werner calls for a self-retracting unit to be repaired or retired if it has arrested a fall, its load indicator shows, its snap hook will not work, the webbing or cable is worn or kinked, or it fails to lock and release when tested. Werner does not set a fixed five-year life for its self-retracting lifelines, so condition decides. Plan clearance with Werner charts and have a rescue plan in place, which Werner treats as required. Check that the class marking on each Werner unit, blue for Class 1 or yellow for Class 2, still matches the anchor position it is being used from.

Werner offers Fall Protection Safety 101 with a recognized certificate, an online Fall Protection Core course and instructor-led training at the worksite, which helps crews run the lock and release test the same way each time.

A unit pulled from service late in the week can be replaced on a Saturday morning, when both of our locations are open.

Werner Fall Protection L201030 30FT 5/8IN (14MM) Poly-dac Vertical Lifeline

Ordering Werner Self-Retracting Lifelines From Our Team

Compare models in our rope grabs, retractables and lifelines category or return to the Werner brand overview. We quote Werner self-retracting lifelines and lifeline systems for the anchor setup you describe, and our own trucks deliver them door to door across New England.

Werner Self-retracting Lifelines FAQs

What is the difference between Class 1 and Class 2 Werner self-retracting lifelines?

Under ANSI Z359.14-2021, Class 1 is for overhead anchorage and must stop a fall within 42 inches. Class 2 is for leading edge use and is also tested at foot level.

Are older Class A and Class B self-retracting lifelines still usable?

Werner notes that units built to the 2014 standard remain compliant as long as they pass inspection and have not reached the end of their service life.

When must a Werner self-retracting unit come out of service?

When it has arrested a fall, its load indicator shows, its snap hook fails, its line is worn or kinked, or it does not lock and release properly in testing.

How many workers can share a vertical lifeline?

OSHA requires a separate vertical lifeline for each worker, with a narrow exception for elevator shaft construction.

Can I add a lanyard to Werner self-retracting lifelines for extra reach?

No. Werner says not to attach a lanyard to a self-retracting unit. Choose a longer model instead.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder