Werner Retractables & Lifelines

Werner AutoCoil SRLs, AutoCoil 2 Retractables in Steel Cable, Web, Dual Leg and Arc Flash Versions, and More

Long-reach and personal AutoCoil 2 units from 6 to 50 feet, compared on line type, housing material, ANSI class, impact indicators and the arc flash model built for electrical exposure.

Werner AutoCoil SRLs cover jobs that need either long reach or protection around an electric arc from one family, with units that extend and retract with the worker and brake automatically in a fall. Nation Wide Ladder helps crews choose among Werner steel cable SRLs in 20 and 30 feet, web units in 11, 18 and 50 feet, 7 foot dual leg models and the R290006 arc flash unit.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Werner AutoCoil SRLs Fit Utility, Industrial and Construction Work

Werner AutoCoil SRLs are the AutoCoil 2 generation of Werner SRLs, built for workers who need freedom to move around a jobsite while staying connected overhead. Werner fits every unit with a swivel top for the anchorage connection and an impact indicator in either the snap hook or the web stitching, so a unit that has taken a fall shows it. Werner AutoCoil SRLs connect at the top through the swivel and carabiner on the housing, so the unit hangs from the anchor and the line runs down to the back D-ring.

Longer Werner SRLs in the family suit crews spread across a wide area, such as a 50 foot web unit for a long roof section or a 30 foot cable unit around structural steel. Shorter dual leg models suit workers who move between anchors, and the arc flash model is aimed at electrical and utility crews whose work carries potential exposure to an electric arc. Werner says never to clip a lanyard onto one of these SRLs to gain reach, so pick the AutoCoil length that covers the work zone from the start.

The family sits alongside the newer Bantam, Max Patrol and Baseline SRLs in our Werner retractables and lifelines range, and its class marking follows the earlier edition of the ANSI standard.

Our team checks anchor position, reach and any electrical hazard with you before you order, so each Werner AutoCoil unit on the quote fits the task.

Werner Fall Protection R230018 AUTOCOIL 2 18FT Web Self-Retracting Lifeline

AutoCoil 2 Cable, Web, Dual Leg and Arc Flash Models from Werner

Cable models use steel cable in an impact resistant thermoplastic housing. The R210020 gives 20 feet of line and the R210030 cable model 30 feet.

Web models move to an aluminum housing. Werner lists the R230011 at 11 feet, the R230018 at 18 feet and the R230050 at 50 feet, the last with a 1 inch web lifeline, a snap hook and a weight of about 12.5 pounds. The R231007 is a 7 foot dual leg web assembly, and the R231007-R is a variant of the same 7 foot AutoCoil unit.

The R290006 arc flash AutoCoil is the specialist. It carries 6 feet of 3/4 inch aramid webbing in an aluminum housing and is built to meet ASTM F887 for arc flash exposure as well as ANSI Z359.14 and OSHA 1926 and 1910 fall protection rules, with its impact indicator in the web stitching. Werner also notes that its Class A rating suits low clearance work, since Class A units had to stop a fall within 24 inches.

At our Windham NH and Worcester MA showrooms you can see cable and web Werner SRLs in person and talk through which suits your site.

Werner Fall Protection R230050 AUTOCOIL 2 50FT Web Self-Retracting Lifeline

Werner AutoCoil Ratings Under the Older Class A Standard

The AutoCoil 2 listings carry ANSI Z359.14 Class A, the category from the 2014 edition of the standard, rather than the Class 1 label used on newer Werner retractables. Werner sums up the old Class A test as an overhead drop with a 282 pound weight, a stop within 24 inches and an average force under 1,350 pounds, plus a 3,000 pound static hold.

The 2021 edition replaced Classes A and B with Class 1 and Class 2, raised the test weight to 310 pounds and the static hold to 3,600 pounds, and set the Class 1 arrest limit at 42 inches. Read the label on each of these Werner SRLs and plan clearance from its own published figures.

Inspection follows the usual Werner routine, before every use and at least yearly by a competent person other than the wearer. Werner helps with recessed labels and ID tags that keep the key details with the unit, and any unit whose impact indicator shows has to come out of service. Werner does not set a fixed five-year service life for its fall protection products, so condition at inspection decides when an AutoCoil unit is retired.

Replacement Werner units travel on our own trucks door to door across New England, and we ship anywhere in the US.

Werner Fall Protection R231007 AUTOCOIL 2 7FT Dual Leg Web Self-Retracting Lifeline

Werner AutoCoil Units and the Rest of a Crew Tie-Off Kit

A retractable is one part of the system. Electrical and utility crews in particular have to match the harness, the connectors and the access equipment to the hazard, and those pieces often come from several manufacturers, from ladders to the racks that carry them.

Should you want to compare makers for that wider kit, browse our ladder and truck equipment brands hub.

Werner Fall Protection R231007-R AUTOCOIL 2 7FT Self-Retracting Lifeline

Quotes on Werner AutoCoil SRLs for Your Next Job

Steel cable and web lines from 6 to 50 feet, dual leg models and an arc flash unit give this Werner family a wide spread of uses. Tell us the anchor height, reach and any electrical exposure, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner AutoCoil SRLs or a newer Werner alternative where one suits better. Browse our Werner store or go back to the Werner brand page.

Werner AutoCoil SRLs FAQs

What lengths do Werner AutoCoil SRLs come in?

We list AutoCoil 2 steel cable units at 20 and 30 feet, web units at 11, 18 and 50 feet, a 7 foot dual leg web model and the 6 foot R290006 arc flash unit.

Which of the Werner AutoCoil SRLs is rated for arc flash?

The R290006. It uses 3/4 inch aramid webbing and is designed to meet ASTM F887 for arc flash along with ANSI Z359.14 and OSHA 1926 and 1910.

Why do AutoCoil SRLs say Class A rather than Class 1?

Class A comes from the 2014 edition of ANSI Z359.14. The 2021 edition renamed the categories Class 1 and Class 2 and raised the test weight from 282 to 310 pounds.

What housings do Werner AutoCoil SRLs use?

Impact resistant thermoplastic on the steel cable models and aluminum on the web models, each with a swivel top for the anchorage connection.

How can I tell if one of these units has stopped a fall?

Check the impact indicator in the snap hook or web stitching. If it shows, Werner says the unit must not be used until it is repaired or retired.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder