Brand spotlight

System One Ladder Racks, From Pickup and Van Rigs to Work Winches, Tool Boxes and Other Bolt-On Accessories

Contractor and Utility Rigs for pickups and vans, the I.T.S. tie-down design, aluminum and stainless construction, published capacity ratings, vehicle fitment and quote-based ordering across New England.

System One ladder racks solve a problem every working truck and van runs into, which is carrying ladders, pipe, conduit and lumber overhead while keeping the bed or cargo area free for tools. The range covers pickup Contractor Rigs and Utility Rigs, van roof racks, I.T.S. Work Winch tie-downs, Full Access tool boxes and a set of bolt-on accessories. Nation Wide Ladder quotes, supplies and installs System One setups across New England, matching the ladder rack, winches and tool boxes to your vehicle before anything is ordered.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

How System One Ladder Racks Are Built and Who Uses Them

Christensen Mfg. Corp. of New Jersey sells its racks under the System One name, and the business was started by roofing and sheet metal contractors who built their own ladder rack when nothing on the market satisfied them. System One makes modular aluminum racks for pickups, vans, service bodies and enclosed bodies, along with tool boxes and tie-downs designed to bolt into the same frame. Trades that haul ladders, pipe, conduit and lumber lean on the heavier rigs, while a homeowner carrying an extension ladder or a canoe can often manage with a lighter rig.

Two categories cover System One ladder racks. Truck Racks compares the Contractor Rig and the Utility Rig for pickups, with the Heavy Duty Contractor Rack topping the System One pickup lineup at a 1,250 lb rating from the maker. Van Roof Racks brings the same two designs to vans, all in the I.T.S. series so Work Winches can go on at purchase or years later. Choose the vehicle you are outfitting, then compare System One capacities and fit in that category.

Who Builds System One Racks and Why Contractors Designed Them

System One is the rack brand of Christensen Mfg. Corp., which lists its mailing address in Pennington, New Jersey. The story begins on job sites rather than in a showroom, because its founders were roofing and sheet metal contractors who started building their own ladder rack after failing to find a commercial rack they trusted.

Those first racks were steel and dropped into the stake pockets. When the bed rails on newer pickups began to crack under that kind of point loading, the company moved to a base that runs the full length of the bed rail. The first aluminum rack, the Utility Rig, was formed from 3/16 inch 5052 aluminum sheet, which ended the painting and rust problems of steel while keeping the rack light and stiff enough to load with a forklift.

That contractor background still shapes System One details. Each crossmember carries T-slots on both faces that accept ordinary 5/16 inch carriage bolts, so you can mount accessories with hardware from any supplier rather than hunting for proprietary fasteners. The company also reports holding 20 patents across its rack and tie-down designs.

We have served homeowners and contractors for over 50 years, so we hear the same complaints about cracked bed rails and rusting steel that pushed those founders to build a better ladder rack, and we can show you the System One design that answers them.

System One – Custom Powder Coating

The System One Range for Pickups and Vans

Pickup racks come in two families. The Contractor Rig is the full working ladder rack for trades that move long and short material in the same day, while the Utility Rig uses free-standing trusses and suits ladders and other rigid loads. Our guide to System One truck racks compares both, including the Heavy Duty Contractor Rack that System One rates at 1,250 lb.

For vans, System One builds a Contractor Rig with five crossmembers and a Utility Rig in two-truss and three-truss versions. Each van ladder rack belongs to the I.T.S. series, which means Work Winches can go on the day you buy it or years later, and the capacities and mounting details sit with our System One van roof racks.

Around the racks sits a practical set of add-ons. We list AWW Work Winches, tall side stops, crossmember J hooks, a tool box lift kit, a conduit carrier end cap kit, a strobe and antenna light mount and a cab window guard. Storage comes from the Full Access Series tool boxes, built to bolt into the same ladder rack frame.

Our team checks which System One rack, winch and tool box combination suits your vehicle and your loads, so the parts on your quote are parts designed to work together.

System One AWW – Work Winches

System One Ladder Rack Materials, Ratings and the I.T.S. Tie-Down Design

I.T.S. stands for Integrated Tie-Down System. On pickup and enclosed body racks the I.T.S. gussets, and on van racks the I.T.S. brackets, form part of the ladder rack structure while also acting as the fixed frame for a Work Winch. The winch becomes part of the rack instead of an accessory clamped on afterward, and the company keeps the winch shaft bore and pivot pin hole the same size and position on each I.T.S. bracket, so a single winch assembly fits any rack in the series.

Structural members are 6000-series extruded aluminum, and the fasteners are 18-8 stainless steel in inch sizes, many paired with nylon locking nuts. EPDM rubber Ladder Life inserts give a ladder a cushioned surface instead of bare metal, and a low-friction Ladder Glide insert on the rear crossmember helps each ladder slide on and off.

System One is frank about capacity. No industry standard governs how rack makers rate their products, so the company derives its own ratings from breaking or yield strength divided by a safety factor, and the usable limit on any day also depends on driving, roads and suspension. On a pickup, adding I.T.S. gussets moves a standard Contractor Rig from 1,000 lb to 1,250 lb.

If those ratings raise questions, bring the vehicle to our Windham, NH or Worcester, MA showroom for a free in-person consultation, and we will talk through which System One capacity suits the loads you carry.

System One – Heavy Duty Contractor Rack

Choosing System One Racks for a Truck or Van

Begin with the load. Crews hauling ladders, pipe, conduit and lumber in mixed lengths usually need a Contractor Rig, with enough crossmembers to support flexible material along its length. A homeowner carrying an extension ladder or a canoe can often work with a Utility Rig and save both weight and cost.

Next, decide how you want to secure cargo. A Heavy I.T.S. ladder rack accepts Work Winches and lets top-side and low-side tool boxes hang from the gussets on tool box hangers, which keeps the bed floor clear, while the Standard series Utility Rig breaks down quickly for storage and uses ratchet tie-downs.

Plan for growth as well. The maker describes its pickup and service body racks as expandable in steps, from a bare set of Traks to a full contractor package, at the same overall cost as buying everything up front. A van ladder rack can also move from a Utility Rig to a Contractor Rig, although the manufacturer notes that route costs a little more than starting with the contractor version.

Fit is the last check, because the racks are assembled from modular components and lengths can be cut to suit.

Once the setup is chosen, we install it ourselves, fitting the System One ladder rack, truck boxes and Work Winches to your pickup or van so it leaves our bay ready to load.

System One – Heavy Duty Utility Rack

Where a System One Ladder Rack Fits in a Complete Work Vehicle

A ladder rack is only one part of a working truck or van. The ladders it carries, the truck boxes hung from its frame and the tie-downs holding the load all have to suit the same vehicle, which is why many buyers plan the rack alongside the ladder it will carry and the storage that rides underneath. Comparing makers side by side also helps, since each brand builds its racks, boxes and ladders around a different idea of how a vehicle should be organized.

If you are weighing System One against the other rack and ladder makers on our shelves, you can line them up in our ladder and truck equipment brands hub.

System One A109 – Tall Side Stops

Buying System One With a Quote Built Around Your Vehicle

We sell System One on a quote basis, which lets us price the ladder rack and its accessories together for your exact vehicle. Tell us about the truck or van and the work through our Request a Quote form, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts. Customers in Maine are covered by our regular weekly deliveries from New Hampshire, and both locations keep Saturday morning hours.

A complete request saves a round of questions. Include the cab style as well as the bed length, because System One matches extension beam length (102, 120, 138 or 156 inches) to each body and cab pairing. Mention any tool boxes you plan to hang, whether you want Work Winches from the start and the paint code if you want color inserts matched. Custom powder coating is offered on new System One truck rack purchases, so a fleet color can be settled before the ladder rack goes on.

Our own trucks deliver System One orders door to door across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine, and we ship anywhere else in the United States.

System One A114 – Crossmember J Hook

Outfit Your Work Vehicle With System One Ladder Racks

A rack that bolts on once and then grows with the business deserves proper planning, and Nation Wide Ladder brings fitment checks, installation and New England delivery to System One ladder racks so your truck or van is set up for the loads it carries. Browse System One racks, tool boxes and accessories in our store, then send us your vehicle details for a quote.

System One Ladder Racks FAQs

What does I.T.S. mean on System One ladder racks?

It stands for Integrated Tie-Down System. The gussets or brackets that hold the rack together also form the frame for a Work Winch, so the winch is built into the rack rather than added on.

Are System One ladder racks aluminum or steel?

The racks are aluminum, with 6000-series extruded structural members and 18-8 stainless steel fasteners. System One moved from steel to aluminum early on to eliminate rust and repainting.

How much weight can a System One pickup ladder rack carry?

System One rates the Heavy I.T.S. Contractor Rig at 1,250 lb, a standard Contractor Rig at 1,000 lb and the pickup Utility Rig at 600 lb. The company notes that real capacity also depends on driving, roads and suspension.

Can I add Work Winches to a System One ladder rack later?

Yes, on any I.T.S. series rack, which includes each System One van rack. Standard series pickup racks bought after April 1, 2000 can be converted by swapping four gussets and four braces.

Do System One accessories need special bolts?

No. The T-slots in the crossmembers and Traks take standard 5/16 inch carriage bolts, so accessories mount with common hardware.

How do I get a price on System One ladder racks?

We sell System One on a quote basis. Use the Request a Quote form or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts with your vehicle details.

Need help choosing the right System One equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder