Werner Retractables & Lifelines

Werner Cable Horizontal Lifelines, Two-Person Galvanized Wire Rope Systems, Replacement Cables, End Stanchions and More

30 and 60 foot steel line systems with turnbuckle tensioning and a tension indicator, compared on anchorage ends, rebuild options, raised spans and OSHA setup duties.

Werner cable horizontal lifelines give two workers a steel running line across a beam, roof or platform, using 3/8 inch galvanized wire rope tensioned by a turnbuckle, with an inline energy absorber in the system. Nation Wide Ladder helps you choose among 30 and 60 foot kits with cross-arm straps, D-bolt anchors or no anchors, L163 replacement cable assemblies, and the L400001 end stanchion that raises the line above the workers.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Crews Choose Werner Cable Horizontal Lines Over Rope

Werner cable horizontal lifelines use 3/8 inch galvanized steel wire rope rather than synthetic kernmantle. Tension is set with a jaw and jaw turnbuckle read against a tension indicator, so the crew can see that the line has been brought up as the Werner instructions require. Werner still describes these kits as quick to set up and take down, so a crew can move a kit from one structure to the next as the work moves on steel, roofs and platforms.

Each Werner kit serves up to two users, who connect to the provided O-rings with an SRL or an energy absorbing lanyard rather than clipping onto the cable itself, which Werner lists as a connection that can roll out. An inline energy absorber is part of the system.

Crews who move a line every few days often prefer our Werner rope horizontal lifelines, which pack into a backpack, and the rest of the family sits in our Werner retractables and lifelines range.

We talk through structure, span and crew size with you, so the Werner kit on your quote matches the anchorage you actually have.

Werner Fall Protection L103030 30FT 2-Man Cable Horizontal Lifeline System, Cross-arm Strap

Werner Cable Kits, Replacement Assemblies and Stanchions by Model Number

L103 Werner kits come with cross-arm straps for wrapping a beam or column, L123 kits come with D-bolt anchors, and L153 kits are listed without an anchor type for use with anchorage chosen separately, each in 30 or 60 foot lengths such as the L123060 cable horizontal kit. Werner lists the 30 foot L103030 at about 17 pounds and the 60 foot L123060 at about 26 pounds, and the 60 foot L153060, listed without an anchor type, at about 22.5 pounds.

When a cable is worn or damaged, the L163030 replacement cable and the L163060 renew the line with its turnbuckle, fist grips and snap hook ends, rather than replacing the whole Werner kit. Werner keeps the replacement assemblies in the same 30 and 60 foot lengths as the kits, so a rebuilt line matches the original span.

For a Werner line that needs to run overhead, the L400001 end stanchion is a 7.5 foot aluminum post with a 4 inch outside diameter that comes with an A320001 D-bolt anchor attached. Werner pairs it with L400003 intermediate stanchions to split a run into several spans for low clearance work.

Kits, replacement cables and stanchions can travel together on our own trucks, which deliver door to door across New England.

Werner Fall Protection L123060 60FT 2-Man Cable Horizontal Lifeline System, D-bolt Anchor

Setup Duties and Inspection for Cable Horizontal Lifelines

OSHA requires horizontal lifelines to be designed, installed and used under the supervision of a qualified person, inside a complete fall arrest system with a safety factor of at least two. Werner lists these kits against OSHA 1910.140 and 1926.502 and points users to its instructions for installation, use and clearance requirements.

Werner tests temporary horizontal systems as complete systems and warns that their components are not interchangeable, which is why a worn cable should be renewed with the matching L163 assembly rather than wire rope from another source.

Before each use, check the wire rope for wear, kinks or damage along with the turnbuckle, fist grips, absorber, O-rings and end anchorage. Remove anything that has arrested a fall until a competent person confirms it is undamaged, as OSHA requires. Werner lists these cable kits against OSHA rules on its product pages, while the rope kits are listed against ANSI and OSHA, so check that the whole system meets the standard your site requires.

Werner publishes a cable horizontal lifeline system guide, a technical data sheet and user instructions for these kits, and a qualified person should work from them when planning anchorage, span and clearance for the horizontal line.

Replacement Werner assemblies for Maine jobs can ride our regular weekly delivery run from New Hampshire.

Werner Fall Protection L103060 60FT 2-Man Cable Horizontal Lifeline System, Cross-arm Strap

Werner Cable Horizontal Systems Within the Wider Jobsite Plan

A steel line is the middle of a bigger setup. Anchorage at each end, a harness and connector for each worker, and the ladders, staging or lifts that put the crew on the structure all have to line up, and they rarely come from one manufacturer. Werner cable horizontal lifelines also depend on a qualified person on site, and that role belongs in the same plan.

For an overview of the other makers we supply, head to our ladder and truck equipment brands hub.

Werner Fall Protection L123030 30FT 2-Man Cable Horizontal Lifeline System, D-bolt Anchor

Quotes on Werner Cable Horizontal Lifelines and Parts

Galvanized wire rope, turnbuckle tensioning with an indicator, replacement cable assemblies and raised end stanchions give two-person crews a durable running line. Tell us the span, the structure at each end and whether the line must run overhead, call 603-434-6911 or 508-754-3030, and we will quote Werner cable horizontal lifelines to suit. Browse our Werner store or return to the Werner overview.

Werner Cable Horizontal Lifelines FAQs

What cable do Werner cable horizontal lifelines use?

3/8 inch galvanized steel wire rope, tensioned with a jaw and jaw turnbuckle and a tension indicator.

Can I replace just the cable on a Werner horizontal system?

Yes. The L163030 and L163060 replacement assemblies come with the turnbuckle, fist grips and snap hook ends for the 30 and 60 foot systems.

Which Werner cable horizontal kits include anchors?

L103 kits include cross-arm straps and L123 kits include D-bolt anchors. The L153 kits are listed without an anchor type, for use with anchorage chosen separately.

How many people can use one cable horizontal line?

Up to two, each connected to an O-ring through an SRL or an energy absorbing lanyard.

How do I raise Werner cable horizontal lifelines overhead?

The L400001 7.5 foot aluminum end stanchions raise the line above the users, and L400003 intermediate stanchions split a run into shorter spans.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder