Werner range
Werner Step Ladders in Single-Sided, Twin Step and Podium Designs, Type IA to Type IAA and More
The 6200, 7300, T6200 and PD6200 series for electricians, painters and facility teams, with load ratings, safe standing height, spreader rules and inspection points.
Werner step ladders give electricians, painters, drywall crews and facility teams a self-supporting platform for interior work, and the challenge is choosing a height and rating that keeps the climber off the top step with every tool in hand. Nation Wide Ladder helps you match the 6200 single-sided series, the heavy-duty 7300, the T6200 twin step and the PD6200 podium to the job, all rated Type IA or Type IAA for daily trade use.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Werner Step Ladders Product Lines
Werner 6200 Series Fiberglass Step LaddersType IA fiberglass Werner 6200 step ladders in nine heights from 2 to 12 feet.
Werner 7300 Series Heavy-Duty Step LaddersType IAA fiberglass Werner 7300 step ladders rated 375 pounds, 3 to 12 feet, plus PD7300-4C platforms.
Werner T6200 Twin Step LaddersWerner twin step ladders in the T6200 fiberglass series, 300 pounds per side, 2 to 12 feet.
Werner 2 ft Step LaddersWerner 2 ft step ladders compared, from the 6202 and T6202 to the PD6202 podium and the PD7302-4C…
Werner 3 ft Step LaddersWerner 3 ft step ladders compared, from the 6203 and 7303 to the T6203 twin and PD6203 podium.
Werner 4 ft Step LaddersAll five Werner 4 ft step ladders compared, from the 6204 and 7304 to the T6204 twin and…
Werner 5 ft Step LaddersWerner 5 ft step ladders compared, the 6205, 7305, T6205 twin and PD6205 podium.
Werner 6 ft Step LaddersFive Werner 6 ft step ladders compared, from the 6206 and T6206 to the 7306, PD6206 podium and…
Werner 8 ft Step LaddersWerner 8 ft step ladders compared, the 6208, 7308, T6208 twin and PD6208 podium.
Werner 10 ft Step LaddersWerner 10 ft step ladders compared, the 6210, 7310, T6210 twin and PD6210 podium.
Werner 12 ft Step LaddersWerner 12 ft step ladders compared, the 6212, 7312, T6212 twin and PD6212 podium.
Who Climbs Werner Step Ladders and on Which Interior Jobs
A stepladder stands on its own, so it works in open floor space where there is nothing to lean against. That suits ceiling work, lighting and electrical fit-out, painting, drywall finishing, shelving and the routine jobs facility crews handle every week. OSHA requires a self-supporting portable ladder to hold at least four times its maximum intended load, or 3.3 times for extra-heavy-duty Type IA metal or plastic models, so the rating on Werner step ladders is backed by a real test margin.
A few rules shape how crews use them. OSHA requires a metal spreader or locking device to hold the front and rear sections open, and it bars climbing the rear cross-bracing unless the ladder has steps on both sides. Werner advises one person per ladder, with its twin step models as the exception since they are built for a climber on each side.
Sizes across the Werner step range run from 2 feet for low reach up to 12 feet for high ceilings and fixtures. Electricians and maintenance teams usually pick fiberglass for its nonconductive rails, while painters weigh the rating against how often the ladder is carried between rooms.
Over 50 years of supplying homeowners and contractors lets us size Werner step ladders for a weekend project or a full electrical crew.
Comparing the 6200, 7300, T6200 and PD6200 Werner Step Ladder Lines
The Werner 6200 is a single-sided step ladder rated Type IA at 300 pounds, a sensible default for most trade crews. Its multi-purpose top takes Werner job buckets and has steel plates for magnetic tools. When the climber, tools and material add up to more, the Werner 7300 Series fiberglass step ladder moves up to Type IAA and 375 pounds, with a heavy aluminum top, internal spreaders and sizes from 3 to 12 feet.
The Werner T6200 twin step ladder is a Type IA model with steps on both sides, which saves repositioning when the work moves around a fixture.
The Werner PD6200 is a fiberglass podium ladder rated Type IA, built for longer stints at one height. Each platform height reaches as far as a standard stepladder two feet taller, so the PD6206 works like an 8 foot ladder, and a wraparound guardrail lets the user face any direction. Crews needing more room can compare the PD7300-4C platform on casters among our Werner specialty ladders.
Our team checks the series, height and rating against your work, so the Werner step ladders on your quote suit the jobs they will see.
Where Werner Step Ladders Sit in a Crew’s Equipment
A stepladder handles the interior half of most jobs, while extension ladders, staging and vehicle racks handle the rest. Electrical and facility crews often run a fiberglass stepladder alongside a fiberglass extension ladder so rail material stays consistent around power, and painters pair a step for trim with jacks and planks for long walls. Vans and trucks need shelving or racks to carry it all, which is where other manufacturers come in. Planning the stepladder as one part of that kit keeps ratings and heights matched from the van floor to the ceiling.
If you are outfitting the vehicle as well as the crew, you can browse every manufacturer we carry in our ladder and truck equipment brands hub.
Werner Step Duty Ratings, Rail Materials and OSHA Ladder Rules
Cal/OSHA lists Type IAA at 375 pounds and Type IA at 300 pounds, the two ratings that cover Werner step ladders we supply, with Type I, II and III stepping down to 250, 225 and 200 pounds. OSHA defines the load as everything on the ladder at one time, including the worker, tools and materials, so size the rating to the heaviest realistic combination.
OSHA 1926.1053 requires nonconductive side rails wherever the worker or ladder could touch exposed energized equipment, which is why electrical crews favor fiberglass models such as the 7300 and PD6200. The same rule set bars using the top or top step of a stepladder as a step.
Steps on a portable ladder must sit 10 to 14 inches apart on center, and metal steps have to be treated to resist slipping, which is where the double-riveted slip-resistant steps on the T6200 and PD6200 come in. OSHA also requires ladders to be kept free of oil and grease, used on stable and level ground, and barricaded when set in a doorway.
At our Windham and Worcester showrooms we can set Werner step ladders side by side so you can compare ratings and tops in person.
Choosing Werner Step Height, Style and Rating for Each Climber
Werner sets the highest standing level on a stepladder at two steps under the top cap. Work out the height you need to stand at, add those two steps, and choose the size that gets you there without reaching overhead or leaning out. If you keep wanting the top step, the ladder is too short.
Pick a single-sided model when one person climbs at a time, a twin step when work happens on both sides, and a podium when the job means standing in one spot for long periods. A 300 pound Type IA model such as the 6200 or T6200 covers most single climbers with a tool belt, while the 375 pound 7300 leaves headroom for heavier workers carrying material. Fiberglass rails are the safer choice wherever wiring, panels or fixtures could be live. For ceiling grid or long runs of fixtures, a podium saves climbing down every few minutes.
Send us a list of heights and ratings, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we will quote Werner step ladders to match.
Inspecting Werner Step Spreaders, Rails and Labels Before Use
Werner’s ladder inspection form walks through the rails, steps, hardware, feet and spreaders, and the company asks for an inspection before every use. Make sure the spreaders lock fully open before climbing. Werner does not recommend repairing damaged ladders, so a cracked rail or bent spreader means the ladder comes out of service. Keep the safety labels legible, since OSHA requires them, and Werner supplies replacements through customer care.
Werner points owners to its Fiberglass Ladder Technical Manual for guidance on service life, storage and resistance to UV, weather and cold. Werner also runs ladder safety training, including its Climbing Pro Ladder Safety 101 and Ladder Core courses on setup, selection and inspection, which suit crews bringing on new hires. A short refresher on spreader locks and standing height prevents most of the misuse that shortens the life of Werner step ladders on a busy site.
When a ladder fails inspection late in the week, both of our locations open on Saturday mornings so the crew can replace it before Monday.
Ordering Werner Step Ladders for Your Crew
See current models in our step ladder category or go back to the Werner brand page for extension ladders and fall protection. We quote Werner step ladders by series, height and rating, and our own trucks deliver them door to door across New England.
Werner Step Ladders FAQs
What is the difference between the Werner 6200 and 7300 step ladders?
The Werner 6200 is rated Type IA at 300 pounds, while the Werner 7300 is rated Type IAA at 375 pounds for heavier combined loads.
How high can I stand on Werner step ladders?
Werner sets the highest standing level two steps under the top cap. OSHA prohibits standing on the top or top step of a stepladder.
When does a Werner twin step make sense?
A twin step like the Werner T6200 has steps on both sides, which helps when the work moves around a fixture or two sides of a task need reaching.
Do I need fiberglass Werner step ladders for electrical work?
OSHA requires nonconductive side rails where the worker or ladder could contact exposed energized equipment, so fiberglass ladders are the right choice for electrical work.
What is a Werner podium step ladder?
The Werner PD6200 is a fiberglass podium rated Type IA, with a guardrail around the platform. Each platform height reaches as far as a standard stepladder two feet taller.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.











