Werner Retractables & Lifelines

Werner Vertical Lifelines in 5/8 Inch Poly-Dac Rope, with Lanyard Ends, Rope Grabs, Manual Adjusters and More

Three-strand polyester and polypropylene rope from 30 to 350 feet, pre-assembled lines, self-trailing and manual grabs, plus the OSHA strength and one-worker-per-line rules.

Werner vertical lifelines solve the problem of staying tied off while climbing or working down a slope from one overhead anchor, with a rope grab riding the line to stop a fall. Nation Wide Ladder helps crews pair the right rope length with the right grab, and we supply Werner vertical lifelines in the L201 Poly-Dac range from 30 to 350 feet, lanyard-end and pre-assembled lines, and the self-trailing grabs and manual rope adjusters that run on them.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Werner Vertical Lifelines Fit on Roofs and Structures

OSHA defines a vertical lifeline as a flexible line connected to an anchorage at one end so that it hangs straight down, linking the anchor to the rest of a personal fall arrest system. The worker does not clip to the rope itself. A rope grab travels on the line and, in OSHA’s words, engages it automatically by friction and locks when a fall begins.

That arrangement suits work that moves up, down or along a slope from one fixed anchor point. Roofers working down a pitched roof from a ridge anchor and crews climbing or descending a structure stay tied off without relocating their anchor every few feet. Werner roofing kits use a rope lifeline with a rope adjuster for both travel restraint and fall arrest, so vertical lifelines can serve two purposes depending on how the adjuster is set.

Werner vertical lifelines are personal equipment in the strictest sense. OSHA requires each employee on a vertical system to have a separate line, with one narrow exception during elevator shaft construction, where two workers on a guarded false car may share a line rated at 10,000 pounds, so plan on one rope per worker. For travel along a beam or eave, our Werner horizontal lifelines give two workers a running connection across a span.

Our team counts heads and anchor points with you, so you order one Werner vertical rope for every climber on the crew.

Werner Fall Protection L201030 30FT 5/8IN (14MM) Poly-dac Vertical Lifeline

Werner Poly-Dac Vertical Lifelines in Ten Rope Lengths, Plus Pre-Assembled Lanyard and Adjuster Options

The L201 range of Werner vertical lifelines is made from 5/8 inch three-strand rope in a polyester and polypropylene blend, which Werner describes as strong yet light, comfortable in the hand and resistant to chafing. Each has a snap hook at one end for connecting to the anchorage. Lengths are 30, 35, 50, 75, 100, 125, 175, 200, 225 and 350 feet, so a crew can match the line to the height of the job instead of coiling a long surplus at the base.

Two more Werner vertical lifelines change the connection. The L242050 and L242050W are 50 foot Poly-Dac lines finished with a 3 foot lanyard and a double snap hook. For a ready-to-use setup, the L241050 rope lifeline with manual rope adjuster combines 50 feet of rope with an attached manual adjuster and an integral 3 foot shock-absorbing lanyard in 1 inch webbing, so line and grab arrive already paired.

Choosing a length is simple arithmetic. The rope has to reach from the anchorage to the lowest point the worker will travel, with enough extra that the grab stays well clear of the end. Werner cautions that its components and other makers’ parts may not be interchangeable, so pair a Poly-Dac line with a Werner grab rated for 5/8 inch rope.

We run regular weekly deliveries from New Hampshire to Maine, so long Werner vertical coils for Maine roofing crews ride a set route.

Werner Fall Protection L242050 50FT 5/8IN Poly-dac Vertical Lifeline With Lanyard

Rope Grabs and Adjusters That Ride Werner Vertical Lifelines

The grab is the working part of a vertical system, and Werner offers two kinds. Self-trailing grabs follow the worker with no input from the user. The L240002 stainless steel self-trailing rope grab moves freely up and down the rope on its own and carries an 18 inch shock pack for fall arrest, and the Werner L250000 is a steel self-trailing grab without the shock pack.

Manual grabs and adjusters are set by hand. The Werner L210100 manual rope adjuster and L240000 stainless steel grab can be attached or removed anywhere along the lifeline and fixed in place, which suits positioning and restraint as well as fall arrest, while the L210101 and L240001 add an attached 3 foot shock-absorbing lanyard for fall arrest situations.

The choice comes down to how the worker moves. A self-trailing grab suits someone who travels the line continuously, while a manual adjuster suits a roofer who wants to lock the grab at a set point and work from there. Keep the lanyard between grab and harness as short as the instructions allow, connected to the harness back D-ring. These grabs sit in our wider Werner lifeline and retractable range.

Visit our Windham NH or Worcester MA showroom for a free consultation and handle self-trailing and manual grabs before you decide.

Werner Fall Protection L201035 35FT 5/8IN (14MM) Poly-dac Vertical Lifeline

OSHA Strength Rules and Care for Werner Vertical Lifelines

OSHA 1926.502 sets the numbers. Vertical lifelines must not break at less than 5,000 pounds, the anchorage must carry 5,000 pounds per person tied to it unless a qualified person engineers it with a safety factor of two, and the line must be protected from cuts and abrasion wherever it crosses an edge or rough surface. The complete system has to hold free fall to 6 feet with no contact with a lower level, stop the worker within 3.5 feet of deceleration and limit arresting force to 1,800 pounds with a body harness, attached mid-back at shoulder height or above the head.

Werner guidance fills in the rest. Fall protection is required at heights of 6 feet on construction sites and 4 feet in general industry, and Werner treats a rescue plan as part of the system. OSHA calls for the rope, snap hook and grab to be inspected before each use, with any defective part removed from service, and Werner recommends a further annual inspection by a competent person who is not the wearer. A body harness is the only acceptable body support for fall arrest, since OSHA has prohibited body belts for that purpose since 1998.

Saturday morning hours at both of our locations make it easy to swap out a worn rope or grab before Monday.

Werner Fall Protection L201050 50FT 5/8IN (14MM) Poly-dac Vertical Lifeline, Snap Hook

Werner Vertical Rope Systems as Part of the Climbing Kit

A vertical rope is one piece of a climb. The harness, the anchor at the top and the ladder or roof access that gets the worker there all have to work with it, and many crews source those pieces from more than one maker as the job changes from roofing to structure work.

Should you want to compare suppliers for the rest of that kit, our ladder and truck equipment brands hub lists each one we carry.

Werner Fall Protection L201075 75FT 5/8IN (14MM) Poly-dac Vertical Lifeline

Quotes on Werner Vertical Lifelines and Matching Grabs

Poly-Dac rope from 30 to 350 feet, lanyard-end and pre-assembled options and a choice of self-trailing or manual grabs let each climber work from a line sized to the job. Tell us the anchor height and how your crew climbs, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner vertical lifelines with matching rope grabs. View the lines in our rope grabs, retractables and lifelines department or return to the Werner brand hub.

Werner Vertical Lifelines FAQs

Can two workers share Werner vertical lifelines?

Not on a normal job. OSHA gives every worker on a vertical system a line of their own, and only allows sharing during elevator shaft construction on a guarded false car.

What rope do Werner L201 vertical lifelines use?

5/8 inch three-strand rope in a polyester and polypropylene blend, with a snap hook at one end.

What separates a Werner self-trailing grab from a manual rope adjuster?

A self-trailing grab such as the L240002 follows the worker along the rope on its own. A manual adjuster such as the L210100 is moved by hand and can be fixed in place for positioning or restraint.

How strong must vertical lifelines be?

Under OSHA rules the line must not break at less than 5,000 pounds, and its anchorage must be rated for 5,000 pounds per connected person or be engineered by a qualified person.

What lengths do Werner vertical lifelines come in?

The Werner L201 Poly-Dac range runs 30, 35, 50, 75, 100, 125, 175, 200, 225 and 350 feet, and the L242050 and L241050 are 50 foot lines.

Which Werner vertical line comes with a grab already fitted?

The L241050, which pairs 50 feet of rope with a manual rope adjuster and an integral 3 foot shock-absorbing lanyard.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder