Buying help
Equipment for Contractors, From Ladders and Scaffolding to Truck Tool Boxes, Van Shelving, Roofing Gear and More
Twelve groups of flagship models from Werner, Louisville, Weather Guard, Holman, Alum-A-Pole, Van Mark and others, sorted by the job they do on site, on the truck and on the roof.
Choosing equipment for contractors starts with the job, and Nation Wide Ladder sorts the flagship models crews order most into twelve groups so you can find the right ladder, rack, box or harness quickly. The groups cover ladders, staging planks and scaffolding, truck tool boxes, truck ladder racks, truck bed slides and van upfitting, roofing equipment and fall protection, plus siding brakes, wall jacks and job site boxes.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Shop Equipment by Category
LaddersThe Werner and Louisville ladders contractors order most, from fiberglass extension and step ladders to multi-position, podium and…
Truck Tool BoxesThe Weather Guard and K&W truck tool boxes contractors order most, from crossover and saddle boxes to rail,…
Truck Ladder RacksThe truck ladder racks contractors order most, from drill-free aluminum rigs and sliding racks to steel, cap, service…
Truck Bed SlidesTruck bed slides from DECKED and BEDSLIDE, from CargoGlide payload options to drawer-mounted decks, guardrails, bins and tonneau…
Van UpfittingVan upfitting planned as one job, from Holman and Weather Guard shelving and partitions to van ladder racks,…
ScaffoldingFrame, interior and pump jack scaffolding compared by job, with the planks, guardrails and accessories that complete each…
Siding BrakesVan Mark and Alum-A-Pole siding brakes, from 14 inch trim brakes to the Industrial Metal Master and Ultima…
Staging PlanksAluminum stages, extendable and laminated wood planks, guardrail kits and safety nets from Werner, Louisville and Alum-A-Pole, matched…
Roofing EquipmentPlatform hoists, roof brackets, ridge hooks, chicken ladders, roofing wedges, guardrails and warning lines from RGC, Acro and…
Fall Protection EquipmentWerner harnesses, lanyards, self-retracting lifelines, rope grabs and anchors, with Bullhead and ERB head protection, chosen as one…
Job Site BoxesThe Knaack job site boxes contractors order most, from JOBMASTER chests and the Monster Box to piano boxes,…
Wall JacksProctor wall jacks in 16, 20 and 23 foot masts, with adjustable wall braces and replacement cables and…
Ladders, Staging and Scaffolding Equipment for Contractors Reaching the Work
For contractors, reaching the work safely starts with height and duty rating. Our ladders group leads with fiberglass extension and step models rated Type IA or Type IAA, since OSHA calls for nonconductive rails near exposed energized equipment, then adds multi-position, podium and leaning designs for awkward spots. When a job runs along a wall rather than up it, staging planks and ladder jacks span between two ladders to make a working platform, which is often the quickest equipment for contractors on siding and trim.
Longer jobs call for a frame. The scaffolding group covers frames, planks, guardrails and rolling interior units, plus Alum-A-Pole pump jack systems that climb aluminum poles along a wall. OSHA’s scaffold standard, 29 CFR 1926.451, requires each scaffold to support its own weight and at least four times the maximum intended load, and every system in the group is built around that rule. Choosing between staging, scaffolding and a taller ladder comes down to how long a crew works at height and how much material sits beside them, so the right access equipment depends on the job more than the budget.
Over 50 years of supplying access equipment to homeowners and contractors means we ask about the building, the crew and the schedule before we suggest a setup.
Truck and Van Equipment, From Tool Boxes and Racks to Shelving for Contractors
On a pickup, storage and ladder carrying compete for the same bed rails. Our truck tool boxes group compares crossover, saddle, rail, chest and underbody styles from Weather Guard and K&W, while truck ladder racks from System One, TracRac and Weather Guard carry ladders and pipe above the bed. Truck bed slides bring heavy equipment to the tailgate so nobody climbs into the bed after it.
Vans work differently, because everything rides inside or on the roof. The van upfitting group covers Holman shelving packages built for specific vans and trades, roof racks that carry ladders, conduit carriers for pipe, and partitions that separate the cargo area from the cab. Planning the whole vehicle at once keeps a rack, a box and a shelf from fighting for the same space, and it lets contractors run matching equipment across a fleet.
We don’t just sell, we install, so the racks, boxes and shelving we supply go on your truck or van mounted and ready for work.
Roofing and Fall Protection Equipment Contractors Use at Height
Roofers need a way up, a place to stand and a way to stop a fall. The roofing equipment group covers RGC Reimann & Georger ladder hoists that carry bundles up a track, roof brackets and ridge hooks that hold planks and ladders on a pitch, and guardrail systems for the roof edge. Each piece solves one part of the job, and contractors usually need all three before the first bundle goes up.
Personal protection completes the setup. Our fall protection equipment group, led by Werner, covers full body harnesses, shock-absorbing lanyards, self-retracting lifelines and anchors, along with hard hats from the Bullhead Safety line by Global Glove. OSHA’s construction rules in 29 CFR 1926.501 call for fall protection on unprotected sides and edges 6 feet or more above a lower level. A harness, a connector and an anchor only work as a system, so that equipment is best chosen together.
Our team helps you select the right products for the roof and the crew, matching hoists, brackets and personal protection into one quote.
Siding, Framing and Job Site Equipment Built for Contractors in Every Trade
Some trades need one specialist tool. Siding brakes from Van Mark and Alum-A-Pole bend aluminum and vinyl trim coil on site, so a siding crew can form corners, sills and fascia to fit rather than ordering them. Wall jacks from Proctor raise a framed wall into place with fewer hands, which matters most on long walls and small framing crews.
Every site also needs somewhere to lock up tools overnight. Our job site boxes group compares Knaack chests, cabinets and rolling units by size and the way they secure. These three groups are smaller than the rest, but each covers equipment contractors in those trades use every working day, and each sits alongside the ladders and staging the same crews already run.
You can see siding brakes and job site boxes in person at our Windham, NH or Worcester, MA showroom, where the consultation is free.
How Contractors Narrow Down Equipment by Load, Vehicle and Crew Size
Three questions settle most of the choices contractors face across every group. The first is load. Ladder duty ratings run from Type II at 225 pounds to Type IAA at 375 pounds, and OSHA counts the climber, tools and materials together, so a roofer carrying bundles needs more rating than a painter with a brush. Scaffolds, planks and anchors carry their own ratings, and the heaviest person on the crew with a full tool belt sets the number to meet.
The second question is the vehicle. Pickup beds differ in rail width, which is why crossover boxes and truck racks come in several lengths, and van shelving is built to the wheelbase and roof height of a specific van. Measuring rail to rail, or noting the van model and roof, before choosing saves contractors a return. The third question is the crew. A two person siding crew gets more from a pump jack system or a siding brake than from extra ladders, while larger contractors often standardize one rack, box and harness across the fleet so any worker can use any vehicle.
Send us the job, the vehicle and the crew size, and we put the equipment together in one quote, by phone at 603-434-6911 or 508-754-3030.
Equipment for Contractors Across Every Brand We Carry
Each group draws on makers with their own pages, from Werner ladders and fall protection to Holman van shelving. Comparing makers side by side helps when contractors already run one brand and want equipment that matches what is on the truck.
To see every manufacturer behind these groups, visit our ladder and truck equipment brands hub.
Quotes on Equipment for Contractors
Nation Wide Ladder quotes equipment for contractors from showrooms in Windham, New Hampshire and Worcester, Massachusetts, and our own trucks deliver door to door across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine, with weekly runs to Maine and shipping anywhere in the US.
Equipment FAQs
What equipment for contractors do you carry?
Ladders, staging planks, scaffolding, truck tool boxes, truck ladder racks, bed slides, van shelving and racks, roofing equipment, fall protection, siding brakes, wall jacks and job site boxes.
How are the best sellers chosen?
They are the flagship models in each category among the brands we carry, the lines contractors specify most often.
Do you install truck and van equipment?
Yes. We install truck racks, truck tool boxes, transfer tanks, van shelving and other vehicle equipment.
Which equipment suits work near power lines?
Fiberglass ladders, since OSHA calls for nonconductive side rails wherever a worker or ladder could contact exposed energized equipment.
Can contractors see equipment before buying?
Yes. Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, with Saturday morning hours at both.
Do you deliver equipment outside New England?
Our own trucks deliver across New England, and we ship anywhere in the US.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.

















