Werner Retractables & Lifelines

Werner 9 ft SRLs for Wrap-Around and Anchor-Mounted Tie-Off, in Bantam Tie-Back, Leading Edge and Switch Models and More

Why the longest Bantam working length belongs to tie-back and Switch units, how a tie-back hook forms its own anchor, and the 24 versus 32 inch arrest distances to plan around.

You reach for Werner 9 ft SRLs when there is no ready anchor point overhead, or when you would rather carry the housing on the anchor than on your back. Nation Wide Ladder helps you choose between Bantam tie-back units that wrap a beam and clip back to their own web, in Class 1 single and twin leg or Class 2 leading edge builds, and the Bantam Switch in single and twin leg, snap or rebar hook versions, checking the structure you will tie to first.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Werner Gives Its Tie-Back Bantams a 9 ft Line

A tie-back unit spends part of its web wrapped around the member it anchors to, so it starts from a longer line than a standard Bantam. On the R430006TB, the hook is the anchorage connector, so you pass the web around a beam or similar member and clip the steel tie-back snap hook straight back onto the web. That turns the structure into the anchor without a separate strap, which is why Werner sizes these units longer than its standard 6 foot Bantam web line.

Werner states the working length plainly. The Class 1 tie-backs carry a 9 foot working length, and the Class 2 R430006LE-TB lists 9 feet of working length with a 6 foot tie-back length. Only tie-back models may be wrapped and clipped back this way, because Werner lists a standard snap hook clipped back onto its own line among the connections that can roll out. The 2021 standard also added an abrasion test for tie-back units.

Ironworkers and steel crews who meet bare members more often than installed anchors are the usual buyers of Werner 9 ft SRLs. Other lengths and anchors sit in our Werner self-retracting lifelines range.

Our team asks what members your crew will wrap and their size before quoting a 9 ft tie-back, so the hook and web suit the steel.

Werner Fall Protection R430006LE-TB 9FT Bantam Tie-back Web Self-Retracting Lifeline

Tie-Back Twin Legs, Leading Edge Tie-Backs and Switch Models at Werner 9 ft

The single R430006TB tie-back Bantam comes with a carabiner. Twin legs use the same adaptor split as other Werner Bantam SRLs, so the R431006TB joins through the A100341 carabiner adaptor, the R433006TB through the A100531 pin adaptor and the R434006TB through the A100331 SRL adaptor.

For tie-off at a leading edge, the R430006LE-TB and twin leg R433006LE-TB leading edge tie-back are Class 2 units with an aramid and UHMWPE web blend, a steel harness web connector and a backpack style energy absorber, at just over 4 pounds per unit.

The Bantam Switch takes the opposite approach. On the R530809 and R530809-SR singles and the R534809 and R534809-SR twin legs, the anchor carries the housing and 9 feet of 3/4 inch UHMWPE web runs down to the harness, leaving the back D-ring open. Werner lists the R530809 at 3.75 pounds, with snap hook or small rebar hook options. Because the housing hangs at the anchor, the worker carries almost none of its weight through the shift.

Tie-backs and Switch units for Maine steel crews can travel on our regular weekly delivery run from New Hampshire.

Werner Fall Protection R430006TB 9FT Bantam Tie-back Web Self-Retracting Lifeline W/ Steel Tie-back Snap Hook

Arrest Distance, Class and Clearance Across Werner 9 ft SRLs

These Werner SRLs do not share one arrest figure at 9 feet, so read each label. Werner rates the Class 1 tie-backs to a 24 inch maximum arrest distance with an average arrest force of 900 pounds and workers up to 400 pounds. The R430006LE-TB is listed at under 32 inches when used overhead, and the Bantam Switch at under 32 inches with average arrest force under 900 pounds.

Class matters as much as the number. The Class 1 tie-backs and Switch units belong at or above the back D-ring, while the LE tie-backs are tested and approved over steel beam, precast concrete and B-deck for leading edge work, with their foot-level arrest distance printed on the label as ANSI Z359.14-2021 requires.

A longer line also lets a worker drift further from the anchor, which adds swing if a fall happens off to the side. Werner ties total clearance to anchor position and the model, using the user instructions shipped with each unit, so plan from those before work starts.

At our Windham NH and Worcester MA showrooms we can hand you a tie-back and a Switch unit so your crew can feel how each one connects.

Werner Fall Protection R431006TB 9FT Bantam Twinleg Tie-back Web Self-Retracting Lifeline W/ Steel Tie-back Snap Hook

Werner 9 ft Tie-Back Units on the Wider Steel Job

A tie-back unit solves the anchor on the member itself, yet the crew still needs harnesses with suitable D-rings, a rescue plan and a safe way up to the steel, from ladders to lifts and staging. Those usually come from several manufacturers, and Werner units have to work with whatever harness and access gear the crew already uses.

For the makers behind that access gear, take a look through our ladder and truck equipment brands hub.

Werner Fall Protection R433006LE-TB 9FT Bantam Twinleg Tie-back Web Self-Retracting Lifeline

Quotes on Werner 9 ft SRLs by Anchor Type and Leg Count

Class 1 and leading edge tie-backs that form their own anchor and Switch units that carry the housing at the anchor give steel and deck crews two distinct ways to use a 9 ft line. Tell us the members you will wrap or the anchors in place, the hook style and leg count, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner 9 ft SRLs to suit. Browse our Werner store or go back to the Werner brand page.

Werner 9 Ft SRLs FAQs

Why are Werner tie-back SRLs 9 ft rather than 6 ft?

Part of the web wraps around the member you anchor to. Werner gives the Class 1 tie-backs a 9 foot working length, and lists the R430006LE-TB with a 9 foot working length and a 6 foot tie-back length.

Can I wrap any Werner 9 ft SRLs around a beam and clip back to the web?

Only the tie-back models, whose hook is designed to connect back to the web. Werner warns that a standard snap hook clipped back onto its own line can roll out.

Which Werner 9 ft SRLs suit leading edge work?

The Class 2 R430006LE-TB and twin leg R433006LE-TB, approved over steel beam, precast concrete and B-deck.

What arrest distance do Werner 9 ft SRLs have?

Werner lists 24 inches for the Class 1 tie-backs and under 32 inches for the LE tie-back used overhead and for the Bantam Switch.

What makes the 9 ft Bantam Switch different?

Its housing clips to the anchor instead of your harness, so you carry almost none of its weight and the back D-ring stays free for other equipment or rescue.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder