Werner range

Werner Fall Protection Harnesses in Positioning, Construction, Climbing, Arc Flash and Other Models

LiteFit, Blue Armor and ProForm families with back, hip, front and shoulder D-ring layouts, Hi-Viz and welding versions, OSHA arrest limits, fit and inspection.

Werner fall protection harnesses provide the body support in a personal fall arrest system for roofers, ironworkers, utility crews, concrete trades and maintenance teams, and the challenge is matching D-rings, buckles and fit to the task before anyone ties off. Nation Wide Ladder helps you make that match across the LiteFit, Blue Armor and ProForm families, in standard, positioning, construction, climbing and retrieval layouts, plus Hi-Viz, arc flash and welding models.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Which Crews Need Werner Fall Protection Harnesses on Site

Werner notes that fall protection becomes required at 6 feet in construction and 4 feet in general industry, so a full-body harness is standard kit for roofing, steel erection, concrete forming, utility climbing, warehouse work and facility maintenance. OSHA has not accepted body belts as part of a personal fall arrest system since January 1, 1998, which leaves the harness as the body support for any arrest system.

Specific trades get specific Werner versions. Concrete and general construction crews can choose LiteFit Plus and LiteFit Select harnesses that carry a removable body belt for tools and a twin leg spacer, which gives twin self-retracting lifelines a connection point. Welders have the Werner H913004 with Kevlar webbing to resist spatter. Where a harness is shared from a gang box, Werner pairs quick connect chest buckles with tongue buckle legs on models such as the Blue Armor H112004, a setup it describes as easy to refit for a different wearer.

OSHA also limits what a harness may do. The fall arrest attachment has to sit at the center of the back near shoulder level or above the head, and fall protection components may only protect workers, never hoist materials.

Over 50 years of supplying contractors means we can sort a mixed crew into the right Werner fall protection harnesses by trade rather than one model for everyone.

Werner Fall Protection Blue Armor H112004 Standard (Back D-ring) Harness (XL)

Werner Harness Families, D-Ring Layouts and Fall Protection Types

Werner positions LiteFit around fit and value, Blue Armor for demanding job sites, ProForm F3 as an athletically styled harness and ProForm SP with built-in self-rescue. Blue Armor models add relief handles for a gravity-override position after a fall, WebAlert inspectable webbing, impact indicators and five-point adjustment. The ProForm SwitchPoint H063144 climbing and construction harness adds Werner SwitchPoint suspension technology.

Within each family, the model name tells you the D-ring layout. Standard models have a single back D-ring for fall arrest. Werner positioning harnesses add hip D-rings, Werner construction harnesses such as the Blue Armor H133104 carry three D-rings for general building work, Werner climbing harnesses add a front D-ring, and retrieval models such as the H143004 add shoulder D-rings. Werner arc flash harnesses such as the H934004 use Kevlar webbing and dielectric hardware. Hi-Viz models with green webbing and the M2100 positioning belt round out the range.

Our team checks each layout against the tasks you list, so the fall protection on your quote matches the work rather than the catalog.

Werner Fall Protection Arc Flash H934004 Harness Positioning (Back And Hip D-rings), Dielectric Pass Thru Legs (XL)

How Werner Harnesses Fit a Complete Fall Protection System

A harness is one link in a chain that runs from the anchor through the connector to the worker, and it only performs when every link is chosen together. Roofers pair a harness with a roof anchor and a self-retracting lifeline, steel crews with beam anchors and twin leg connectors, and ladder crews with the climbing system on a fixed ladder. Getting to the roof or the steel is part of the same job, so ladders, staging and the racks that carry them come into the plan as well, often from several manufacturers. Planning the whole chain at once keeps ratings and connection points consistent.

For the ladders, racks and staging that get your crew up there, you can review every manufacturer we carry in our ladder and truck equipment brands hub.

Werner Fall Protection Arc Flash H934104 Harness Construction (Back And Hip D-rings), Dielectric Pass Thru Legs (XL)

Fall Protection Standards and OSHA Limits for Werner Harnesses

Werner descriptions for its arc flash and welding harnesses cite ANSI Z359.11 and OSHA 1926 and 1910, and the arc flash models also meet ASTM F887. Under OSHA 1926.502, a personal fall arrest system used with a body harness must hold the arresting force to 1,800 pounds or less, limit free fall to 6 feet and keep deceleration distance to 3.5 feet.

OSHA hardware rules apply to every harness. D-rings and snap hooks must reach at least 5,000 pounds in tensile strength and be proof-tested to 3,600 pounds without cracking, breaking or permanent deformation. Connectors have to be drop forged, pressed or formed steel, or an equivalent material, with a corrosion-resistant finish, and the webbing must be synthetic fiber. Werner Blue Armor descriptions specify a forged alloy steel back D-ring, and WebAlert inspectable webbing, updated as WebAlert 2 on ProForm F3, is designed to make wear easier to spot. Body belts remain acceptable under OSHA only in positioning systems, which is how the Werner M2100 belt is meant to be used.

At our Windham and Worcester showrooms you can handle the hardware and compare fall protection features in person before you choose.

Werner Positioning Belt – M2100

Choosing and Fitting Werner Fall Protection for Each Task

Choose the D-ring layout from the task. Fall arrest alone needs only the back D-ring, rebar or pole work calls for hip rings, ladder climbing systems use the front ring and confined space entry calls for shoulder rings for retrieval. Werner stresses that a harness protects only when it fits, so adjust every strap before work starts. Pair it with connectors from our Werner lanyards range or a self-retracting lifeline.

Quick connect buckles are the fastest to clip and release, tongue buckles are simple to reset for a different wearer, and the arc flash models use pass-thru legs with dielectric hardware. Crews running personal SRLs on their backs benefit from the integrated SRL bumper on ProForm F3 harnesses, which protects the lower back. Post-fall features matter too, because relief handles, relief cords and SwitchPoint each give a suspended worker a way to ease pressure while the rescue plan is carried out. Most Werner models offer five-point adjustment, so set every point snug before the shift starts.

Send us the trades and sizes on your crew as a list, or call 603-434-6911 or 508-754-3030, and we will quote Werner fall protection to match.

Werner Fall Protection Blue Armor H122004 Climbing (Back And Front D-rings) Harness (XL)

Inspecting and Retiring Werner Fall Protection Harnesses

Werner calls for an inspection before each use and at least once a year by a competent person other than the user, and it recommends walking down the harness so the wearer understands how it behaves in a fall. Remove any harness with wear, damage or a deployed impact indicator from service, and never reuse fall protection that has arrested a fall. Werner does not mandate a fixed five-year service life, so condition, not age alone, decides retirement. A rescue plan is required, which is where relief handles and cords help a suspended worker wait more safely.

Werner offers Fall Protection Safety 101 with a recognized certificate, an online Fall Protection Core course for trades, supervisors and facility managers, and instructor-led training at the worksite. Pairing new fall protection with that training gives the crew a documented record for the employer’s files.

A harness pulled from service late in the week can be replaced on a Saturday morning, when both of our locations are open.

Werner Fall Protection Arc Flash H914004 Harness Standard (Back D-ring), Dielectric Pass Thru Legs (XL)

Why Crews Order Werner Fall Protection Harnesses From Us

Compare sizes and models in our harness category or return to the Werner brand overview. We quote Werner fall protection harnesses by trade and size, and our own trucks deliver them door to door across New England.

Werner Fall Protection Harnesses FAQs

What is the difference between Werner Blue Armor and LiteFit fall protection harnesses?

Werner positions LiteFit around fit and value, and Blue Armor for demanding job sites, with features such as WebAlert inspectable webbing, impact indicators and five-point adjustment.

Which D-rings do I need on Werner fall protection harnesses?

A back D-ring handles fall arrest. Add hip rings for work positioning, a front ring for ladder climbing systems and shoulder rings for retrieval.

How often should Werner fall protection be inspected?

Before every use, plus at least once a year by a competent person other than the user.

Does a Werner harness expire after five years?

Werner does not mandate a five-year service life. A harness leaves service when inspection finds wear or damage, or after it arrests a fall.

Can I use a body belt for fall protection?

Not for fall arrest. OSHA has not accepted body belts in personal fall arrest systems since 1998, and belts such as the Werner M2100 are for positioning.

Which Werner harnesses suit arc flash work?

Werner arc flash models such as the H934004 use Kevlar webbing and dielectric hardware, and Werner cites ANSI Z359.11 and ASTM F887 for them.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder