Werner Retractables & Lifelines
Werner Bantam SRLs, Compact Self-Retracting Lifelines in Web, Cable, Tie-Back, Twin Leg and Switch Builds, and More
Personal retractables worn at the back D-ring or hung from the anchor, compared by part number, hook, leg count, ANSI class, arrest distance and worker capacity.
Werner Bantam SRLs answer a common problem on low-clearance work, where a fixed 6 foot lanyard needs more room under the worker than the job allows and a full-size retractable is heavy to wear all shift. Nation Wide Ladder helps crews pick the right SRLs from a family that spans compact web and cable units, Class 1 overhead models and Class 2 leading edge versions, single and twin legs, tie-back hooks, and the Bantam Switch that hangs its housing at the anchor instead of the harness.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Werner Bantam SRLs Suit on Steel, Concrete and Roof Work
We point crews toward Werner Bantam SRLs when the job calls for a personal retractable that rides at the back of the harness all day without dragging on the shoulders. Werner puts a single web unit at just over 2 pounds, small enough to sit in one hand, so a steel erector, rebar placer or roofer can keep it clipped on through a full shift rather than leaving it in the gang box.
Short working lengths are part of the design. Most of these SRLs run 6 feet, with 8 or 9 feet on the cable, tie-back and Switch versions, which keeps each unit compact. That matters most where clearance under the work is tight, such as the first lifts of a steel frame, a mezzanine edge or a low roof, because Werner rates the overhead Class 1 Bantam SRLs to stop a fall within 24 inches.
Concrete and deck crews get their own options. Bantam SRLs with rebar and form hooks clip straight onto reinforcing steel, and the leading edge versions are built for anchorage at or under the back D-ring, where Werner allows only edge-tested units. Longer retractables and lifeline systems sit in our wider Werner retractables and lifelines range.
Our team checks your anchor position, clearance and hook needs before you order, so the Werner Bantam SRLs on your quote match how your crew ties off.
Reading Werner Bantam Part Numbers, from Hook Suffix to Twin Leg Adaptor
Werner part numbers on these SRLs follow a simple pattern. The R430006 is the base 6 foot web unit in a high-impact nylon housing with a swivel top, a standard snap hook and an included carabiner. Add -R for an aluminum rebar hook or -SR for a steel rebar or form hook, while Werner Bantam SRLs with a TB suffix carry a tie-back hook made to wrap a member and clip straight back to the web, on a 9 foot line.
Twin leg numbers tell you how the two units join. The R431006 pairs two units for 100 percent tie-off, the R433006 joins them with the included A100531 TwinLeg Pin Adaptor, and the R434006 uses a twin leg SRL adaptor. Werner lists the R433006 at just under 5 pounds, and steel-hook twin legs at just over 7 pounds on our product listings.
Two more Werner branches round out the family. LE in the number marks a Class 2 leading edge unit, such as the R430006LE in a Kevlar and UHMWPE web blend or the R410008LE cable unit, each with a compact backpack style energy absorber and a steel harness web connector. The Bantam Switch models, numbered R5308 and R5348, mount the housing at the anchor and come in 6 or 9 foot lengths with a snap hook or a rebar hook, such as the R530809 Bantam Switch.
Mixed orders of Bantam singles, twin legs and Switch units travel on our own trucks door to door across New England, and we ship anywhere in the US.
Werner Bantam SRLs Ratings for Arrest Distance, Force and Worker Weight
Werner certifies the standard Bantam web units to ANSI Z359.14-2021 as Class 1 devices, meaning anchorage at or above the back D-ring, and to OSHA 1910.140 and 1926.502. Attached overhead, they hold the maximum arrest distance to 24 inches and keep average arrest force to 900 pounds, and Werner rates them for workers up to 400 pounds. The cable and web LE models carry Class 2 approval for leading edge work over steel beam, precast concrete and B-deck, with the same 24 inch figure when anchored overhead.
The Bantam Switch reads slightly differently. Werner lists it as Class 1 under the 2021 standard, with an arrest distance under 32 inches and average arrest force under 900 pounds, so plan clearance from its own figures rather than borrowing the web unit numbers. Because the housing sits at the anchor, the back D-ring stays free for other equipment or for rescue.
OSHA adds a strength floor of its own. A self-retracting lifeline that limits free fall to 2 feet or less must sustain at least 3,000 pounds of tensile load, and the anchorage behind any personal fall arrest system needs to carry 5,000 pounds per attached worker unless a qualified person designs it with a safety factor of two.
At our Windham NH and Worcester MA showrooms we can set Class 1, leading edge and Switch SRLs side by side so you can compare the labels before choosing.
Inspecting, Pairing and Retiring Bantam SRLs in Daily Use
Werner asks for every SRL to be checked before each use and inspected at least once a year by a competent person other than the wearer, and it does not require a yearly factory recertification. The standard Werner units carry durable labels and a shock pack cover to make that check quicker. Pull a unit from service if it has stopped a fall, if the load indicator shows, if the snap hook will not work, if the web is worn, or if the line fails to lock and release when tested.
Connection rules matter just as much with a twin leg. Werner says never to clip a lanyard onto an SRL to gain reach and never to put two snap hooks on one D-ring, which is why the twin leg SRLs join through a purpose-built adaptor. Werner also lists a snap hook clipped back onto its own web among the connections that can roll out, so only the tie-back models should wrap a member and connect back to the line.
Replacement Werner Bantam SRLs for Maine crews can ride our regular weekly delivery run from New Hampshire.
How Werner Bantam Units Fit the Rest of the Tie-Off Kit
Any of these SRLs is only one link between a harness and an anchor. The same crew also needs a harness with a suitable D-ring, an anchor rated for the load and a safe way up to the work, whether that is an extension ladder, staging or a lift, and those pieces often come from different makers.
When you want to weigh Werner against other makers for that wider kit, open our ladder and truck equipment brands hub.
Ordering Werner Bantam SRLs for Your Crew
Short 24 inch arrest distances, a choice of hooks and leg counts and the anchor-mounted Switch give low-clearance crews Werner SRLs for most tie-off setups. Tell us the anchor position, worker weights and hook style, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner Bantam SRLs to match. Browse the range in our Werner store or step back to the Werner brand overview.
Werner Bantam SRLs FAQs
How much does a single Werner Bantam weigh?
Werner lists the single R430006 web unit at just over 2 pounds. Twin leg assemblies run about 5 pounds, or just over 7 pounds with steel hooks.
Which Bantam SRLs can be used at a leading edge?
Only the models with LE in the part number. They are Class 2 units that Werner has tested and approved over steel beam, precast concrete and B-deck.
What makes the Bantam Switch different from other Bantam SRLs?
Its housing connects to the anchor rather than the harness D-ring, which takes nearly all of its weight off the worker and leaves the D-ring free. Werner lists an arrest distance under 32 inches for it.
What do the -R and -SR suffixes mean on Werner Bantam SRLs?
They mark the hook. -R is an aluminum rebar hook and -SR a steel rebar or form hook, while models with no suffix use a standard snap hook.
Can I clip a lanyard onto a Bantam for more reach?
No. Werner says a lanyard must never be attached to an SRL. If you need more working length, choose a longer unit such as a 9 foot tie-back or Switch model.
How heavy a worker can Werner Bantam SRLs hold?
Werner rates the standard Bantam web units for workers up to 400 pounds.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.










