Werner Retractables & Lifelines

Werner Baseline SRLs, Aluminum-Housed Web Retractables in 7 and 11 Foot Single, Twin Leg and XAC Versions, and More

Class 1 personal retractables with UHMWPE and polyester webbing, compared on working length, hook style, twin leg setup, arresting force and the engraved details behind inspection records.

Werner Baseline SRLs suit crews who want a personal retractable in a rugged aluminum housing that protects the internal brake, while still stopping a fall within 24 inches when anchored overhead. Nation Wide Ladder helps you choose among 7 and 11 foot single units, 7 foot twin legs, snap, aluminum rebar and steel rebar hooks, and the XAC models with a published 900 pound arresting force.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Crews Pick Werner Baseline SRLs for Hard Daily Use

We see Werner Baseline SRLs chosen by crews who want a personal retractable worn at the back but expect it to get knocked around on site. Werner wraps the braking mechanism in an aluminum housing with a swivel top, pairs it with UHMWPE and polyester webbing, and supplies a carabiner with each unit. Werner SRLs of this kind suit general construction, maintenance and plant work where the crew ties off overhead.

Lengths stay short and practical. The 7 foot models cover close work around one anchor, while the 11 foot models give a larger work area, which suits a tech working around a piece of equipment or a roofer covering more of a section from one tie-off point. Every one of these Werner SRLs is a Class 1 device, built for anchorage at or above the back D-ring rather than at foot level.

For tie-off at a leading edge or under the D-ring, crews need an edge-rated Class 2 unit from elsewhere in our Werner retractables and lifelines range.

Having supplied contractors for over 50 years, we ask how hard your crew is on its gear before recommending a Baseline length or hook.

Werner Fall Protection R530007 7FT Baseline Web Self-Retracting Lifeline

Werner Baseline Models Compared, from Twin Legs to the 11 Foot XAC

The R530007 is the 7 foot starting point with a snap hook, joined by the R530007-R with an aluminum rebar hook and the R530007-SR with a steel rebar hook, and Werner lists the R530007 at about 3.5 pounds. The 11 foot Werner line follows the same pattern with the R530011, R530011-R and R530011-SR, plus the R530011W.

Twin leg versions keep a worker connected while moving between anchors. The R531007 Baseline twin leg pairs two 7 foot legs for 100 percent tie-off, again with snap, -R or -SR hooks, so one leg stays clipped while the other moves.

Hook choice follows the anchorage rather than habit. A snap hook suits an anchor strap or similar connector, while the -R models carry an aluminum rebar hook and the -SR models a steel one, both made for clipping onto reinforcing steel. Werner SRLs must never be extended with a lanyard clipped to the line, so if 7 feet will not reach, step up to the 11 foot models rather than adding length.

The XAC models, the R530007XAC and R530011XAC 11 foot Baseline, are the ones where Werner publishes a maximum arresting force of 900 pounds alongside the 24 inch arrest distance, and the 11 foot XAC ships with an aluminum carabiner. Werner lists the R530011XAC at about 4 pounds.

Twin legs and single Werner SRLs can ship together on our own trucks, which deliver door to door across New England.

Werner Fall Protection R530007-R 7FT Baseline Web Self-Retracting Lifeline W/ Aluminum Rebar

Ratings, Records and Inspection for Werner Baseline Retractables

Werner certifies Baseline SRLs to ANSI Z359.14-2021 Class 1 and to OSHA 1910.140 and 1926.502. Every model holds the maximum arrest distance to 24 inches, well inside the 42 inches the 2021 standard permits for Class 1, which helps where clearance under the work is short. The 2021 edition also raised the drop test weight to 310 pounds and the static hold to 3,600 pounds.

Inspection records are where the Baseline helps most. Werner engraves the serial number and date of manufacture into each housing rather than relying on a label alone, which makes the annual competent-person inspection that Werner calls for easier to log against the right unit.

Before each use, check that the line pulls out and locks cleanly and that the web shows no cuts or wear. Werner names five triggers for taking an SRL out of service, namely an arrested fall, a visible load indicator, an inoperable snap hook, worn or kinked webbing, and a line that fails to lock or release.

Both of our locations open on Saturday mornings, which gives a foreman a window to replace a retired unit before the next shift.

Werner Fall Protection R530007-SR 7FT Baseline Web Self-Retracting Lifeline W/ Steel Rebar

Werner Baseline Retractables Within the Wider Tie-Off System

A retractable joins a harness to an anchor, and both ends need as much thought as the unit itself. The anchor must carry the load for each worker, the harness needs a back D-ring suited to the connection, and the crew still needs ladders or staging to reach the work, often from other manufacturers. On a roof, that can mean an anchor set before the first worker reaches the edge.

If you are comparing suppliers for the rest of that kit, start from our ladder and truck equipment brands hub.

Werner Fall Protection R530007XAC 7FT Baseline Web Self-Retracting Lifeline

Ordering Werner Baseline SRLs Matched to Your Crew

An aluminum housing, a 24 inch arrest distance and engraved inspection details make the Baseline a durable choice for personal tie-off. Send us the lengths, hooks and leg counts you need as a list, or call 603-434-6911 or 508-754-3030, and we will quote Werner Baseline SRLs for your crew. Compare the lineup in our Werner store or return to our Werner overview.

Werner Baseline SRLs FAQs

What lengths do Werner Baseline SRLs come in?

7 and 11 feet in single units, with a 7 foot twin leg version, the R531007.

How do the Baseline XAC models differ?

Werner publishes a 900 pound maximum arresting force for the R530007XAC and R530011XAC, alongside the 24 inch arrest distance shared by every Baseline, and the 11 foot XAC comes with an aluminum carabiner.

Are Werner Baseline SRLs approved for leading edge work?

No. They are Class 1 units for anchorage at or above the back D-ring. Edge or foot-level tie-off needs a Class 2 leading edge unit.

What housing do Baseline SRLs use?

A rugged aluminum housing with a swivel top that protects the internal braking mechanism.

Do Werner Baseline SRLs need recertifying every year?

No. Werner asks for an inspection before each use and at least once a year by a competent person other than the user, and the engraved serial number and date of manufacture help track each unit.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder