Brand spotlight

Van Mark Brakes, From Light-Duty Trim Brakes to the Industrial Metal Master, With Cutters, Gauges, Stands and More

Portable bending brakes built in Farmington Hills, Michigan since 1964, graded by throat depth and published bending limits, with the cutting, measuring and coil-feeding tools that mount on them.

Forming trim, flashing and roofing metal on site calls for a brake matched to the metal, and Nation Wide Ladder supplies Van Mark brakes, with our team checking each model against your work and our trucks delivering across New England. We stock the light-duty Mark I Series, the pro-grade TrimMaster, the Metal Master 20 and the Industrial Metal Master 20 EZ, along with the TrimCutter, Multi Gauge, CD24 Coil Dispenser, UniStand stands, Trim-A-Table and tune-up kits.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Van Mark brakes for siding, trim and metal roofing work

Van Mark designs portable bending brakes and the tools that work alongside them, built in Farmington Hills, Michigan by a family-owned company that patented its first job site brake in 1964. Siding installers use the brakes to fold aluminum trim coil into wraps, J-channel pockets and fascia right at the house. Roofing and post frame crews turn to the heavier models for painted steel valley pans, rake edges and ridge caps. Each brake is graded by throat depth and published bending limits, so buyers can match the tool to the metal they handle most.

Every Van Mark product we stock sits in one category, Siding Brakes and Accessories. The brake side runs from the light-duty line through the TrimMaster and Metal Master 20 to the Industrial Metal Master 20 EZ. The support side adds the TrimCutter, Multi Gauge, CD24 Coil Dispenser, UniStand stands, the Trim-A-Table and tune-up kits. Open that category to compare capacities and lengths before you request pricing.

Van Mark Brakes History, a Family Business Built Around the Portable Brake

Gene Van Cleave founded Van Mark in Detroit in 1964 and patented the Trim-A-Brake, a bending brake light enough to carry to the house. The company moved into a larger plant in Farmington Hills, Michigan in 1972, where it still builds. Over the following years it added portable saw tables, the Trim-A-Slitter and the Trim-A-Table cutting table, then in 1983 introduced the first cam-operated portable brake able to fold a 180 degree hem, sold as the Mark I “50” Series.

The line kept moving toward heavier work. An industrial brake for metal roofing and post frame builders arrived in 1992, and between 1999 and 2003 the company introduced the TrimMaster, the TrimCutter, the Coil Dispenser and the UniStand. The Metal Master series brought a 20 inch throat in 2008, the Multi Gauge followed in the early 2010s, and lighter, stronger castings for the 20 inch and 14 inch brakes came out in 2018 and 2022. Van Mark celebrated 50 years as a family-owned business in 2014 and its 60th anniversary in 2024, and it sorts its brakes into clear grades, publishes bending limits by metal and keeps wear parts available for brakes it built decades ago.

We have served homeowners and contractors for over 50 years, so a brake you buy from us comes with a team you can still call about parts and setup years later.

Van Mark 3001 – Trim-A-Table legs

Van Mark Brakes and Accessories We Supply

We group the Van Mark line into a single category, Van Mark siding brakes and accessories. On the brake side we stock the light-duty Mark I Series, the pro-grade TrimMaster, the Metal Master 20 and the Industrial Metal Master 20 EZ, which ships with a Master Stand EZ. On the accessory side we carry the TrimCutter, the Multi Gauge, the CD24 Coil Dispenser, UniStand Adjustable stands, the Trim-A-Table cutting table with its legs, and tune-up kits.

Accessories ride on the brake itself. On cam-lock models, the Power Lock bar carries AccuTrack rails, which is where the TrimCutter, TrimFormer and Multi Gauge mount, so a crew can cut and measure without moving the stock off the brake. The Coil Dispenser works differently, standing free on two non-marring rollers with a quick-release tension roller that keeps coil from unraveling or catching the wind while it feeds in. It sets up beside most brakes, saw tables and slitters, so stock can be cut to length as it comes off the roll.

Tell us the metal you bend and how your crew sets up at the truck or van, and our team will put together the Van Mark brake and accessories that suit it.

Van Mark CD24 – Coil Dispenser

Van Mark Brake Grades, Throat Depths and Published Capacities

Van Mark sorts its brakes by grade and throat depth. The light-duty and TrimMaster brakes have a 14 inch throat, while the Metal Master 20 and Industrial Metal Master 20 reach 20 inches, which takes wider panels. Capacity climbs with grade. Van Mark rates the light-duty line and the Metal Master 20 for aluminum up to 0.027 inch and the TrimMaster up to 0.032 inch, with all three handling 29 gauge galvanized, painted and stainless steel and 24 ounce soft copper. The Industrial Metal Master 20 EZ steps up to 0.050 inch aluminum, 20 gauge galvanized steel, 24 gauge painted and stainless steel and 36 ounce copper.

The company notes that these limits assume standard metal properties and suggests contacting the factory about unusual material. Its cam-lock models pair an aluminum cam with a UHMW polyethylene wedge, use two castings per clamping station and carry a Power Lock bar with a 150 degree bending radius that makes 180 degree hems easier. Each brake carries a one-year limited warranty and is made in the USA.

Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can check your metal against these Van Mark ratings with our team.

Van Mark TAT60 – Trim-A-Table

Van Mark Brakes in a Complete Siding and Roofing Setup

A brake is one station on an exterior job. Siding crews pair it with ladders or pump jack staging for the wall, and roofing crews with racks on the truck or van that carry coil, panels and a brake up to 14 ft 6 in long between jobs. Choosing those pieces together keeps the brake length, the rack and the vehicle in step.

To compare the other makers behind that setup, head to our ladder and truck equipment brands hub.

Van Mark TM series – Mark II TrimMaster®

Picking Van Mark Brakes by Metal, Throat, Length and Support Gear

Start with the stock you bend most. Aluminum trim coil work falls comfortably within the 14 inch brakes, and the TrimMaster gives the most aluminum capacity in that group. Its POWERslot hinge sets a 5/8 inch hem for tighter J-channel pockets, while the light-duty brake uses a traditional hinge that sets a 3/4 inch hem. For wide pieces such as soffit or broad fascia, the 20 inch throat of the Metal Master 20 gives more reach, and crews bending painted steel for valley pans, rake edges or ridge caps should look at the Industrial Metal Master 20 EZ, which Van Mark designed around 24, 26 and 29 gauge painted steel.

Length comes next. The lighter lines run from 2 ft to 12 ft 6 in and the Industrial Metal Master from 6 ft 6 in to 14 ft 6 in. A 10 ft 6 in brake bends a full-length trim piece in one pass, but weight rises with length and grade, so a 10 ft 6 in TrimMaster weighs 123 pounds while the matching Industrial Metal Master weighs 259, and either has to fit the truck or van that carries it. Finally, plan the support gear, since a stand sized to the throat, a Van Mark TrimCutter for clean cut-offs and a Van Mark tune-up kit for common wear parts all keep a brake productive.

Our own trucks deliver door to door across New England, with regular weekly deliveries to Maine from New Hampshire, so a 259 pound industrial brake reaches your shop without a pickup run.

Van Mark MM series – Industrial Metal Master® 20 EZ

Keeping Van Mark Brakes in Tune With Kits and Serial Numbers

Van Mark designs its cam brakes to avoid metal-on-metal contact at critical points, but vinyl strips, wedges, pull pins and springs still wear with use. Tune-up kits bundle those parts by model, with legacy kits for older models, and the company uses standard off-the-shelf fasteners, so replacing a nut or pull pin with standard hardware leaves the warranty intact. The TrimCutter and Multi Gauge fit current cam-locking Van Mark models, and Van Mark asks owners of older models to call and confirm fit.

Kits by model include 3157 for the pro-grade TrimMaster, 3913 for the Metal Master 20 and 3914 for the Industrial Metal Master 20 EZ, which keeps a reorder simple once you know what you own. When ordering wear parts, have the model and serial number of your brake handy, since Van Mark asks for both so the correct tune-up kit or replacement part goes out.

Both of our locations open Saturday mornings, so you can bring your model and serial number in and sort out the parts list with us.

Van Mark IM Series – Industrial Metal Master 20 With Master Stand EZ Included

Request Pricing on Van Mark Brakes

From a light-duty brake for trim wraps to a 14 ft 6 in industrial machine for a roofing crew, we match Van Mark brakes to the metal you bend and quote them with the stands and cutters that let you form trim right at the truck or van. Send a quote request with the model, length and accessories you need, call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, or browse the full Van Mark range in our store.

Van Mark Brakes FAQs

Where are Van Mark brakes made?

Van Mark builds its brakes in Farmington Hills, Michigan, where the company has been based since 1972, and labels them made in the USA.

What is the difference between a 14 inch and a 20 inch throat on Van Mark brakes?

Throat depth sets how far into a sheet the brake can reach for a bend. The light-duty and TrimMaster brakes have a 14 inch throat, while the Metal Master 20 models reach 20 inches for wider pieces such as soffit.

Which Van Mark brake bends the heaviest steel?

The Industrial Metal Master 20 EZ. Van Mark rates it for 20 gauge galvanized steel and 24 gauge painted and stainless steel, compared with 29 gauge on the three lighter lines.

Will a TrimCutter or Multi Gauge fit older Van Mark brakes?

Van Mark says both fit current cam-locking brakes. For older models the company recommends calling its customer service line to confirm compatibility.

What warranty comes with Van Mark brakes?

Van Mark lists a one-year manufacturer's limited warranty from the date of original purchase.

Can I still get parts for older Van Mark brakes?

Van Mark offers tune-up kits for every brake it has built, with legacy kits for older Mark I and Trim-A-Brake models. Have your model and serial number ready when ordering.

Need help choosing the right Van Mark equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder