Werner range
Werner Extension Ladders in Aluminum and Fiberglass, Two and Three Section Models, Levelers and More
Duty ratings from Type II to Type IAA, nonconductive rails for electrical work, reach and setup angles, roof landings and utility pole hardware.
Werner extension ladders give roofers, painters, gutter installers, electricians and maintenance crews adjustable reach for exterior work, and the challenge is matching length, rating and rail material to the job before the ladder goes up. Nation Wide Ladder helps you make that match with over 50 years of supplying contractors, covering aluminum and fiberglass two-section models, three-section models, the Aerolite utility series and the levelers and stabilizers that go with them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Shop Werner Extension Ladders by Type
Werner Extension Ladders Product Lines
Werner D6200 Fiberglass Extension LaddersType IA fiberglass Werner D6200 extension ladders in two-section and three-section builds, 16 to 40 feet.
Werner D1200 / D1300 Aluminum Extension LaddersAluminum Werner D1200 and D1300 extension ladders rated Type II and Type I, in 16 to 40 foot…
Werner Aerolite B7100 Extension LaddersLighter Type IAA Werner Aerolite extension ladders, including CL leveler and B7100-2X cable hook models.
Werner D7100 Fiberglass Extension LaddersType IAA fiberglass Werner D7100 extension ladders from 16 to 40 feet, ready for V-rung and cable hooks.
Werner 16 ft Extension LaddersWerner 16 ft extension ladders compared, from the light D1216-2 to the D7116-2 and the compact three-section D6216-3.
Werner 20 ft Extension LaddersEight Werner 20 ft extension ladders compared, including the first D500-2 and AERO sizes and the three-section D6220-3.
Werner 24 ft Extension LaddersNine Werner 24 ft extension ladders compared, from aluminum Type II to fiberglass Type IAA, the three-section D6224-3…
Werner 28 ft Extension LaddersNine Werner 28 ft extension ladders compared on weight, rating and leveler options, including the AERO and the…
Werner 32 ft Extension LaddersNine Werner 32 ft extension ladders compared, the last size for the AERO and three-section lines.
Werner 36 ft Extension LaddersSix Werner 36 ft extension ladders compared on rating, rail material and weight, where the D500-2 and D7100-2…
Werner 40 ft Extension LaddersSix Werner 40 ft extension ladders compared on rating, weight and handling, the top size of most Werner…
Where Werner Extension Ladders Fit on Exterior Jobs
An extension ladder is not self-supporting, so it needs a wall, roof edge, pole or other structure to lean against. That makes it the standard tool for exterior work at height, from shingle and gutter jobs to siding, painting, sign work and building maintenance. Homeowners tend to need a lighter rating for seasonal tasks, while trades that climb with heavy tool belts every day are better served by Type IA and Type IAA models.
Most of the Werner models we carry are two-section designs, with a fly that slides up the base and locks onto its rungs through spring-loaded rung locks. On the Werner D1200-2, D1300-2, D1500-2, D500-2, D6200-2 and D7100-2, the base and fly also separate, so the base can serve alone as a straight ladder. Most of those series run from 16 to 40 feet, while the Werner D500-2 spans 20 to 48 feet.
Utility and telecom crews often set the ladder against a pole or a cable strand, which is why the Werner Aerolite B7100-2X comes with a cable hook and V-rung fitted for strands and poles up to 10 inches across.
Over 50 years of supplying homeowners and contractors means we can point a seasonal user and a daily roofer toward different Werner extension ladders without overselling either one.
Werner Extension Ladder Series Compared by Rail Material and Duty Rating
In aluminum, the Werner D1200-2 is rated Type II at 225 pounds, the D1300-2 is Type I at 250 pounds and the D1500-2 is Type IA at 300 pounds. The Werner D500-2 moves up to Type IAA at 375 pounds on most lengths, although its 36 to 48 foot models drop to 300 pounds. For very tall reach there is the three-section Werner 560-3, a 60 foot ladder rated Type I whose top fly lifts off to work as a straight ladder. Our Werner aluminum extension ladders range covers each of these in detail.
Fiberglass is the material to choose wherever electrical contact is possible. The Werner D6200-2 is rated Type IA at 300 pounds, and the D6200-3 three-section fiberglass extension ladder keeps that rating while adding height. The Werner D7100-2 is the heavy-duty option at Type IAA. The Aerolite B7100-2 fiberglass extension ladder carries the Type IAA rating while weighing about 25 percent less than comparable 375 pound ladders. Compare them in our Werner fiberglass extension ladders range.
Our team checks each spec against your work, so the rating, rail material and length on the quote suit the crew that will climb.
How Werner Extension Ladders Fit a Full Exterior Setup
An extension ladder is rarely the only piece of equipment on an exterior job. Siding and trim crews pair two ladders with jacks and a plank to stage along a wall, painters add standoff stabilizers to clear gutters, and roofers carry harnesses and anchors for the moment they step off at the eave. Long ladders also need a way to travel, so racks on the truck or van are part of the same decision. Choosing the ladder with the rest of the setup in mind keeps length, rating and hardware consistent across the crew, and it often points toward other manufacturers for the vehicle side of the job.
When the job calls for racks, staging or boxes as well, you can line up every manufacturer we carry in our ladder and truck equipment brands hub.
OSHA Load and Rung Rules Behind Werner Extension Ladders
The duty rating is the most the ladder is designed to carry, and OSHA defines that maximum intended load as everything on the ladder at once, including workers, tools and materials. OSHA also requires a portable ladder that is not self-supporting to withstand four times its maximum intended load when tested at a 75.5 degree angle, or 3.3 times for extra-heavy-duty Type IA metal or plastic ladders.
For electrical exposure, OSHA 1926.1053 calls for nonconductive side rails where the worker or the ladder could contact exposed energized equipment. Cal/OSHA adds that water makes a ladder conductive, so even wet fiberglass is unsafe for live electrical work.
OSHA spaces portable ladder rungs 10 to 14 inches apart on center, with at least 11.5 inches between the rails and slip-resistant metal rungs. Werner fits its aluminum extension ladders with 1.75 inch D-rungs, while the fiberglass D6200 and D7100 series use 1.63 inch D-rungs. On site, OSHA bars moving, shifting or extending a ladder while anyone is on it.
At our Windham and Worcester showrooms we can walk you through ratings and rail options in person before you commit to a size.
Sizing Werner Extension Ladders for Reach, Angle and Roof Access
Werner sizes an extension ladder by the combined length of its sections, but those sections overlap once extended, so the usable reach is shorter than the nominal size. Werner advises choosing by maximum reach height instead. Plan to stand no higher than the fourth rung from the top, and for roof access pick a length that lets the rails extend at least 3 feet past the roof edge, which OSHA requires at an upper landing. Where that is not possible, OSHA requires the top to be secured with a grab device provided.
For setup, Werner uses the four-to-one rule, placing the base one foot out from the wall for every four feet of height to the support point. OSHA expresses the same idea as a horizontal distance of roughly a quarter of the working length.
Sloped yards are common on exterior jobs, and OSHA allows a ladder only on a stable, level surface unless it is secured. Werner lists its PK80-2 leg levelers as fitting every length of the D6200, D7100, D1200, D1300 and D500 series.
Long Werner extension ladders still have to reach the site, and we install truck and van ladder racks as well as selling them.
Inspecting and Caring for Werner Extension Ladders Between Jobs
Check the rails, rungs, hardware, feet and locks on the ladder before each use, and remove any damaged ladder from service. Werner does not recommend repairing damaged ladders and does not offer a repair service. On a job site, OSHA also expects a competent person to inspect ladders periodically and after any event that could affect safe use, and it bars lashing two ladders together for extra length unless they were designed for it.
Safety labels must stay legible under OSHA rules, and Werner supplies replacements through its customer care team. A standoff stabilizer from our Werner ladder accessories range keeps the top of the ladder clear of gutters and window frames,. Werner sells replacement labels, foot assemblies, ropes, rope pulleys, locks and lock flippers for its extension ladders, so a frayed rope or sticky lock can be fixed, but it does not sell replacement sections, and a damaged rail or rung means a new ladder.
A crew that fails an inspection late in the week can still replace the ladder, since both of our locations open on Saturday mornings.
Why Crews Order Werner Extension Ladders Through Us
Compare lengths in our extension ladder category or return to the Werner brand overview, then send us your list. We quote Werner extension ladders by series, length and rating, and our own trucks deliver them door to door across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine.
Werner Extension Ladders FAQs
What is the difference between the Werner D6200-2 and D7100-2 extension ladders?
Both are fiberglass two-section Werner models. The D6200-2 is rated Type IA at 300 pounds, while the D7100-2 is rated Type IAA at 375 pounds.
How far should an extension ladder extend past a roof edge?
OSHA requires the side rails to extend at least 3 feet past the upper landing. If the ladder is too short for that, the top must be secured and a grab device provided.
Why is the reach of Werner extension ladders shorter than their size?
The size is the combined length of the sections, which overlap when extended. Werner recommends choosing by maximum reach height for that reason.
What is the highest rung I can stand on?
Werner sets the highest standing level on an extension ladder at the fourth rung from the top.
Who are the Werner Aerolite extension ladders designed for?
The Aerolite series is aimed at utility and telecom work, offering a Type IAA rating at roughly 25 percent less weight than comparable 375 pound ladders.
Which extension ladders do Werner PK80-2 levelers fit?
Werner lists its PK80-2 leg levelers as fitting every length of the D6200, D7100, D1200, D1300 and D500 series, and some Aerolite models ship with levelers installed.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.












