Werner Retractables & Lifelines

Werner Horizontal Lifelines for Two Workers, in Rope and Cable Kits, Strap or D-Bolt Ends, Stanchions and More

Temporary two-person spans from 30 to 100 feet, kernmantle rope versus steel cable, rope adjuster, ratchet and turnbuckle tensioning, built-in energy absorbers and qualified-person rules.

Werner horizontal lifelines solve the problem of staying tied off while moving along a beam, roof or deck, by stretching a line between two anchorages so up to two workers can travel the span without unclipping. Nation Wide Ladder helps crews size the span, anchors and connectors, and we supply Werner horizontal lifelines as complete temporary kits in kernmantle rope (30, 60 and 100 feet) and steel cable (30 and 60 feet), with cross-arm strap or D-bolt ends, rope adjuster, ratchet or turnbuckle tensioning, replacement cable assemblies and aluminum stanchions.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Who Needs Werner Horizontal Lifelines on the Job

OSHA describes a horizontal lifeline as a flexible line attached to anchorages at both ends and stretched between them, giving the rest of a fall arrest system a running connection point. That running connection is the reason to choose horizontal lifelines. A single anchor ties a worker to one spot and a retractable from it covers only an arc, while a horizontal line strung along the work lets the crew walk the full span and stay connected the whole way.

Typical users include ironworkers and steel erectors moving along a beam, roofers working a long eave, bridge and deck crews, and maintenance teams servicing equipment spread along a run of structure. Werner builds these horizontal lifelines as temporary kits, so they go up for a phase of work and come down again rather than staying on the building.

Each kit is set up for two users, who connect to the supplied O-rings with a self-retracting lifeline or a shock-absorbing lanyard, never a snap hook clipped straight onto the line, which Werner lists among the connections that can roll out. Werner notes that SRLs generally need less clearance than many other arrest systems, so crews close to a lower level can pair the line with our Werner SRLs range.

Our team walks through the span, the crew size and each connector with you, so the Werner horizontal lifelines you order fit the way your crew moves.

Werner Fall Protection L100030 30FT 2-Man Rope Horizontal Lifeline System, Cross-arm Strap, Rope Tensioner

Werner Horizontal Lifelines in Kernmantle Rope and Steel Cable

Werner rope kits use kernmantle synthetic line with a rope adjuster, tensioner and snap hook ends, and the whole system packs into a backpack. Two tensioning styles are offered. The L100 and L120 kits are tensioned with the included rope adjuster, while the L102 and L122 kits use a ratchet tensioner with a built-in tension limiter, such as the L102060 60 foot rope horizontal lifeline. Each comes in 30, 60 and 100 foot lengths.

Werner cable kits use steel cable fitted with a turnbuckle, fist grips, a tension indicator and snap hook ends, and the turnbuckle sets the tension. The L103 and L123 systems come in 30 and 60 foot lengths, and the L153 versions ship without anchors for use with anchorage chosen separately. When a cable is worn or damaged, the L163030 and L163060 replacement assemblies renew the line complete with turnbuckle and fist grips.

End fittings separate the horizontal kits further. Models numbered L100, L102 and L103 come with cross-arm straps, while L120, L122 and L123 come with D-bolt anchors. For cable lines that need to run above the workers, the Werner L400001 7.5 foot aluminum end stanchion raises the line overhead with a D-bolt anchor attached, and L400003 intermediate stanchions divide a long run into several spans, with a pass-through bracket that lets a worker move past without disconnecting.

Come to our Windham NH or Worcester MA showroom for a free consultation and compare rope and cable horizontal setups for your next job.

Werner Fall Protection L102060 60FT 2-Man Rope Horizontal Lifeline System, Cross-arm Strap, Ratchet Tensioner

Engineering Rules That Govern Every Two-Person Werner Horizontal System, from Qualified Persons to Anchor Loads

A line strung between two points behaves very differently from a single anchor. When a worker falls, the load pulls the line into a V and drives force sideways into both ends, and Werner warns that anchor forces can climb to as much as 15 times the arrest force. Span length, line tension and the number of people connected all change that figure. For that reason OSHA 1926.502 requires horizontal lifelines to be designed, installed and used under the supervision of a qualified person, as part of a complete personal fall arrest system that keeps a safety factor of two or more.

Werner horizontal lifelines are engineered as complete kits to meet that demand. An energy absorber is built into each system so anchor loads stay under 2,500 pounds, low enough for ordinary 5,000 pound anchors. Werner tests these products as complete systems and says their components are not interchangeable, so a rope, absorber or tensioner should never be swapped for a part from another kit or maker. Werner guidance is equally firm that only engineered systems belong on site, not makeshift rope tied between two points.

Tension and clearance are both read from the charts supplied with each system, and Werner notes that splitting a run into shorter spans with intermediate stanchions reduces the clearance a fall needs.

Over 50 years of supplying contractors means we know to ask who your qualified person is before we quote a horizontal system.

Werner Fall Protection L100060 60FT 2-Man Rope Horizontal Lifeline System, Cross-arm Strap, Rope Tensioner

Choosing Span, Anchors and Connectors for Werner Horizontal Lifelines

Measure the run first. Werner horizontal lifelines come in fixed lengths, so pick the kit that covers the distance between the two anchorage points, and where a run is long or the drop to the next level is short, a cable system with intermediate stanchions keeps each span shorter. Rope kits suit crews who move the line often, since the full system packs into a backpack, while the tension indicator on a cable kit gives a quick visual check that the line is set as the instructions require.

Next, confirm the anchorage. Cross-arm strap kits need a beam or column the strap can wrap, and D-bolt kits need a suitable connection point for the bolt anchor. Both ends must carry the loads stated in the Werner instructions, which the built-in absorber keeps within reach of ordinary 5,000 pound anchorage, such as our Werner fall protection anchors. Then decide how each worker connects and run the clearance chart for that connector.

OSHA requires every part of a personal fall arrest system to be inspected before each use, with defective components removed from service. On horizontal lifelines that means the rope or cable, the absorber, the tensioner, the end hardware and the O-rings.

Our own trucks deliver door to door across New England and we ship anywhere in the US, so horizontal kits reach the site that needs them.

Werner Fall Protection L100100 100FT 2-Man Rope Horizontal Lifeline System, Cross-arm Strap, Rope Tensioner

Werner Horizontal Kits Inside a Complete Fall Protection Plan

A horizontal line is only the middle of the system. Harnesses, retractables or lanyards and the anchors at each end all have to suit it, and the same crew usually needs ladders and truck storage to get the gear onto the structure in the first place. Related gear follows the same inspection routine in our Werner lifelines and retractables overview.

For the wider kit, you will find each maker we supply in our ladder and truck equipment brands hub.

Werner Fall Protection L102030 30FT 2-Man Rope Horizontal Lifeline System, Cross-arm Strap, Ratchet Tensioner

Quotes on Werner Horizontal Lifelines by Span and Anchor

Rope or cable spans from 30 to 100 feet, a built-in absorber that keeps anchor loads under 2,500 pounds and a choice of strap or D-bolt ends give two-person crews a running connection that suits the structure. Send us the span length, anchor type and number of workers, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner horizontal lifelines with the right end fittings and tensioner. Browse the kits in our rope grab and lifeline store category or head back to the Werner overview.

Werner Horizontal Lifelines FAQs

How many workers can use Werner horizontal lifelines?

Two. Each Werner kit is designed for up to two users, who connect to the supplied O-rings with an SRL or a shock-absorbing lanyard.

Who has to set up horizontal lifelines?

OSHA 1926.502 requires horizontal lifelines to be designed, installed and used under the supervision of a qualified person, with a minimum safety factor of two.

What anchors do Werner horizontal lifelines need?

Werner builds an energy absorber into each system so the load reaching each anchor stays under 2,500 pounds, within the capacity of ordinary 5,000 pound anchors.

What separates the Werner rope adjuster and ratchet tensioner kits?

Rope adjuster kits are tightened with the included rope adjuster. Ratchet kits add a ratchet tensioner with a built-in tension limiter.

Which Werner horizontal lifelines come in 100 foot lengths?

The kernmantle rope kits, which come in 30, 60 and 100 foot lengths. Werner cable kits come in 30 and 60 foot lengths.

Can Werner horizontal lifelines run above the workers?

Yes, on cable lines. The Werner L400001 7.5 foot aluminum end stanchion raises the line overhead, and L400003 intermediate stanchions split a long run into shorter spans.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder