Werner Retractables & Lifelines
Werner 7 ft SRLs for Overhead Tie-Off, in Aluminum Baseline Singles, Twin Legs, XAC and AutoCoil 2 Models and More
What one extra foot of web changes over a 6 foot unit, why every 7 foot model anchors overhead, and how hooks, twin leg adaptors and the 900 pound XAC rating compare.
With Werner 7 ft SRLs you get one more foot of line than a 6 foot Bantam inside a tougher aluminum housing, which helps crews who knock their gear around but still tie off overhead. Nation Wide Ladder helps you sort the 7 ft range, from Baseline singles with snap, aluminum rebar or steel rebar hooks and the R530007XAC to the R531007 twin legs and the older AutoCoil 2 dual leg units, checking anchor height and hook before you order.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What the Extra Foot of Line Gives You at 7 ft on Werner Units
Moving from a 6 foot unit to a 7 ft one widens the circle you can cover around a single anchor, which matters to a tech working around a machine or a framer moving along a wall line. Werner builds its 7 ft range around the Baseline family, whose aluminum housing with a swivel top shields the brake inside, and Werner lists the R530007 at 3.5 pounds against 2.5 for the 6 foot Bantam web unit. That housing adds a little weight, and in return the braking parts get more protection on a rough site.
That extra foot also has a limit. Werner says to step up to a longer retractable when you need more reach, and never to clip a lanyard onto one, so if 7 feet falls short the 11 foot Baseline is the next size in the same housing. We point crews toward Werner 7 ft SRLs when they want a durable personal unit and their work stays near the anchor.
Every 7 ft model in our listings is a Class 1 device for anchorage at or above the back D-ring. None carry the Class 2 marking, so foot-level tie-off calls for an LE unit from elsewhere in our Werner self-retracting lifelines range.
Over 50 years of supplying contractors has taught us to ask where the anchor sits and how rough the site is before we suggest a 7 ft unit.
Baseline Singles, Twin Legs, XAC and AutoCoil 2 Werner 7 ft Models
The single Baseline units come with three hooks. The R530007 7 ft Baseline uses a snap hook, the R530007-R an aluminum rebar hook and the R530007-SR a steel rebar hook, each on UHMWPE and polyester webbing with a carabiner included. The R530007XAC is the version where Werner publishes a 900 pound maximum arresting force, and more detail on each sits on our Werner Baseline SRLs page.
Twin legs keep one line clipped while the other moves. The R531007 Baseline twin leg ships with a twin leg carabiner adaptor, Werner lists it at 6 pounds, and the R531007-R and R531007-SR add the rebar hooks. That setup suits a worker moving between anchor points along a run of steel or racking.
Two AutoCoil 2 units also sit at this length, the R231007 dual leg web unit and the R231007-R. Werner now lists the R531007 as the replacement for the R231007, so we confirm availability on either AutoCoil 2 unit and can quote the Baseline twin leg instead. Our listings do not say what the -R suffix changes on the R231007-R.
Replacement 7 ft units for Maine crews can ride our regular weekly delivery run from New Hampshire.
Overhead Anchoring and Arrest Distance on Werner 7 ft SRLs
Because these SRLs are Class 1 units, the anchor goes at or above the back D-ring. Anchored that way, Werner lists a 24 inch maximum arrest distance across the Baseline 7 ft singles, and ANSI Z359.14-2021 allows a Class 1 device up to 42 inches, so the published figure sits well inside the standard.
Read the label on twin legs. Werner product data gives the R531007 a 24 inch maximum arrest distance in its feature list, yet its description says under 36 inches, so plan clearance from the label and user instructions on the unit you actually hang. The older AutoCoil 2 units carry a Class A rating from the 2014 edition of the standard rather than Class 1.
Clearance under the work with any of these SRLs starts from the arrest distance, and the Werner user instructions for each unit set out what else to allow, including swing if you work off to the side of the anchor. Werner also engraves the serial number and date of manufacture on each Baseline housing, which keeps the yearly competent-person inspection tied to the right unit.
Both of our locations open on Saturday mornings, so a foreman can compare 7 ft hooks and twin leg setups without losing a weekday on site.
Werner 7 ft Units Within an Overhead Anchor Plan
Overhead-only gear puts the anchor at the center of the plan. Someone has to reach the beam or anchor point first, usually from a ladder or lift, and the harness, connectors and access equipment often come from more than one manufacturer. On a framing or maintenance job, that usually means a ladder to the anchor before anyone clips on.
You can review the other makers behind that access equipment in our ladder and truck equipment brands hub.
Ordering Werner 7 ft SRLs for Overhead Crews
Aluminum housings, three hook styles, a twin leg with its adaptor and a published 24 inch overhead arrest distance make this a practical length for durable personal tie-off. Send us the hooks, leg counts and anchor setup you need, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner 7 ft SRLs to fit. See the lineup in our Werner store or step back to the Werner overview.
Werner 7 Ft SRLs FAQs
Which Werner 7 ft SRLs do you list?
Baseline singles R530007, R530007-R, R530007-SR and R530007XAC, the R531007 twin legs with snap or rebar hooks, and the AutoCoil 2 R231007 and R231007-R.
Can Werner 7 ft SRLs be anchored at foot level?
No. Every 7 ft model we list is a Class 1 unit for anchorage at or above the back D-ring. Foot-level work needs a Class 2 leading edge unit.
What does XAC mean on the 7 ft Baseline?
On the R530007XAC, Werner publishes a 900 pound maximum arresting force alongside the 24 inch maximum arrest distance.
Are the AutoCoil 2 SRLs at 7 feet still made?
Werner lists the Baseline R531007 as the replacement for the R231007, so we confirm availability and can quote the Baseline twin leg instead.
What if 7 feet of line does not reach the work?
Werner says never to add a lanyard to an SRL. Move up to a longer unit, such as the 11 foot Baseline in the same aluminum housing.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.









