Werner Retractables & Lifelines

Werner Rope Grabs, Manual and Self-Trailing Stainless and Steel Grabs for 5/8 Inch Lifelines, Lanyards and More

Devices that ride a vertical rope lifeline, compared on manual versus self-trailing action, stainless or steel bodies, attached energy absorbers, strength and the line they are made to fit.

Werner rope grabs are the working part of a vertical rope system, moving up and down the lifeline with the climber to give continuous fall protection from a single overhead anchor. Nation Wide Ladder helps you choose among five Werner grabs for 5/8 inch rope, the manual L240000 and L240001 in stainless steel, the self-trailing L240002 stainless grab with an 18 inch shock pack, and the steel self-trailing L250000 and L250001.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

How Werner Rope Grabs Work on a Vertical Lifeline

A grab lets a climber stay connected to a vertical line while moving up or down it, so the anchor stays put at the top. We see Werner rope grabs used by roofers working down a pitch, crews on towers and structures, and anyone tied to a single overhead anchor who needs to travel. A climber on a ladder against a pole, a roofer moving down a pitch and a crew descending a structure all use the same rope and grab principle.

Werner builds two kinds. A self-trailing grab follows the worker without any help from the user, which suits continuous climbing. A manual grab can be attached or removed anywhere on the line and fixed in one spot, which suits positioning or restraint work where the worker wants to stay at a set height.

Werner pairs each rope grab with a vertical rope lifeline anchored overhead, and OSHA requires a separate vertical lifeline for each worker, apart from a narrow exception during elevator shaft construction, so every climber needs a grab and a rope of their own.

Werner makes each of these devices for 5/8 inch rope lifelines, matching the Werner Poly-Dac vertical lifelines in our Werner retractables and lifelines range.

We match each grab to the line and the way your crew climbs, so the Werner rope grabs on your quote suit the work.

Werner Fall Protection L240000 Stainless Steel Trailing Rope Grab

Five Werner Grabs Compared by Body, Action and Attached Lanyard

The stainless steel models carry L240 numbers. The L240000 stainless grab is the manual Werner design on its own, with a 2.16 inch ring and a weight of about 1.4 pounds, and the L240001 adds an attached 3 foot shock-absorbing lanyard for fall arrest. The L240002 self-trailing grab switches to a self-trailing stainless design with an 18 inch shock pack attached.

The steel L250 models are both self-trailing. The L250000 is the bare Werner grab, also with a 2.16 inch ring, and the L250001 steel grab adds an integral 3 foot shock-absorbing lanyard in 1 inch webbing, at about 3 pounds in all. Werner lists the stainless L240002 at about 2.9 pounds with its shock pack, against about 1.4 pounds for the bare manual L240000.

In practice, the choice comes down to stainless or steel, manual or self-trailing, and whether the grab arrives with its energy absorber attached. A grab bought without one needs a shock-absorbing lanyard between it and the harness for fall arrest, since Werner rules out non-shock-absorbing lanyards in fall arrest.

At our Windham NH and Worcester MA showrooms you can compare a manual and a self-trailing grab in hand before deciding.

Werner Fall Protection L240001 Stainless Steel Trailing Rope Grab W/ Shock Absorbing Lanyard

Strength Ratings, Line Fit and Inspection for Werner Rope Grabs

Werner rates each of these grabs at a minimum breaking strength of 3,600 pounds. The rest of the system has its own OSHA floors, with vertical lifelines needing a 5,000 pound minimum breaking strength and the anchorage needing to carry 5,000 pounds per attached worker unless a qualified person designs it with a safety factor of two.

Line fit is not something to improvise. Werner lists these models for 5/8 inch rope lifelines and warns that components from other makers may not be interchangeable, so run them on a matching 5/8 inch Werner line rather than whatever rope is on the truck.

Check the grab before every use for damage and free movement on the line, alongside the rope and snap hooks, and have a competent person other than the user inspect it at least once a year. Any grab that has arrested a fall comes out of service until a competent person confirms it is undamaged. Werner publishes user instructions for these grabs, and the rope, the grab and any lanyard should all be checked against them before the first climb.

Replacement grabs can travel with the rest of an order on our own trucks across New England, and we ship anywhere in the US.

Werner Fall Protection L240002 Stainless Steel Self Trailing Rope Grab With Shock Pack

Werner Rope Grabs Inside a Complete Climbing Setup

A grab sits between the line and the harness, so its performance depends on an anchor at the top that can take the load and a safe way up to set it. Ladders, roof brackets and staging often come from other makers, and planning them with the tie-off keeps the climb in step.

If you want to compare those makers side by side, try our ladder and truck equipment brands hub.

Werner Fall Protection L250000 Steel Trailing Rope Grab

Quotes on Werner Rope Grabs and Matching Lines

Manual and self-trailing designs, stainless and steel bodies and attached lanyards or shock packs give each climber a grab that suits the job. Tell us the line, the climb and how your crew works, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner rope grabs with lines to match. Browse our Werner store or return to the Werner brand page.

Werner Rope Grabs FAQs

What size line do Werner rope grabs fit?

5/8 inch rope lifelines, such as Werner Poly-Dac lines.

What is the difference between manual and self-trailing grabs?

A self-trailing grab follows the worker up and down the line without help, while a manual grab can be fixed at one point for positioning or restraint.

Which Werner grabs come with a shock absorber?

The L240001 and L250001 come with a 3 foot shock-absorbing lanyard, and the L240002 has an 18 inch shock pack attached.

How strong are Werner rope grabs?

Werner lists a minimum breaking strength of 3,600 pounds for each of the five models.

Can I use Werner grabs on another brand of line?

Werner warns that components from different makers may not be interchangeable, so use a 5/8 inch Werner rope lifeline listed for the grab.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder