Best Sellers

Van Upfitting With Shelving Packages, Partitions, Ladder Racks, Conduit Carriers, Drawer Units and More

Interior shelving and bulkheads, roof racks and pipe tubes, drawer units and trade holders from Holman, Weather Guard, Vantech and System One, planned around the make, wheelbase and roof height of each van.

When you plan van upfitting for a new cargo van, the shelving, partition, roof rack and pipe tube all have to suit the same make, wheelbase and roof height, and Nation Wide Ladder plans, quotes and installs the whole setup from the makers contractors order most. We cover van shelving packages from Holman and Weather Guard, mesh, window, steel and composite partitions, drop-down and fixed ladder racks from Weather Guard, Vantech, Holman and System One, aluminum and PVC conduit carriers, and the drawer units and trade holders that finish a van upfitting job.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Van Upfitting Inside the Cargo Area, From Shelving Packages to Partitions

Most van upfitting starts inside, because the shelving layout and the wall behind the seats decide where every tool lives. Holman builds its interiors as packages for one named van, wheelbase and roof height, running from Base and Quick Package starters through layouts aimed at plumbers, electricians, HVAC techs, telecom installers, locksmiths and security crews, with folding shelves for parcel routes. Weather Guard sells shelf units on their own, in 44 and 60 inch heights and 36 to 60 inch lengths, and pairs shelving with a bulkhead in its van packages. Our van shelving page weighs the packaged route against the modular one, van by van and trade by trade.

The partition is the other half of an interior van upfitting. Weather Guard counts a bulkhead as part of its standard upfit next to shelving, and Holman classes its partitions as safety gear, not just a divider, so most packages from both makers include one. Compact vans such as the Transit Connect and NV200 often take a mesh or window partition, while full-size vans choose between steel and composite bulkheads, all set out on our van partitions page.

Our team helps you select the shelving and partition for your van and trade, checking each package against the make, wheelbase and roof height before anything is ordered.

Holman FOLDING SHELVES PACKAGE – NV STANDARD ROOF

Van Upfitting on the Roof With Ladder Racks and Conduit Carriers

Roof equipment is where a van upfitting saves the most climbing. On a Weather Guard EZGLIDE2, for example, the ladder swings down along the side of the van and a slide stage drops it 2 ft more, while fixed designs like the Vantech H1 and the System One I.T.S. Contractor rack hold ladders and long material on crossbars, secured by straps or winches. Holman builds both kinds, from Clamp & Lock and drop down mechanisms to crossbar and Pro III cargo designs. We compare drop-down, clamping and platform designs across every maker on our van ladder racks page.

Pipe and conduit travel better in a closed tube than across open crossbars, so electricians and plumbers add a carrier to the rack. K&W lists an 8 by 8 by 126 inch aluminum box, Weather Guard an 11 inch wide carrier 121 inches long, and Vantech a 6 inch tube 128 inches long with dividers, while Holman and System One sell kits that turn PVC pipe into a carrier. Sizes and mounting sit side by side on our conduit carriers page.

We don’t just sell, we install, so racks, mount kits and carriers go onto your van roof square and ready for the first load.

Holman ELECTRICAL CONTRACTOR 46″ H SHELVES – TRANSIT 130″ WB LOW ROOF

Planning a Van Upfitting Order by Make, Wheelbase, Roof Height and Payload

Every part of a van upfitting is tied to the vehicle. Holman packages and Weather Guard kits are listed by make, wheelbase and roof height, so a layout for a 130 inch low roof Transit will not drop into a 148 inch high roof model, and roof racks follow the same pattern through their mounts. Weather Guard sells channel mounting kits matched to each van, Vantech uses factory roof points, rain gutter clamps or a drilled universal mount, and Holman lists many of its racks with a vehicle-specific mount kit sold separately.

Weight is the second check. Vantech rates each mount at 125 lbs, System One rates its van Contractor Rig at 800 lb and its two-truss Utility Rig at 400 lb, and Weather Guard warns that a rack able to carry a 40 ft ladder may sit on a van that cannot. Shelving, stock, drawers and the roof load all come out of one payload, which is why we plan the interior and the roof of a van upfitting as a single list rather than two separate orders, with lighter aluminum racks and shelves leaving more of that payload for tools.

Send us the year, make, wheelbase and roof height with your trade, and we quote the full van upfitting, or call our New Hampshire line at 603-434-6911 or our Massachusetts line at 508-754-3030.

Holman BASE 60″ H SHELVES – TRANSIT 130″ WB HIGH ROOF

Drawers, Cabinets and Trade Holders That Finish Van Upfitting Work

Shelves alone leave fittings, gas cylinders and invoices with nowhere sensible to go. Weather Guard rounds out its van line with the ITEMIZER aluminum drawer unit, 2 and 4 drawer cabinets, an 18-bin parts cabinet, locking shelf doors and plastic bins in five sizes. Trade holders go further, with refrigerant tank racks for HVAC vans, a wire spool holder for electricians and a Cab Command Center for the front seat, 13 inches wide for Chevy, GM and Sprinter vans or 7.5 inches for Transit and ProMaster vans. Our Weather Guard van accessories range lists each piece with its sizes.

Holman packages build some of this in. The Pro tier of the Quick Package brings a pair of drawer units, J-hooks, dividers and a shelf door kit, and the Max tier layers on parts bins, two locking shelf drawers and a partition door that locks. Heavy pieces such as drawer units belong low and close to the floor, and the tools you reach for at every stop belong near the side or rear doors, so the order of a van upfitting matters as much as its parts list.

Free consultations at our showrooms in Windham, NH and Worcester, MA let you look at drawer units and shelving side by side before settling a layout.

Holman COMMERCIAL 43″ H SHELVES WIRE PARTITION – PROMASTER CITY

Mixing Makers Within One Van Upfitting Plan

Few working vans carry parts from a single maker. In a van upfitting, interior and roof equipment meet only at the van body, so a fleet can settle on one maker for shelving and another for racks after comparing ratings, mounts and finishes, and many do. The Holman truck and van equipment line alone spans shelving packages, van racks and truck racks, while Weather Guard, Vantech and System One each bring their own roof systems.

To weigh every maker for each part of the van, start from our truck, van and ladder brands hub.

Holman FOLDING SHELVES PACKAGE – NV HIGH ROOF

Van Upfitting Quotes, Installation and Delivery From Our Team

Nation Wide Ladder brings over 50 years of outfitting contractors’ vehicles to van upfitting, quoting the shelving, partition, roof rack and accessories as one plan and installing them so every piece suits the van. Deliveries go out on our own trucks to Maine, Vermont, New Hampshire, Massachusetts, Rhode Island and Connecticut, door to door, orders ship anywhere in the US, and the wider best-selling equipment range covers ladders, truck gear and job site access.

Van Upfitting FAQs

What does van upfitting usually include?

Most van upfitting jobs cover interior shelving and a partition behind the seats, then a roof rack for ladders, a conduit carrier for pipe, and drawers or trade holders for small parts.

Which makers do you use for van upfitting?

Holman and Weather Guard for shelving and partitions, Weather Guard, Vantech, Holman, System One, Prime Design and Gentili for roof racks, and K&W, Weather Guard, Vantech, Holman and System One for conduit carriers.

Does van upfitting depend on roof height and wheelbase?

Yes. Shelving packages and many rack mounts are listed for one make, wheelbase and roof height, so we confirm all three before quoting.

Should the interior or the roof come first in a van upfitting plan?

Plan both together. Shelving, stock and the roof load share one payload, and the rack you choose can depend on what rides inside.

Can I add to a van upfitting later?

Yes. Holman Quick Package Go is built to be expanded with accessories, and Weather Guard drawers, bins and folding shelves can join the layout after the van starts working.

Do you install van upfitting equipment?

Yes. We install shelving, partitions, roof racks and accessories, and our own trucks deliver across New England.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder