Werner Retractables & Lifelines
Werner Leading Edge SRLs for Deck, Precast and Steel, in Bantam Web, Cable, Tie-Back and Max Patrol Models and More
Class 2 retractables tested on B-deck, precast concrete and steel beam, with foot-level anchoring, web versus cable lines, rebar and form hooks, and clearance planning.
Werner leading edge SRLs solve the problem of tying off at or under the back D-ring, where a falling worker's line is dragged across the lip of a deck, beam or slab. Nation Wide Ladder helps deck, precast and steel crews match hooks, lengths and anchors to that work, and we supply Class 2 Werner leading edge SRLs as Bantam web, Bantam cable, Bantam tie-back and twin leg units plus Max Patrol cable units up to 65 feet, each approved by Werner for steel beam, precast concrete and B-deck.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why Deck Crews Need Werner Leading Edge SRLs
OSHA defines a leading edge as the open side of a floor, roof or formwork that keeps changing location as new decking, roof or form sections are placed. Anyone constructing at a leading edge 6 feet or more above a lower level must be protected by guardrails, safety nets or a personal fall arrest system, and on an open deck the arrest system is usually the workable answer. Anchorage is the difficulty. With nothing overhead, the anchor often ends up at the worker’s feet, so in a fall the line runs over the lip and takes the load across it.
Ordinary retractables are not built for that. The Werner fall protection FAQ states that only SRLs and shock-absorbing lanyards tested over an edge may be used in leading edge applications, and approved units are marked for it. Werner leading edge SRLs carry the yellow Class 2 marking, which tells the crew the device has passed foot-level testing in addition to the overhead tests a Class 1 unit faces.
Metal deck installers, precast erectors, concrete form crews and ironworkers walking steel are the core users. Werner also notes that some companies now standardize on Class 2 units across the workforce, so one type of Werner retractable covers overhead and foot-level tie-off and nobody grabs the wrong unit.
Bring your deck layout to a free consultation at our Windham NH or Worcester MA showroom and we will talk through leading edge tie-off with you.
Werner Leading Edge SRLs in Web and Galvanized Cable, from the Short Bantam Up to the 65 Foot Max Patrol
Werner Bantam LE web units, starting with the R430006LE, carry 6 feet of a Kevlar and UHMWPE webbing blend in a thermoplastic housing. Werner offers them with a snap hook, an aluminum rebar hook on the R430006LE-R or steel form hooks on the -SF and -SR versions, and as twin leg assemblies in the R433006LE family. The tie-back R430006LE-TB and R433006LE-TB lengthen the web to 9 feet and use a hook that wraps a member and connects back to the web, forming an anchor without a separate strap, at just over 4 pounds per unit.
Werner cable Bantams trade web for an 8 foot line of 3/16 inch galvanized steel cable. The R410008LE has a snap hook, the -R and -SR versions add rebar or steel form hooks, and the R413008LE twin leg models pair two units. Every Bantam LE attaches through a steel harness web connector and includes a compact backpack style energy absorber.
For a wider work zone, Werner Max Patrol LE units carry 3/16 inch galvanized cable in 20, 30, 50 and 65 foot lengths, with a polyester shock pack, a polymer housing and a carry handle. The R410030LE 30 foot Max Patrol leading edge SRL sits in the middle of that range for crews spread along a bay.
We run regular weekly deliveries from New Hampshire to Maine, so Werner leading edge SRLs for a Maine deck crew travel on a set route.
Class 2 Ratings and Werner Leading Edge Testing on B-Deck, Precast and Steel
ANSI Z359.14-2021 requires a Class 2 retractable to pass every Class 1 test plus a drop with the anchor at foot level, using a 310 pound test weight. For Class 2 units, the arrest distance must be printed on the label and in the instructions, so read both before working out clearance for a setup rather than assuming the overhead figure applies.
Werner goes further than the minimum on the surfaces tested. The 2014 edition of the standard only required drop tests over sharp structural steel, which left concrete, stone and steel decking outside its scope, so Werner leading edge SRLs are tested over B-deck, precast concrete and steel beam, the three surfaces most deck and precast crews tie off across.
With overhead anchorage, Werner lists a 24 inch maximum arrest distance for the Bantam LE units and the 20 and 30 foot Max Patrol LE, rising to 32 inches on the 50 and 65 foot Max Patrol LE. OSHA requires every lifeline to be protected against cutting or abrasion, and an edge-tested line is how a foot-level system meets that rule when the deck itself is the hazard. Units built to the 2014 edition remain usable, Werner adds, while they pass inspection and stay within their service life.
Our team reads the label data with you and checks each Werner leading edge model against the clearance on your site before you order.
Setting Up Foot-Level Tie-Off with Werner Leading Edge SRLs
Start with the anchor. OSHA calls for anchorage that supports 5,000 pounds per attached worker, or a system designed with a safety factor of two under a qualified person. Then work out clearance with the Werner charts, which let a crew plot its application without doing the math on the deck. Werner stresses that anchor position changes the result, since overhead tie-off and tie-off under the D-ring behave differently, and its chart examples include anchors set back from the leading edge and offset to one side.
Hook choice should match the structure. Rebar hooks clip around reinforcing steel, steel form hooks suit form work, and tie-back models create their own anchor around a member. In aerial lifts Werner notes that Class 2 units are often preferred, because boom and articulating lifts bounce in a way scissor lifts do not and the basket anchor is rarely overhead.
Inspect each unit before use and remove it from service once it has arrested a fall, if its load indicator shows, or if the line is worn or kinked. Werner treats a rescue plan as a requirement, so settle how a suspended worker will be reached before deck work at leading edges starts. Compatible harnesses, anchors and lanyards sit in our Werner retractables and lifelines collection.
Over 50 years of supplying contractors has taught us to ask about rescue and anchor position up front, and we do on every leading edge quote.
Werner Leading Edge Retractables Beside the Rest of the Deck Crew Kit
Work at leading edges rarely runs on a single product. Deck and precast crews also lean on harnesses, anchors, ladders to reach the deck and storage on the truck, often from different makers, and planning that kit together keeps the tie-off plan and the access plan in step. Overhead units for the same crew sit among our Class 1 Werner SRLs.
If you are pricing more than one maker for the job, see them all in our ladder and truck equipment brands hub.
Quotes on Werner Leading Edge SRLs for Deck and Precast Crews
Edge-tested lines, Class 2 marking and models from 6 to 65 feet give crews working at leading edges a clear path from anchor to clearance. Tell us the deck material, anchor position and reach, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner leading edge SRLs for your deck, precast or steel crew. See every model in our lifeline and retractable catalog or return to the Werner brand page.
Werner Leading Edge SRLs FAQs
Can I use regular SRLs at a leading edge?
No. Werner permits only SRLs and shock-absorbing lanyards that have been tested over an edge and are marked as approved for leading edge use.
Which surfaces are Werner leading edge SRLs approved for?
Werner tests and approves them on B-deck, precast concrete and steel beam.
What is the arrest distance of a Werner Max Patrol leading edge unit?
With overhead anchorage, Werner lists 24 inches for the 20 and 30 foot models and 32 inches for the 50 and 65 foot models. Foot-level figures are printed on each unit's label and in its instructions.
How can I tell Werner leading edge SRLs from Class 1 units?
Werner marks Class 2 leading edge units in yellow and Class 1 overhead units in blue.
Which Werner leading edge model creates its own anchor?
The tie-back R430006LE-TB and R433006LE-TB, whose 9 foot web wraps a structural member and connects back to itself.
Are Werner leading edge SRLs a good fit for aerial lifts?
Werner notes that Class 2 units are often preferred in boom and articulating lifts, which bounce more than scissor lifts and rarely offer an overhead anchor.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.










