Best Sellers

Siding Brakes With 14 to 20 Inch Throats, Trim, Pro and Industrial Grades, Cutters, Coil Holders, Stands and More

Throat depth, hinge and hem, published bending limits for aluminum, vinyl, steel and copper, lengths and weights, and the cutters, coil holders, stands and legs that build a siding trim station.

Siding brakes let a crew bend window wraps, fascia covers, corner trim and flashing at the house in the exact color and profile the job needs, and Nation Wide Ladder matches the Van Mark and Alum-A-Pole models siding installers order most to the metal and coil you bend. Our best sellers cover the light-duty Mark I, the TrimMaster, the Metal Master 20 and Industrial Metal Master 20 EZ, the Alum-A-Brake Ultima QMS, and the cutters, gauges, coil holders, stands, legs and wheel kits that turn a brake into a trim station.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Siding Brakes by Throat Depth, Hinge and Hem

Throat depth sets how far into a sheet a brake can reach, and it is the first spec to compare across siding brakes. The Van Mark light-duty Mark I and pro-grade Van Mark TrimMaster both have a 14 inch throat, comfortably wider than the roughly 8 inch trim piece Van Mark calls typical on a house. The Metal Master 20 and Industrial Metal Master 20 EZ reach 20 inches for soffit and broad fascia, and the Alum-A-Pole Ultima Q series sits close behind at 19.5 inches.

Hinge design shapes the hem. The Mark I uses a traditional hinge that sets a 3/4 inch hem, suited to fascia over one-by lumber, while the POWERslot hinge on the TrimMaster sets a 5/8 inch hem for the tighter pocket used with vinyl siding and fiber cement. Every Van Mark line is a cam-locking design with a Power Lock bar whose 150 degree bending radius makes 180 degree hems easier. Alum-A-Pole holds stock with snap clamping and fits a replaceable hardened stainless steel jaw edge and a replaceable PVC hinge strip, so worn edges on these siding brakes can be renewed.

Bring a sample of your siding coil to our Windham, NH or Worcester, MA showroom, where a free consultation lets you check it against each throat and hinge.

Van Mark 3001 – Trim-A-Table legs

Bending Capacity, Length and Weight Across Van Mark and Alum-A-Pole Siding Brakes

Published limits decide which metal each of these siding brakes can handle. Van Mark rates the Mark I and Metal Master 20 for aluminum up to 0.027 inch and the TrimMaster to 0.032 inch, with all three bending 29 gauge galvanized, painted and stainless steel and 24 ounce soft copper. The Industrial Metal Master 20 EZ steps up to 0.050 inch aluminum, 20 gauge galvanized steel, 24 gauge painted and stainless steel and 36 ounce copper, which is why metal roofers forming valley pans and ridge caps choose it. Alum-A-Pole rates every Ultima build for 0.024 inch aluminum coil, 0.035 inch vinyl coil, 28 gauge soft steel and 16 ounce copper.

Length and weight travel together. Van Mark’s lighter brakes run from 2 ft to 12 ft 6 in and the industrial model from 6 ft 6 in to 14 ft 6 in, and at 10 ft 6 in a TrimMaster weighs 123 pounds, a Metal Master 148 and the Industrial Metal Master 259. The Alum-A-Pole APBRAKE-QMS comes in 5 ft 11 in, 7 ft 10 in and 10 ft 6 in lengths at 93, 124 and 162 pounds. Both makers build their siding brakes in the USA.

Our team helps you select the siding brake that suits your metal and the truck or van that has to carry it, checking capacities before we quote.

Van Mark TAT60 – Trim-A-Table

Cutters, Coil Holders and Stands That Turn Siding Brakes Into Trim Stations

Accessories cut setup time on a siding job. On cam-lock Van Mark brakes, the TrimCutter 3017 and Multi Gauge ride AccuTrack rails on the Power Lock bar, so a crew cuts and measures without moving the stock, and the TrimCutter handles painted steel up to 24 gauge. The CD24 Coil Dispenser stands free on non-marring rollers with a tension roller that keeps coil from unraveling, UniStand stands come in versions for 14 and 20 inch throats, and the Trim-A-Table TAT60 adds a 6 ft saw track. Tune-up kits such as 3157 for the TrimMaster bundle the vinyl strips, wedges, pull pins and springs that wear.

Alum-A-Pole builds cutting and measuring into the QMS for siding crews who cut every piece on site, with a track-mounted Quick Cutter, two measuring arms, four Maximizers and a removable table. Its APCH coil holder carries a built-in slitter for 24 by 50 inch rolls, the APLEG legs fit any Q series brake or coil holder without tools, and the APWH wheel kit detaches in seconds and handles grass.

Send us the brake model and the accessories you want, and we quote the full siding trim station together, or call 603-434-6911 or 508-754-3030.

Alum-A-Pole APCH – Coil Holder

Siding Brakes Next to Staging, Ladders and Truck Racks

A brake is one station on a siding job. Siding crews stage the wall on pump jack scaffolding or ladders, bend trim on the ground nearby, and carry coil and a brake up to 14 ft 6 in long on a truck or van rack, so brake length has to fit the vehicle too. Our Van Mark siding brakes and Alum-A-Pole siding brakes pages cover each model, and the Van Mark brand page traces that maker’s full range.

For the staging, ladder and rack makers that complete an exterior setup, compare every brand in our ladder and truck equipment brands hub.

Van Mark TM series – Mark II TrimMaster®

Siding Brakes Quoted With Their Stands and Cutters

Nation Wide Ladder has served homeowners and contractors for over 50 years, and we quote siding brakes with the stands, cutters and coil holders that suit them as part of our best-selling ladder and siding equipment. Our own trucks deliver door to door across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine, with weekly runs into Maine, so even a 14 ft 6 in brake arrives ready to set up.

Siding Brakes FAQs

Which siding brakes do installers order most?

The 14 inch Van Mark TrimMaster and Mark I for aluminum trim coil on siding work, the Alum-A-Pole Ultima QMS for crews who want cutting and measuring built in, and the Industrial Metal Master 20 EZ for metal roofing.

What throat depth do siding brakes need for trim?

A 14 inch throat covers typical trim pieces, which Van Mark puts at about 8 inches wide. A 20 inch throat reaches wider soffit and fascia.

Which siding brakes bend painted steel for roofing?

The Van Mark Industrial Metal Master 20 EZ, rated for 24 gauge painted and stainless steel and 20 gauge galvanized steel.

Can siding brakes bend vinyl coil?

Alum-A-Pole rates its Ultima Q series for 0.035 inch vinyl coil, as well as 0.024 inch aluminum coil, 28 gauge soft steel and 16 ounce copper.

Do siding brakes come with a stand?

The Industrial Metal Master 20 EZ ships with the Master Stand EZ. Other Van Mark brakes use UniStand stands sold separately, and Alum-A-Pole offers APLEG legs and an APWH wheel kit.

How heavy are 10 ft 6 in siding brakes?

At 10 ft 6 in a Van Mark TrimMaster weighs 123 pounds, a Metal Master 20 148, an Alum-A-Pole QMS 162 and the Industrial Metal Master 259.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder