Best Sellers
Truck Bed Slides in Three Payloads, Partial or Full Extension, Drawer-Mounted Decks, Guardrails, Bins and More
Payload and extension choices, roll-out decks on drawer systems, guardrail and bin kits sized by slide length, and how caps and tonneau covers fit on a truck once a deck rolls out.
Truck bed slides roll heavy gear out past the tailgate so nobody climbs into the bed after it, and Nation Wide Ladder checks the truck's bed length, width and model year before quoting the DECKED and BEDSLIDE equipment that fits. Our best sellers cover the DECKED CargoGlide in three payloads, slides mounted over the DECKED Drawer System, BEDSLIDE Classic guardrails and BedBin storage, and the LEER tonneau covers that close the bed over them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Truck Bed Slides Compared by Payload, Extension and Deck Build
Payload is the first number on any of the truck bed slides we quote. DECKED builds the DECKED CargoGlide in 1,000, 1,500 and 2,200 lb versions, each with a choice of 70 or 100 percent extension, on a steel and aluminum frame with a tray of resin coated marine-grade plywood. Multi-position cargo stops hold the load, and high sides and extra tie-downs are offered. A full 100 percent extension brings cargo that rides against the cab right to the tailgate, which matters for a generator or compressor stored deep in a long truck bed.
BEDSLIDE, a maker of roll-out slides since 1999, rates its 1000 Classic for 1,000 lb evenly distributed with three quarter extension. Classics run 58 to 95 inches long and 39 to 48 inches wide, weigh about 73 lb and stand 4.5 inches tall, the depth a deck takes out of the truck under a cap or cover. The WeatherDeck composite surface carries four D-ring tie-downs, cam follower bearings rated at 3,282 lb static carry the outer end, and the deck locks in several positions. BEDSLIDE builds the Classic in the USA with a lifetime warranty once registered.
Our team checks the truck’s make, year, bed length and width against each deck size before we quote, so the slide arrives sized for your truck.
Truck Bed Slides Over Drawers and Under Caps or Tonneau Covers
A slide can work alone or ride on top of storage. DECKED builds the CargoGlide to mount on a full-size or midsize DECKED Drawer System, which puts two lockable full-length drawers under a deck rated for 2,000 lb spread evenly, with 400 lb per drawer. The Drawer System fastens at the factory tie-down points, which spares most full-size trucks any drilling, though 8 foot beds and some midsize models take a few small holes, and DECKED puts the job at about two hours with hand tools. Pairing the two gives a truck locked tool storage underneath and roll-out cargo on top.
Covers come next. The DECKED system rides under the bed rails, leaving most tonneau covers, caps and camper shells usable, while drop-in liners and mats have to come out and spray-in liners can stay. We list LEER tonneau covers, including the LEER HF350 and SR250, for any truck that needs its cargo area closed. Measure the loaded deck height against the cover or cap before ordering, since a slide raises the floor of everything that rides on it.
Book a free consultation at our Windham, NH or Worcester, MA showroom to plan drawers, slides and a cover for your truck together.
Guardrails and BedBins That Keep Cargo on Truck Bed Slides
Once a deck rolls out of the truck, loose gear can drop off its sides, and BEDSLIDE accessories close those edges. The BedSlide Classic guardrails add a rail and tower to each side on a T-slot track with hand tightened hardware, and the T-slot doubles as extra tie-down points. Kits go by deck length, with the BSA-GRK50 for Classics up to 65 inches, the BSA-GRK60 for 70 to 79 inches and the BSA-GRK80 for 95 inches. No kit fits a 2015 or earlier generation, and CLS part numbers released since October 2018 already carry guardrails.
Bins build on those rails. The BSA-SKB Side Kix adds a 7 by 44 inch bin over each wheel well plus a BEDTRAX crossbar at the headboard, and the BSA-BKB complete kit adds 18 inch Mini Kix bins and a 44 inch deck divider. Both need guardrails or TraxRails, and the complete set takes about 64 inches of deck, so bins may overlap on decks 65 inches and shorter. Decks narrower than 48 inches need the BEDTRAX support trimmed, and BEDSLIDE makes both bin kits in the USA.
Our own trucks deliver door to door across New England, so the guardrails, bins and hardware for a slide arrive in one shipment.
Truck Bed Slides in the Wider Pickup Layout
A slide claims the truck floor, so a crossover box, rack legs or drawers all have to work around it. Over-bed truck ladder racks that mount on the rails keep the floor clear for a deck, and our DECKED truck bed storage and BedSlide accessories pages go deeper on each maker’s parts.
If you are weighing slides against racks, boxes and covers from several makers, open our ladder and truck equipment brands hub.
Truck Bed Slides Quoted by Make, Year and Length
Nation Wide Ladder has served contractors and homeowners for over 50 years, and we quote truck bed slides, drawers, rails and covers together as part of our best-selling truck equipment. Call 603-434-6911 or 508-754-3030 with your truck details, and our own trucks deliver across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine.
Truck Bed Slides FAQs
Which truck bed slides carry the heaviest loads?
The DECKED CargoGlide comes in 1,000, 1,500 and 2,200 lb payloads, while the BEDSLIDE 1000 Classic is rated for 1,000 lb evenly distributed.
Can truck bed slides mount over a drawer system?
Yes. DECKED builds the CargoGlide to mount on a full-size or midsize DECKED Drawer System, giving locked drawers underneath and roll-out cargo on top.
Will a tonneau cover still fit with truck bed slides?
DECKED says its Drawer System sits under the bed rails, so most tonneau covers and caps stay usable. With a slide on top, measure the loaded height against the cover and we will confirm fit.
Should truck bed slides extend 70 or 100 percent?
A 100 percent CargoGlide brings cargo from the cab end to the tailgate, while a 70 percent version or the three quarter BEDSLIDE Classic keeps more of the deck supported inside the truck.
Do BedSlide guardrails fit every truck bed slide?
No. The Classic kits are sized by deck length and do not fit 2015 and earlier BEDSLIDE generations, and CLS models released since October 2018 already include guardrails.
Does a DECKED drawer system under a slide need drilling?
Most full-size trucks need none because it bolts to the factory tie-down points, while 8 foot beds and certain midsize models take a few small holes.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.









