Best Sellers
Ladders in Fiberglass and Aluminum, Extension, Step, Multi-Position, Podium, Platform and Manhole Designs and More
Werner and Louisville best sellers, duty ratings from Type II to Type IAA, nonconductive fiberglass rails for electrical work, aluminum for lighter carrying, and the job each design suits.
Choosing ladders for a crew comes down to reach, duty rating and rail material, and Nation Wide Ladder narrows the field to the Werner and Louisville models contractors order most, then helps you match each one to the work. Our best sellers cover extension ladders, step and twin step ladders, single and manhole ladders, and specialty multi-position, podium, leaning and platform ladders, in fiberglass and aluminum.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Shop Ladders by Type
Extension LaddersFiberglass and aluminum extension ladders from Werner and Louisville, compared by rating, rail material and real reach, from…
Step LaddersWerner and Louisville step ladders compared by rating, rail material, top design and height, from single-sided fiberglass models…
Single and Manhole LaddersWerner and Louisville single and manhole ladders compared by rail material, rating, width and length, from fiberglass straight…
Specialty LaddersWerner and Louisville specialty ladders sorted by the problem they solve, from podium and platform models to leaning,…
Ladder AccessoriesThe ladder accessories contractors order most, from standoff stabilizers and leg levelers to roof straps, buckets and replacement…
Fiberglass LaddersWerner and Louisville fiberglass ladders compared by design, rating and height, from single-sided and twin steps to podium,…
Aluminum LaddersLouisville and Werner aluminum ladders compared by rating, height and weight, from AS2100 and AS3000 painter steps to…
Best-Selling Extension Ladders for Gutters, Siding and Roof Access
The extension ladders contractors order most are fiberglass, because OSHA 1926.1053 calls for nonconductive side rails wherever the worker or the ladder could contact exposed energized equipment. The Werner D6200-2 is the everyday choice, rated Type IA at 300 pounds with 1.63 inch D-rungs, and the Werner D7100-2 moves up to Type IAA at 375 pounds for climbers who carry heavy tools. The Louisville FE3200 is the other fiberglass favorite, rated Type IA for 300 pounds in 16 to 40 foot lengths.
Aluminum still earns a place on ladders that are carried far and set up away from power lines. The Werner D1200-2 is rated Type II at 225 pounds for lighter use, while the Werner D1500-2 and the Louisville AE1200 and AE2200 step up to Type IA. On Werner’s D-series extension ladders the base and fly separate, so the base can work alone as a straight ladder, and Werner advises choosing a size 7 to 10 feet longer than the highest point the ladder rests against. Our ladders by height pages set each size side by side.
Over 50 years of quoting ladders for homeowners and contractors has taught us to ask about the building and the power lines before we suggest a length.
Single-Sided and Twin Step Ladders Crews Reach for Every Day
The Werner 6200 series is a single-sided fiberglass step ladder rated Type IA at 300 pounds, a sensible default for most trade crews and the place many of our step ladder quotes start. When the climber, tools and material add up to more, the Werner 7300 moves up to Type IAA and 375 pounds, with a heavy aluminum top, internal spreaders and sizes from 3 to 12 feet. The Louisville FS1500 is a Type IA fiberglass step ladder with a tool slot top and magnet, and a 6 foot FS1500 weighs 20 pounds.
Twin step ladders put steps on both sides, which saves repositioning when the work moves around a fixture. The Werner T6200 is a Type IA twin model, and the Louisville FM1500 is the Type IA option in that maker’s twin range. For occasional use, the Louisville L-3016 is a straightforward Type IA ladder. OSHA requires a self-supporting portable ladder to hold at least four times its maximum intended load, or 3.3 times for extra-heavy-duty Type IA metal or plastic models, so the rating on these ladders carries a real test margin. Werner sets the highest standing level on a step ladder at two steps down from the top.
Our own Apprentice, Journeyman and Master ladder classes give you a second way to compare step ladders, and we place the FS1500 in Journeyman and the L-3016 in Apprentice.
Multi-Position, Podium, Leaning and Platform Ladders for Awkward Jobs
Specialty ladders solve problems a standard design cannot. The Werner MT multi-position ladder sets up five ways, as a twin step ladder, a stairway step ladder, an extension ladder, a wall ladder or a pair of bases for a scaffold plank, and it is rated Type IAA at 375 pounds in 13, 17, 22 and 26 foot reach heights. A remodeler who swaps three ladders for one MT frees up room on the van.
For longer stints at one height, the Werner PD6200 fiberglass podium is rated Type IA and is easier to move than scaffolding or a lift. The Louisville FXP1700 Pinnacle Pro platform adds a 30 inch handrail around the standing area. The Werner L6200 leaning ladder works as a normal stepladder and can also rest against a flat wall, an inside corner, a pole or an exposed stud, letting the climber stand closer to the work, and it runs from 4 to 12 feet at Type IA. Every Werner specialty model we supply is rated either Type IA or Type IAA.
Our team helps you select the right ladders for the job, so a stairwell, a utility pole or a long ceiling run gets the specialty design that suits it.
Werner and Louisville Ladders Within the Wider Brand Range
Werner and Louisville make most of the ladders on our best-seller list, and each maker has its own section with every series we carry. Our Werner extension ladders page runs from the Type II D1200-2 to the lighter Aerolite B7100-2 built for utility and telecom crews, while Louisville extension ladders add the 60 foot three-section AE1660. Accessories follow the same brands, and Werner lists its PK80-2 leg levelers as fitting every length of the D6200, D7100, D1200, D1300 and D500 series.
Weighing ladders against racks, job boxes and fall protection from other makers is easiest in our ladder and truck equipment brands hub.
How Duty Ratings and Rail Materials Narrow Down Ladders for Each Trade
Every ladder carries an ANSI duty rating that sets the most weight it is built to hold, and OSHA counts the climber plus all tools, equipment and materials toward that load. Cal/OSHA lists Type IAA at 375 pounds, Type IA at 300, Type I at 250, Type II at 225 and Type III at 200. A roofer carrying bundles will pass a 250 pound limit quickly, which is where Type IA and Type IAA ladders earn their place, while homeowners doing seasonal tasks can often work within a lighter rating.
Rail material is the second filter. Louisville marks its fiberglass ladders as safe around electricity and its aluminum ladders as unsafe, and Cal/OSHA adds that water can make a ladder conductive, so fiberglass reduces risk around power but never makes live electrical work safe. Straight climbs follow the same logic. Werner’s single ladders run from the aluminum D500-1 to the fiberglass D6200-1, Louisville lists the fiberglass FE3100 and the aluminum AE2100, and both makers offer manhole ladders for vault access, the Werner M7100-1 and the Type IAA Louisville FE8900. For roof or deck access, OSHA wants the side rails extending a minimum of 3 feet above the landing surface.
Send us the crew’s heaviest climber and the job list, and we quote ladders at the rating and rail material that fits, by phone at 603-434-6911 or 508-754-3030.
Quotes on Ladders for Contractors and Homeowners
Nation Wide Ladder quotes ladders from two showrooms, in Windham, New Hampshire and Worcester, Massachusetts, with free in-person consultations at both and Saturday morning hours. Our own trucks deliver door to door across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine, with regular weekly runs from New Hampshire to Maine and shipping anywhere in the US, so the Werner and Louisville ladders on this list reach the job ready to climb.
Ladders FAQs
Which ladders do contractors order most?
Fiberglass extension and step ladders rated Type IA or Type IAA lead the list, such as the Werner D6200-2 and 6200 series and the Louisville FE3200 and FS1500.
Should I choose fiberglass or aluminum ladders?
Fiberglass rails are nonconductive, which OSHA calls for wherever a worker or ladder could contact exposed energized equipment. Aluminum is lighter to carry for work away from power lines.
What duty rating do ladders for daily trade use need?
Type IA at 300 pounds suits most climbers with a tool belt, and Type IAA at 375 pounds leaves headroom for heavier workers carrying material. OSHA counts the climber, tools and materials together.
How long should extension ladders be?
Werner advises choosing an extension ladder 7 to 10 feet longer than the highest point it rests against, since the sections overlap and the top rungs are not a standing level.
Can one of your ladders replace several?
The Werner MT multi-position ladder sets up as a twin step ladder, a stairway step ladder, an extension ladder, a wall ladder or a pair of scaffold bases, rated Type IAA at 375 pounds.
Do you deliver ladders?
Yes. Our own trucks deliver door to door across New England, with weekly runs to Maine, and we ship anywhere in the US.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.











