Werner Extension Ladders

Werner Aerolite Extension Ladders in B7100-2 Standard, CL Leveler and B7100-2X Cable Hook Models and More

Type IAA fiberglass at 375 pounds with a lighter build, BOXLOK box rails, Traction-Tred tri-rungs, 20 to 32 foot sizes and factory-fitted V-rungs, cable hooks and levelers.

Utility, telecom and electrical crews who carry a 375 pound ladder from truck to pole all day face a weight problem, and Nation Wide Ladder tackles it with Werner Aerolite extension ladders, a Type IAA fiberglass build that Werner says weighs 25 percent less than a standard ladder at that rating. We quote the standard B7100-2, the CL models with a V-rung and leveler system, and the B7100-2X with a factory cable hook and V-rung, and we help you pick the Werner Aerolite fit-out your work needs.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Utility Crews Pick Werner Aerolite Extension Ladders

A Type IAA rating usually means a heavier ladder, and that weight adds up for a crew that sets a ladder dozens of times a shift. Werner designed the Aerolite extension ladder as a lighter alternative to its standard 375 pound extension ladder, keeping the same reach and rating while cutting about a quarter of the weight, which Werner links to less fatigue and more output through the day. For a crew raising and lowering a ladder at pole after pole, that saving repeats with every move.

Weight is only part of it. Werner Aerolite rails are fiberglass, which meets OSHA’s call for nonconductive side rails wherever the worker or ladder could touch exposed energized equipment, a daily concern on poles, strands and service drops. Cal/OSHA still warns that water makes a ladder conductive, so wet rails lose that protection. The Werner Aerolite B7100-2 suits electricians and facility teams, while the Werner Aerolite B7100-2X is set up for utility and telecom aerial work.

Our own trucks deliver door to door across New England, which spares your crew a long drive to collect a 32 foot Werner Aerolite.

Werner B7100-2 Series – Type IAA Aerolite Fiberglass Extension Ladder

Werner Aerolite B7100-2, CL and B7100-2X Extension Models Compared

The standard B7100-2 comes in four sizes, the B7120-2, B7124-2, B7128-2 and B7132-2, covering 20 to 32 feet. The 24, 28 and 32 foot sizes also come as CL versions, the B7124-2CL, B7128-2CL and B7132-2CL, which add a V-rung and leveler system at the top and foot of the ladder.

The B7100-2X range starts at 24 feet and arrives with a cable hook and V-rung installed at the factory, for aerial work on strands and on poles up to 10 inches across. Each size comes in two fit-outs. The 9085 models, such as the B7128-2X9085, carry the cable bar and V-rung alone, while the 9295 models, such as the B7132-2X9295, add the leveler system. That gives six B7100-2X choices across 24, 28 and 32 feet, all at Type IAA and 375 pounds. Because every Werner Aerolite extension size shares that rating, the choice comes down to height and fittings rather than load.

When a crew already owns levelers, the 9085 or plain B7100-2 keeps the price down, and when the ground changes from pole to pole, the CL or 9295 saves fitting parts on site.

Our team checks each Aerolite part number against the poles, strands and ground your crew works on, so the fit-out on your quote is the one you need.

Werner B7100-2X Series – Type IAA Aerolite Fiberglass Extension Ladder

Werner Aerolite BOXLOK Rails, Tri-Rungs and Care

Werner builds the Aerolite on BOXLOK interlocking box rails, a patented shape that Werner says cuts bounce, twist and side sway compared with other lightweight ladders. The rungs are Traction-Tred tri-rungs with a wide, flat, slip-resistant standing surface, which helps on long stints at a strand or pole top.

Type IAA is the special duty class on the Cal/OSHA scale, a 375 pound working load that OSHA counts as the climber, tools and materials together. For a leaning ladder, OSHA sets a test of four times that maximum intended load. Werner’s own sizing advice still applies, so pick the length by maximum reach height and stand no higher than the fourth rung from the top. Cal/OSHA sets a minimum overlap of 36 inches on two-section extension ladders up to 32 feet, which covers every Aerolite size, so even the 32 foot models reach a few feet short of their label. Werner’s leveler fitment list names its D6200 and D7100 fiberglass series but not the Aerolite, so crews who want levelers should look at the CL and 9295 versions, which arrive with them fitted.

For care, Cal/OSHA asks users to check fiberglass for cracks, chips, splinters and rails or rungs deformed by heat or chemicals, and to store it out of sunlight. Werner replaces labels, feet, ropes, pulleys and locks but not sections, and it recommends retiring a damaged ladder.

Our weekly delivery runs from New Hampshire to Maine help crews there replace a retired Aerolite without a long wait.

Werner Aerolite Extension Ladders on the Utility Truck

On a utility or telecom truck the Aerolite rides beside harnesses, lanyards and hand tools, and its length decides the rack, since Cal/OSHA advises carrying extension ladders with the fly retracted and storing them on racks that support them. Heavier and lighter alternatives sit together under Werner extension ladders.

Should the truck itself need racks or boxes, you can line up every manufacturer we stock in our ladder and truck equipment brands hub.

Quotes on Werner Aerolite Extension Ladders and Utility Fit-Outs

A lighter Type IAA build, standard, CL and B7100-2X fit-outs and sizes from 20 to 32 feet let each crew match the ladder to its work. Send the part numbers or the job details, call 603-434-6911 or 508-754-3030, and we will quote Werner Aerolite extension ladders for your crew, with the rest of the Werner range in our store and the Werner brand overview one click away.

Werner Aerolite Extension Ladders FAQs

How much lighter are Werner Aerolite extension ladders?

Werner says the Aerolite weighs 25 percent less than its standard 375 pound rated extension ladder while keeping the same Type IAA rating.

What does CL mean on a Werner Aerolite?

The CL versions of the 24, 28 and 32 foot B7100-2 add a V-rung and leveler system.

What is the difference between Aerolite B7100-2X 9085 and 9295 models?

Both have the factory cable bar and V-rung. The 9295 models add the leveler system.

How large a pole can a Werner Aerolite B7100-2X work on?

Werner sets up the B7100-2X for aerial work on strands and on poles up to 10 inches.

Which sizes do Werner Aerolite extension ladders come in?

The B7100-2 comes in 20, 24, 28 and 32 feet, and the B7100-2X in 24, 28 and 32 feet.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder