Werner Extension Ladders
Werner 20 ft Extension Ladders in Aluminum, Fiberglass, Heavy-Duty D500, Three-Section and AERO Models and More
The length where the D500-2 and AERO lines begin, with eight series compared on weight, Type rating, rails and the reach a 20 foot ladder gives on taller single-storey and low two-storey work.
Werner 20 ft extension ladders sit between short household ladders and two-storey trade ladders, and at this length the choice widens to eight Werner series. Nation Wide Ladder quotes the aluminum D1220-2, D1320-2, D1520-2 and D520-2, the fiberglass D6220-2 and D7120-2, the three-section D6220-3 and the AERO B7120-2, and we help you pick the rating and weight that suit your work.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Jobs Within Reach of Werner 20 ft Extension Ladders
Werner’s ladder height chart puts the average reach of a 20 foot ladder at 19 feet, assuming a user 5 feet 7 inches tall with a 12 inch reach. That range covers single-storey homes with tall eaves or steep roofs, split-level houses, porch roofs and many commercial storefronts, where a 16 foot model falls short. Werner recommends choosing an extension ladder 7 to 10 feet longer than the highest support point, so measure that point first.
Werner sets the highest standing level four rungs down from the top. If you plan to step onto a roof, OSHA requires the rails to extend at least 3 feet above the landing, which eats into the useful length. The three-section D6220-3 gives the same 17 foot working height as the D6220-2, by Werner’s figures, while closing to 8 feet 4 inches against 120 inches for a two-section 20 foot ladder. That makes the three-section model a good fit for crews whose vehicles cannot carry a 10 foot ladder, at the cost of an extra section to manage when raising it.
At our Windham and Worcester showrooms we can set a 20 ft two-section and three-section ladder side by side so you can judge the difference.
Where the Werner 20 ft D500-2 and AERO Lines Start
Twenty feet is the shortest size we list in the Werner D500-2 series and the Werner AERO B7100-2. Werner lists the D520-2 at 42 pounds and Type IAA for 375 pounds, with extra heavy-duty rails and notched end caps for separating the sections. The AERO B7120-2 reaches the same Type IAA rating at 37.9 pounds, with BOXLOK box rails and Traction-Tred tri-rungs, which Werner describes as 25 percent lighter than its standard 375 pound ladders.
The fiberglass D7120-2 is also Type IAA, at 50 pounds, while the D6220-2 is Type IA at 44.5 pounds. In lighter aluminum, the D1220-2 weighs 27 pounds and is rated Type II for 225 pounds, with the D1320-2 at Type I and the D1520-2 at Type IA in our listings.
That spread means a 375 pound rating at this length can weigh anywhere from 37.9 to 50 pounds, depending on rail material and design, so the choice comes down to whether you need fiberglass near power and how often the ladder moves.
Our team compares rating and weight for your crew, so the Werner 20 ft extension ladder on the quote suits the climbers and the job.
Rails, Rungs and Feet on Werner 20 ft Models
Werner builds its aluminum extension ladders with 1.75 inch D-rungs to ANSI A14.2, and its fiberglass D6200 and D7100 models with 1.63 inch D-rungs to ANSI A14.5. Fiberglass rails meet OSHA’s call for nonconductive side rails near exposed energized equipment, so electricians and HVAC installers working near service entrances and condensers lean toward the fiberglass models, while painters and roofers away from power often choose aluminum to save weight. Whatever the rail, OSHA requires a ladder used for roof access to extend at least 3 feet past the landing, and it bars moving, shifting or extending a ladder while anyone is on it.
At the foot, Werner fits the D7100 and AERO with dual action feet, the D6200, D1200 and D1500 with Shu-Lok shoes and spur plates, and the D500 with a heavy duty, self-aligning, free-swinging shoe. The D7100-2 has riveted rungs that Werner describes as replaceable, and pre-pierced holes for a V-rung and cable hooks according to our store listing.
We run regular weekly deliveries to Maine from New Hampshire, so a Werner 20 ft extension ladder can reach Maine crews with the rest of an order.
Werner 20 ft Extension Ladders Among Exterior Gear
A 20 foot ladder often works with a stabilizer for gutters, a leveler for sloped ground and a rack to carry it, and many crews keep a stepladder alongside for the interior side of the same job. Painters often carry a 20 ft extension ladder with a shorter one so two people can work the same wall at different heights. The 20 ft extension ladders from all our brands compare makers at this length, and our Werner extension ladder lineup holds every other size.
Racks and boxes from other makers sit in our ladder and truck equipment brands hub.
Quotes on Werner 20 ft Extension Ladders
Eight series at this length give a choice from a 27 pound household ladder to a 375 pound AERO, with fiberglass and three-section options between them for electricians and van crews. Send us the job heights and how the ladder travels, or call 603-434-6911 or 508-754-3030, and we will quote Werner 20 ft extension ladders from the Werner range in our store with the Werner brand page for background.
Werner 20 Ft Extension Ladders FAQs
How high does a Werner 20 ft extension ladder reach?
Werner puts it at 19 feet on average in its ladder height chart, based on a 5 foot 7 inch climber with a 12 inch reach.
Which is the lightest Werner 20 ft Type IAA ladder?
The AERO B7120-2, which Werner lists at 37.9 pounds, against 42 for the D520-2 and 50 for the D7120-2.
What working height does the Werner D6220-3 give?
Werner gives the D6220-3 a 17 foot working height, the same as the D6220-2, and lists it at 8 feet 4 inches closed.
Is 20 ft the shortest Werner D500-2 size?
Yes. The D500-2 series starts at the D520-2 in our listings and runs up to 48 feet.
Which Werner 20 ft extension ladder is lightest overall?
The aluminum D1220-2, which Werner lists at 27 pounds and rates Type II for 225 pounds.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.










