Werner Extension Ladders

Werner Fiberglass Extension Ladders in D6200, D7100 and Aerolite Series, Type IA to IAA, with Utility Fittings and More

Nonconductive rails and their clean-and-dry limits, 300 and 375 pound ratings, interlocking and box rails, strand and pole fittings, leveler fitment and inspection.

Werner fiberglass extension ladders solve the problem electricians, utility crews, construction trades and industrial maintenance teams face whenever a climb could bring them near energized equipment, because the side rails are nonconductive. Nation Wide Ladder helps those crews pick the right series and fittings, and we carry five Werner fiberglass series, the D6200-2, D6200-3 and D7100-2 plus the lighter Aerolite B7100-2 and B7100-2X, rated at 300 pounds (Type IA) or 375 pounds (Type IAA).

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Electrical Trades Choose Werner Fiberglass Rails

On a job site the rule is fixed. OSHA 1926.1053 requires ladders with nonconductive side rails anywhere a worker or the ladder might touch exposed energized equipment, which points service upgrades, lighting and sign work, panel jobs and climbs near overhead lines toward fiberglass. Werner recommends fiberglass for electrical work, construction jobsites and industrial settings, and describes fiberglass as the material professional contractors prefer.

Nonconductive has conditions, though. Werner applies the property to a ladder that is clean and dry, and Cal/OSHA warns that water on a wet ladder makes it conductive, so wet, muddy or residue-coated rails lose that protection. Wipe the rails down after wet work and keep every part of the ladder, and yourself, clear of live parts.

Werner also credits fiberglass with strength and stability under heavy loads, resistance to denting, rust and corrosion, and design and testing for extreme temperatures, with a Werner Fiberglass Ladder Technical Manual covering UV, weather and cold. Werner positions aluminum as the lighter material, so a painter or gutter crew working well away from wiring may prefer Werner aluminum extension ladders.

Stop by our Windham NH or Worcester MA showroom for a free consultation, and we will talk through where your crew works near power before you choose.

Werner B7100-2 Series – Type IAA Aerolite Fiberglass Extension Ladder

Werner Fiberglass Extension Ladders in the D6200, D7100 and Aerolite Series, Sized from 16 to 40 Feet

The Werner D6200-2 is the Type IA workhorse, rated for 300 pounds in 16, 20, 24, 28, 32, 36 and 40 foot sizes. Werner positions the D6200-3 as a more compact alternative to a two-section ladder, with three sections and the same 300 pound rating in 16 to 32 foot sizes, and its base section can be removed and used on its own.

The Werner D7100-2 Type IAA fiberglass extension ladder steps up to 375 pounds across 16 to 40 foot sizes, with pre-pierced holes ready for a V-rung and cable hooks.

The Werner Aerolite B7100-2 is a lightweight 375 pound Type IAA extension ladder, about 25 percent lighter than a standard ladder at that rating. Patented BOXLOK interlocking box rails are designed to reduce bounce, twist and side sway, and Traction-Tred tri-rungs give a wide, flat, slip-resistant place to stand. Sizes run from 20 to 32 feet, and CL versions of the 24, 28 and 32 foot models add a V-rung and leveler system. The Werner Aerolite B7100-2X arrives with a factory-installed cable hook and V-rung for aerial work on strands and on poles as large as 10 inches across, in 24, 28 and 32 foot sizes, with or without levelers.

Read these series against our Apprentice, Journeyman and Master ladder classes when you want a quick build-quality comparison for each crew.

Werner B7100-2X Series – Type IAA Aerolite Fiberglass Extension Ladder

Rail, Rung and Shoe Details on Werner Fiberglass Ladders

The Werner D-series fiberglass extension ladder uses 1.63 inch slip-resistant D-rungs secured with Werner Alflo rung joints, which Werner links to Twist-Proof performance on the D6200-2. Spring-loaded heavy duty extruded rung locks hold the fly. On the D6200-2 the side rails interlock, with internal guides on the bottom of the fly and external guides at the top of the base, and the same ladder adds a combination rail shield bracket and Shu-Lok shoe with a slip-resistant pad, molded rung braces on the bottom step, mar-resistant molded end caps and pre-pierced holes for fitting accessories in the field.

Ratings follow the duty scale Cal/OSHA publishes, with Type I at 250 pounds, Type IA at 300 and Type IAA at 375. Count tools, material and the worker’s belt against that figure, since OSHA treats the maximum intended load as the total of all of it at once, and its test for a leaning portable ladder is four times that load, or 3.3 times for the extra-heavy-duty Type IA class in plastic or metal.

Two more OSHA rules matter at a panel or fixture. Carry nothing up that could throw you off balance, and set the ladder on uneven or unstable ground only when it is tied or otherwise secured.

Our team checks each Werner fiberglass rating against what your crew carries aloft, so the ladder you order suits the load.

Werner D6200-2 Series – Type IA Fiberglass Extension Ladder

Choosing and Caring for Werner Fiberglass Extension Ladders

Start from the rating when comparing Werner fiberglass extension ladders. A crew that climbs with heavy belts, conduit or utility hardware every day is better matched to Type IAA, which means the Werner D7100-2 or an Aerolite. Between those two, the Aerolite saves weight for a crew carrying the extension ladder from truck to pole all day, while the D7100-2 offers longer sizes up to 40 feet. At Type IA, the D6200-2 covers the widest size range and the D6200-3 suits crews who want a shorter extension ladder to transport.

Size by maximum reach height rather than nominal length, since overlapping sections shorten the usable reach, and keep your feet at or under the fourth rung from the top. On uneven ground, Werner lists PK70-1 levelers for the D6200 and D7100 and PK80-2 levelers for the D7100, while the CL and 9295 Aerolite models arrive with levelers fitted.

Inspect the rails, rungs, locks, shoes and hardware before every climb, and look closely at the fiberglass for cracks or other damage. Werner does not repair damaged ladders or sell replacement sections, but it supplies replacement labels, feet, ropes, pulleys and locks, and OSHA requires ladder labels to stay in place.

Our own trucks deliver door to door across New England, which takes the hassle out of moving a 40 foot Werner fiberglass extension ladder to the job.

Werner D6200-3 Series – Type IA 3 Section Fiberglass Extension Ladder

Werner Fiberglass Ladders Within a Utility Crew Setup

A utility or electrical crew seldom stops at one ladder. The fiberglass extension ladder rides on a rack beside stepladders, tool storage and often fall protection gear, and the longest ladder on board sets the rack length the truck needs. Other materials and sizes are grouped under all Werner extension ladders.

When you want to set those pieces side by side, browse each maker we stock through our ladder and truck equipment brands hub.

Werner D7100-2 Series – Type IAA Fiberglass Extension Ladder

Quotes on Werner Fiberglass Extension Ladders for Your Crew

Nonconductive rails, 300 and 375 pound ratings and Aerolite models ready for strand and pole work give electrical and utility crews a clear set of choices. Send us the series, sizes and any utility fittings you need, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner fiberglass extension ladders for your crew. Compare models in our fiberglass extension ladder category or return to the main Werner page.

Werner Fiberglass Extension Ladders FAQs

Are Werner fiberglass extension ladders safe near live wires?

Werner rates the rails nonconductive only when clean and dry, and Cal/OSHA warns that a wet ladder conducts electricity. Keep the ladder and yourself clear of energized parts whatever the material.

What separates the Werner Aerolite B7100-2 from the Werner D7100-2?

Both are Type IAA at 375 pounds. The Aerolite is about 25 percent lighter with BOXLOK box rails, while the D7100-2 comes in longer sizes up to 40 feet.

Which Werner fiberglass extension ladder is ready for strand and pole work?

The Werner Aerolite B7100-2X, which ships with a factory-installed cable hook and V-rung for working on strands and on poles as large as 10 inches.

Does the Werner D6200-3 carry the same rating as the D6200-2?

Yes. Both are rated Type IA at 300 pounds. The D6200-3 adds a third section and comes in 16 to 32 foot sizes.

Which levelers fit Werner fiberglass extension ladders?

Werner lists PK70-1 levelers for the D6200 and D7100 and PK80-2 levelers for the D7100. The CL and 9295 Aerolite models come with levelers fitted.

Can a damaged Werner fiberglass ladder be repaired?

Werner does not repair damaged ladders or sell replacement sections. Labels, feet, ropes, pulleys and locks are available as replacement parts.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder