Werner Extension Ladders
Werner 28 ft Extension Ladders in Aluminum, Fiberglass, AERO With V-Rung and Leveler, and Three-Section Models and More
Taller two-storey homes, gable ends and steep roofs from nine Werner series, with weights from 43 to 74.5 pounds, Type II to IAA ratings and leveler options compared.
Werner 28 ft extension ladders take crews past the eaves of taller two-storey homes to gable peaks, chimneys and upper siding, and at this length weight and leveling start to shape the choice. Nation Wide Ladder quotes all nine Werner series at this size, from the aluminum D1228-2 to the fiberglass D7128-2, the three-section D6228-3 and the AERO B7128-2 with its V-rung, leveler and cable hook versions, and we match one to your work and crew.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Gable Ends and Steep Roofs With Werner 28 ft Ladders
Werner’s ladder height chart gives a 28 foot ladder an average reach of 27 feet, for a user 5 feet 7 inches tall with a 12 inch reach. That suits two-storey homes with high foundations or steep roofs, gable-end siding and trim, chimney flashing and upper windows, along with commercial work on taller single-storey buildings. Werner advises an extension ladder 7 to 10 feet longer than the highest support or contact point, and it sets the highest standing level four rungs from the top.
The three-section D6228-3 reaches the same 25 foot working height as the D6228-2, by Werner’s figures, while closing to 11 feet 4 inches against 168 inches for the two-section models. Werner lists it at 74.5 pounds, the heaviest ladder in the group, so the shorter closed length comes with more weight to raise.
Where the ladder gives roof access, OSHA requires the rails to extend at least 3 feet past the landing, so a roof that sits near the top of the 28 ft range may call for a 32 ft model instead.
Our team measures eaves, gables and roof pitch with you, so the Werner 28 ft extension ladder you order reaches the work from a permitted rung.
Weight Gaps Between Werner 28 ft Extension Series
At this length the weight spread between series is wide enough to feel on every lift. Werner lists the aluminum D1228-2 at 43 pounds and Type II for 225 pounds, the lightest choice for occasional household use. For a 375 pound rating, the Werner AERO B7100-2 in its B7128-2 size weighs 50.1 pounds, against 65.5 pounds for the aluminum D528-2 and 67 pounds for the fiberglass D7128-2, a gap of more than 15 pounds for the same Type IAA class.
The fiberglass D6228-2 sits at Type IA and 59.5 pounds. The D1328-2 and D1528-2 fill the Type I and Type IA aluminum slots in our listings. Werner describes the AERO as 25 percent lighter than its standard 375 pound ladders, built with BOXLOK box rails and Traction-Tred tri-rungs, which explains the gap.
For crews raising a ladder many times a day, those pounds add up, and for crews who set one 28 foot ladder and stay put, the rating and rail matter more than the weight.
Over 50 years of supplying contractors has taught us to ask how often a ladder moves before recommending a 28 ft series.
Levelers, V-Rungs and Cable Hooks on Werner 28 ft Models
Tall ladders magnify any tilt at the base, so leveling options matter more on a 28 foot ladder than on a short one, particularly on sloped lawns, driveways and the uneven ground around older New England homes. Our store lists the B7128-2CL with a V-rung and leveler system, and the Werner AERO B7100-2X in two forms, the B7128-2X9085 with a cable bar and V-rung and the B7128-2X9295 with the same pair plus a leveler. OSHA allows a ladder only on a stable, level surface unless it is secured against movement.
The fiberglass models, the D6228-2, D7128-2, D6228-3 and the AERO, meet OSHA’s call for nonconductive side rails near exposed energized equipment, which suits electrical and utility work. Werner fits the D7100 and AERO with dual action feet, and the D500 with a heavy duty, self-aligning shoe. OSHA bars moving, shifting or extending a ladder while anyone is on it, so adjust the fly from the ground and check that both rung locks have seated before anyone climbs. Set the base about one foot out for every four feet of height to the support, which Werner calls the four-to-one rule.
At our Windham and Worcester showrooms you can see how a leveler sets up before choosing a Werner 28 ft extension ladder for uneven sites.
Werner 28 ft Extension Ladders With Jacks, Racks and Fall Gear
At this length a Werner 28 ft extension ladder often anchors a larger setup, with ladder jacks and planks for siding, a stabilizer for gutters and a rack long enough to carry it. The 28 ft extension ladders from each brand we carry compare makers side by side, and our Werner extension ladder section covers every length in each series.
Truck racks and staging from other makers are listed in our ladder and truck equipment brands hub.
Ordering Werner 28 ft Extension Ladders for Taller Homes
Nine series, a wide weight spread and leveler options give each crew a sound fit at this length, whether the work is a single gable repair or a season of siding. Send us the heights, ground conditions and vehicle, or call 603-434-6911 or 508-754-3030, and we will quote Werner 28 ft extension ladders from the Werner range in our store with our Werner brand page for context.
Werner 28 Ft Extension Ladders FAQs
How much usable reach comes from Werner 28 ft extension ladders?
Werner's chart gives 27 feet as the average reach for this size, measured for a person 5 feet 7 inches tall with a 12 inch reach.
Which Werner 28 ft Type IAA ladder weighs least?
The AERO B7128-2, at 50.1 pounds on Werner's listing, against 65.5 for the D528-2 and 67 for the D7128-2.
Do Werner 28 ft extension ladders come with levelers?
The B7128-2CL and B7128-2X9295 include a leveler system, and the B7128-2X9085 has a cable bar and V-rung without one.
How long is the Werner D6228-3 closed?
Werner lists it at 11 feet 4 inches closed, with a 25 foot working height, the same as the D6228-2.
Which is the lightest Werner 28 ft ladder?
The aluminum D1228-2, listed by Werner at 43 pounds and rated Type II for 225 pounds.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.










