Werner Extension Ladders

Werner 16 ft Extension Ladders in Light Aluminum, Fiberglass Type IA and IAA and Compact Three-Section Builds and More

The shortest Werner extension size we list, from the 22 pound D1216-2 to the D7116-2 and the three-section D6216-3 that closes to 6 feet 4 inches, for single-storey eaves, garages and service vans.

Werner 16 ft extension ladders cover single-storey rooflines, garages, sheds and porch work, and the challenge at this length is choosing between a light ladder for occasional use and a heavier one for daily trade work. Nation Wide Ladder quotes the Werner models at this size, the aluminum D1216-2, D1316-2 and D1516-2, the fiberglass D6216-2 and D7116-2 and the three-section D6216-3, and we match one to your work and how it travels.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Single-Storey Jobs That Suit Werner 16 ft Ladders

Werner’s ladder height chart gives a 16 foot extension ladder an average reach of 15 feet, assuming a user of 5 feet 7 inches with a 12 inch reach. That suits work on single-storey homes and outbuildings, such as clearing gutters on a ranch house, reaching a garage roof, painting fascia or fixing a porch light, along with interior jobs in tall entryways where a wall gives the ladder something to lean on.

Werner places the highest standing level four rungs from the top, and recommends an extension ladder 7 to 10 feet longer than the highest point it rests on or the work you need to reach. For roof access, OSHA wants the rails to run at least 3 feet past the landing. If the eave sits near the top of that range, a 20 ft model is usually the safer buy than stretching from a 16.

A 16 ft extension ladder is also the size most homeowners can carry, raise and store without help, which matters for seasonal tasks done once or twice a year.

Our team asks how often the ladder will be used and by whom, so the Werner 16 ft model on your quote is neither under-rated nor heavier than it needs to be.

Werner D1200-2 Series – Type II Aluminum Extension Ladder

Weight and Rating Across Werner 16 ft Models

Werner lists the Werner D1200-2 in its D1216-2 size at 22 pounds, rated Type II for 225 pounds, the lightest choice for light household use. The D1516-2 steps up to Type IA for 300 pounds at 30.5 pounds with extra heavy-duty I-beam rails. Werner notes that neither the D1216-2 nor the D1516-2 comes with a rope and pulley, so the fly is raised by hand on these models. All the aluminum models use 1.75 inch D-rungs and are built to ANSI A14.2. The D1316-2 sits between them at Type I and 250 pounds in our store listings.

In fiberglass, Werner lists the D6216-2 at 36.5 pounds and Type IA, and the D7116-2 at 41 pounds and Type IAA for 375 pounds, with riveted rungs that Werner describes as replaceable. Fiberglass rails meet OSHA’s call for nonconductive side rails near exposed energized equipment, which makes either one the choice for electricians working on service entrances and exterior lighting. Both use 1.63 inch D-rungs and are built to ANSI A14.5, and the D7116-2 adds dual action feet.

Over 50 years of supplying homeowners and contractors means we can point a weekend user and an electrician toward different Werner 16 ft extension ladders.

Werner D1300-2 Series – Type I Aluminum Extension Ladder

The Werner 16 ft Three-Section Ladder for Vans

The Werner D6200-3 three-section ladder divides its length into three shorter sections. Werner lists the D6216-3 at 6 feet 4 inches closed and gives it a 13 foot working height, rated Type IA for 300 pounds at 40.5 pounds. A two-section 16 foot model is 96 inches long closed, so the three-section version suits a service van, a small pickup or a crowded storeroom where an 8 foot ladder will not fit.

The trade-off is a shorter working height than a two-section ladder of the same nominal size, so check the job height against Werner’s 13 foot figure before choosing it. Like the D6200-2, its base can come away to serve as a single ladder, and its fiberglass rails suit work near power. At the foot, Werner fits the D6200, D1200 and D1500 with Shu-Lok shoes and spur plates, and the D7100 with dual action feet. Whichever model you choose, OSHA allows a ladder only on a stable, level surface unless it is secured, and it bars moving or extending a ladder while anyone is on it.

Our own trucks deliver door to door across New England, so a single 16 ft extension ladder can ride with the rest of your order.

Werner D6200-2 Series – Type IA Fiberglass Extension Ladder

Werner 16 ft Extension Ladders in a Home or Service Kit

A 16 foot ladder often pairs with a 6 foot stepladder for indoor jobs and a ladder stabilizer for gutter work, and for many homeowners it is the only extension ladder they own. The 16 ft extension ladders from every brand we stock compare makers at this size, and our Werner extension ladder category covers each longer model.

Vans that carry a short ladder often need racks from other makers, which you can browse in our ladder and truck equipment brands hub.

Werner D1500-2 Series – Type IA Aluminum Extension Ladder

Requesting Werner 16 ft Extension Ladders

From a 22 pound household ladder to a Type IAA fiberglass model and a three-section ladder for the van, this size covers more needs than its length suggests. Send us your list or call 603-434-6911 or 508-754-3030, and we will quote Werner 16 ft extension ladders from the Werner products we carry with our Werner brand page for reference.

Werner 16 Ft Extension Ladders FAQs

How high can a Werner 16 ft extension ladder get me?

About 15 feet on average, according to Werner's ladder height chart, which assumes a user 5 feet 7 inches tall reaching 12 inches overhead.

Which Werner 16 ft extension ladder is lightest?

The aluminum D1216-2, which Werner lists at 22 pounds and rates Type II for 225 pounds.

Do Werner 16 ft ladders have a rope and pulley?

Werner notes that the D1216-2 and D1516-2 are not equipped with a rope and pulley.

How short does the Werner D6216-3 close?

Werner lists it at 6 feet 4 inches closed, with a 13 foot working height.

Should electricians choose a fiberglass Werner 16 ft model?

Yes. The D6216-2, D7116-2 and D6216-3 have fiberglass rails, which meet OSHA's call for nonconductive side rails near live equipment.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder