Werner Extension Ladders

Werner 24 ft Extension Ladders in Aluminum, Fiberglass, Three-Section, AERO and Utility Cable Hook Models and More

Nine series at one length, from the Type II D1224-2 to the Type IAA D7124-2 and the AERO B7124-2X with cable hook and V-rung, compared on weight, rating, rails and two-storey work.

Werner 24 ft extension ladders are a common choice for two-storey gutters, siding, painting and service drops, and at this length Werner offers more series than at any other size we list. Nation Wide Ladder quotes all nine, aluminum models from Type II to Type IAA, the D6200-2 and D7100-2 in fiberglass, the three-section D6224-3 and the AERO B7124-2 and B7124-2X, and we narrow them to the one that fits your work, your crew and your vehicle.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Two-Storey Work and the Reach of Werner 24 ft Ladders

A 24 foot ladder is sized by the combined length of its sections, and the sections overlap once extended, so the useful reach is less than the label. Werner’s ladder height chart puts the average reach of a 24 ft extension ladder at 23 feet, based on a 5 foot 7 inch person with a 12 inch reach, and Werner sets the highest standing level four rungs down from the top. Werner also advises choosing an extension ladder 7 to 10 feet longer than the highest support or contact point.

That range suits much of the exterior work on a typical two-storey house, such as gutter cleaning, siding repairs, trim painting and window work, along with sign and service work on commercial buildings. Where the job means stepping onto a roof, OSHA requires the rails to extend at least 3 feet past the landing, so measure to the eave before settling on 24 feet.

The three-section D6224-3 is the one exception to the two-section pattern. Werner rates it to a 21 foot working height and lists it at 9 feet 4 inches closed, against 144 inches for the two-section models.

Our team measures the job with you before quoting, so the Werner 24 ft extension ladder you order reaches the work from a safe rung.

Werner B7100-2 Series – Type IAA Aerolite Fiberglass Extension Ladder

Nine Werner 24 ft Extension Series by Rating and Weight

In aluminum, Werner lists the D1224-2 at 33.5 pounds and Type II, the D1324-2 at 40 pounds and Type I, the D1524-2 at 45 pounds and Type IA, and the Werner D500-2 in its D524-2 size at 49 pounds and Type IAA for 375 pounds. Aluminum models carry 1.75 inch D-rungs and are built to ANSI A14.2.

In fiberglass, the D6224-2 weighs 52 pounds at Type IA and the D7124-2 weighs 58.5 pounds at Type IAA, both with 1.63 inch D-rungs and built to ANSI A14.5. The D6224-3 weighs 61 pounds. The Werner AERO B7100-2 in its B7124-2 size reaches Type IAA at 43.6 pounds, which Werner describes as 25 percent lighter than its standard 375 pound ladders, with BOXLOK box rails and Traction-Tred tri-rungs.

Weight matters on a ladder that goes up and down several times a day. A painter moving around a house all day feels every pound, while a crew that sets one ladder and works from it for hours may care more about the rating.

Over 50 years of supplying contractors and homeowners has shown us how differently those two buyers use a ladder, and we quote to match.

Werner D500-2 Series – Type IAA/IA Aluminum Extension Ladder

Utility, Leveler and Rail Options on Werner 24 ft Models

Twenty-four feet is the shortest size where we list the Werner AERO B7100-2X, built for utility and telecom work. The B7124-2X9085 weighs 47.5 pounds and adds a 375 pound cable hook and a rubberized V-rung for strands and poles up to 10 inches across. The B7124-2X9295 adds a leveler system, and the B7124-2CL pairs a V-rung with a leveler on the standard AERO. Levelers earn their place on sloped yards and uneven driveways, since OSHA allows a ladder only on a stable, level surface unless it is secured against movement.

Fiberglass rails meet OSHA’s call for nonconductive side rails near exposed energized equipment, which is why electricians and line crews choose the D6200, D7100 or AERO over aluminum for service drops. Werner fits the D7100 and AERO with dual action feet, the D6200, D1200 and D1500 with Shu-Lok shoes and spur plates, and the D524-2 with a heavy duty, self-aligning shoe. The D1524-2 uses stacked rails, which Werner describes as giving wider fly rungs.

We run regular weekly deliveries to Maine from New Hampshire, so utility crews there can add a Werner 24 ft extension ladder to an order.

Werner B7100-2X Series – Type IAA Aerolite Fiberglass Extension Ladder

Werner 24 ft Extension Ladders Within an Exterior Kit

A 24 foot ladder often works alongside ladder jacks and planks for siding, standoff stabilizers for gutters and a rack on the truck to carry it. Siding crews who stage with jacks usually order a matched pair of Werner 24 ft ladders in the same series so the planks sit level. To compare makers at this length, see the 24 ft extension ladders across our brands, and our full Werner extension ladder range covers every other length.

When the truck rack is part of the order, you can compare makers in our ladder and truck equipment brands hub.

Werner D1200-2 Series – Type II Aluminum Extension Ladder

Quotes on Werner 24 ft Extension Ladders for Exterior Crews

Nine series at one length means there is a fit for a homeowner, a painter and a line crew alike. Send us the job heights and how the ladder travels, or call 603-434-6911 or 508-754-3030, and we will quote Werner 24 ft extension ladders from the Werner range we carry with the Werner brand page for background.

Werner 24 Ft Extension Ladders FAQs

How high do Werner 24 ft extension ladders reach?

Werner's ladder height chart lists an average reach of 23 feet for a 24 ft ladder, assuming a 5 foot 7 inch person with a 12 inch reach.

Which Werner 24 ft extension ladder is lightest at Type IAA?

The AERO B7124-2, which Werner lists at 43.6 pounds against 49 for the aluminum D524-2 and 58.5 for the fiberglass D7124-2.

Is there a Werner 24 ft ladder with a cable hook?

Yes. The AERO B7124-2X9085 has a 375 pound cable hook and a V-rung for poles up to 10 inches, and the B7124-2X9295 adds a leveler.

How short does the Werner D6224-3 close?

Werner lists the three-section D6224-3 at 9 feet 4 inches closed, with a 21 foot working height.

Where is the highest rung I can stand on?

Werner sets the highest standing level on an extension ladder four rungs down from the top.

Which Werner 24 ft ladders suit electrical work?

The fiberglass D6224-2, D7124-2, D6224-3 and AERO models, since fiberglass meets OSHA's call for nonconductive rails near live equipment.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder