Werner Fall Protection Harnesses
Werner Hi-Viz Harnesses in Standard Back D-Ring and Positioning Back and Hip D-Ring Models With Green Webbing and More
The H112004XHV standard and H132004XHV positioning models, green webbing and load indicators, quick connect chest and tongue buckle legs, padding, OSHA hardware limits, inspection and cleaning.
Werner Hi-Viz harnesses use green webbing to keep a worker easy to see and their gear easy to inspect, and the challenge is choosing between the two models and fitting them into the rest of the crew's fall protection. Nation Wide Ladder helps you decide between the H112004XHV standard harness with a single back D-ring and the H132004XHV positioning harness with back and hip D-rings.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Werner Hi-Viz Harnesses Are Built For on Busy Sites
Werner aims these harnesses at demanding applications and professional users. The green webbing and load indicators are there for two reasons. They make the wearer stand out against steel, concrete and sky, and they make the harness itself easier to read during inspection, since a load indicator shows when the harness has been in a fall.
That suits crews where people at height share space with moving equipment and other trades, such as steel and concrete crews on large commercial sites, lift operators, roofers and maintenance teams in busy plants. A supervisor scanning the deck can see who is in a harness, and a competent person checking gear can spot an indicator quickly.
Werner Hi-Viz harnesses carry the comfort features of Werner’s working harnesses. A large back pad is padded to absorb sweat and shaped to stop the harness tangling while it is put on, and shoulder pads add comfort over a long shift. Five adjustment points and lightweight hardware and pads complete the build.
Over 50 years of supplying contractors lets us judge where a Hi-Viz harness earns its place on your crew and where a standard color will do.
Two Werner Hi-Viz Models, Standard and Positioning, Compared
The Werner Hi-Viz H112004XHV standard harness has one D-ring, a rear dorsal ring of forged alloy steel for fall arrest. It is the right choice when a worker only needs to connect a lanyard or self-retracting lifeline at the back, such as on a roof, a lift or a deck edge.
The Werner H132004XHV positioning harness keeps the same forged back D-ring and adds waist D-rings for positioning work, so a worker can lean into a positioning lanyard against a wall, form or structure with both hands free while the back ring stays available for fall arrest.
Both models share a quick connect buckle at the chest and tongue buckles on the leg straps, which Werner describes as simple to use and well suited to a harness shared by more than one worker. Their model numbers mirror the Blue Armor H112004 and H132004 with an XHV suffix, so a crew already using those layouts can move to the Hi-Viz versions without relearning the fit. Both store listings are XL, so give us the sizes your crew needs.
Our team checks each worker’s task against the two layouts, so you buy hip D-rings only where the work calls for positioning.
Fit, Hardware and OSHA Limits for Werner Hi-Viz Harnesses
Visibility does not change the fall arrest rules. Under OSHA 1926.502, a personal fall arrest system worn with a body harness must hold arresting force to 1,800 pounds, limit free fall to 6 feet and stop the worker within 3.5 feet of deceleration. D-rings and snap hooks need a minimum tensile strength of 5,000 pounds and a proof test of 3,600 pounds, and harness webbing must be synthetic fiber. The positioning rings on the Werner H132004XHV fall under the separate positioning rules, which limit free fall to 2 feet.
OSHA also requires the fall arrest attachment on a harness to sit at the center of the wearer’s back near shoulder level, or above the head, which is why the back D-ring position matters when fitting. Set all five adjustment points snug at the start of each shift, with the chest strap across the middle of the chest and the leg straps firm but comfortable.
Send us your crew list with sizes, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner Hi-Viz harnesses in the right layouts.
Inspecting Green Webbing and Load Indicators on Werner Hi-Viz Harnesses
Werner calls for a check before each use and an inspection at least once a year by a competent person other than the user. Start with the load indicators, because Werner says equipment showing a load indicator warning must not be used. Then work along the green webbing for cuts, burns, fraying, paint and chemical damage, check the stitching at each buckle and D-ring, and confirm the forged back ring has no cracks, bends or corrosion. The quick connect chest buckle should latch and release cleanly, and the grommets on the tongue buckle leg straps should show no tearing or stretched holes.
Werner does not mandate a five year service life, so the inspection decides when Werner Hi-Viz harnesses retire, and one that has arrested a fall comes out of service. Clean the harness by hand in a mild soap solution, rinse, wipe it dry and hang it in a dry, shaded place, never in a washer or dryer. Write inspection notes on the label, where Werner prefers them.
Both our showrooms open Saturday mornings, so a crew can swap a retired harness for a new Hi-Viz model before the week starts.
Werner Hi-Viz Harnesses Paired With Lanyards and Anchors
A visible harness still needs the right connector and anchor behind it, and positioning work needs a positioning lanyard for the hip rings as well. The full Werner harness range covers other layouts when a crew needs climbing or retrieval rings. The ladders, staging and truck racks that get workers up to the work usually come from other manufacturers.
To see those manufacturers in one place, visit our ladder and truck equipment brands hub.
Getting Werner Hi-Viz Harnesses for Your Crew From Us
Our own trucks deliver door to door across New England, and we ship anywhere in the US. Look through the Werner brand page or the Werner store, then tell Nation Wide Ladder which workers need visibility and which need positioning rings, and we will quote Werner Hi-Viz harnesses to fit.
Werner Hi-Viz Harnesses FAQs
What Werner Hi-Viz harnesses are available?
Two models, the H112004XHV standard harness with a single back D-ring and the H132004XHV positioning harness with back and hip D-rings.
Why do Werner Hi-Viz harnesses use green webbing?
The green webbing and load indicators make the wearer easier to see and make the harness easier to inspect.
What buckles do Werner Hi-Viz harnesses use?
A quick connect buckle at the chest and tongue buckles on the legs, which suit a harness shared by more than one worker.
Which Hi-Viz harness do I need for positioning work?
The H132004XHV, which adds waist D-rings for a positioning lanyard alongside the back D-ring for fall arrest.
How should Hi-Viz harnesses be cleaned?
By hand in a mild soap solution, then rinsed, wiped and hung to dry in the shade. Werner says never to machine wash or dry them.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.






