Werner Fall Protection Harnesses

Werner ProForm F3 Harnesses in Standard, Climbing, Positioning and Construction Layouts With Steel Hardware and More

Relief cords and the built-in seat, the repositionable dual back pad, WebAlert 2 webbing, SRL bumper and gear loops, tongue buckle and quick connect legs, XS steel hardware and the ProForm SwitchPoint option.

Werner ProForm F3 harnesses are Werner's athletically styled, lightweight harnesses for workers who wear fall protection all day, and the challenge is choosing among eighteen listings that differ by D-ring layout, leg buckle and hardware. Nation Wide Ladder helps you sort standard, climbing, positioning, construction, climbing and positioning, and climbing and construction models, the XS steel hardware versions and the two ProForm SwitchPoint harnesses.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Werner ProForm F3 Harnesses Add After a Fall

The defining ProForm feature is what happens once a fall has been arrested. Pulling the patented Werner relief cords deploys a seat built into the harness, putting the worker in the Gravity Override position that Werner designs to reduce the hazards of suspension trauma while rescue is organized. The dual back pad can then be repositioned to take pressure off the collarbone. A worker left hanging in an ordinary harness has neither option.

Werner builds the ProForm from lightweight materials with fewer contact points against the body, which promotes airflow and comfort on long shifts in summer heat. WebAlert 2 webbing adds a weather resistant coating to Werner’s inspectable webbing. A built-in SRL bumper shields the lower back of workers who carry personal self-retracting lifelines on the harness, and the construction models add gear loops for attaching tool lanyards.

Werner ProForm F3 harnesses suit crews who spend whole days at height, such as steel erectors, roofers, tower and telecom climbers and general contractors on large sites, where comfort affects whether a harness is worn properly.

Over 50 years of supplying contractors lets us compare ProForm F3 comfort features against the harness your crew wears now.

Werner Fall Protection Proform™ F3 H012004 Standard Harness, Tongue Buckle Legs (XL)

Werner ProForm F3 Models by D-Ring Layout and Leg Buckle

Werner makes the F3 range in paired models, one with tongue buckle legs and one with quick connect legs. Standard harnesses, the H012004 and the Werner H013004 standard harness, carry a single back D-ring for fall arrest. Climbing models, the H022004 and H023004, are set up for ladder climbing systems. Positioning models, the H032004 and H033004, add hip rings for positioning work, and construction models, the H032104 and H033104, add the gear loops.

For crews who climb and then work hands-free, the H062004 and H063004 combine climbing and positioning, while the H062104 and H063104 combine climbing with the construction setup. In each pair, the third digit tells you the legs, a 2 for tongue buckle and a 3 for quick connect.

Tongue buckle legs are simple to reset for a different wearer, which suits a harness kept in a gang box, while quick connect legs with their indicator are quicker to clip and release for a worker with an assigned harness. Werner lists cam torso adjustment and roll-down torso web keepers on the standard and construction models, so loose strap ends stay tidy.

Send us each worker’s task and leg buckle preference as a list, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote the matching Werner models.

Werner Fall Protection Proform™ F3 H013004 Standard Harness, Quick Connect Legs (XL)

Steel Hardware, WebAlert 2 and Fit Details on ProForm F3 Harnesses

Werner makes four of these harnesses in XS versions with steel hardware, the H012004XS and H013004XS standard harnesses and the H032104XS and H033104XS construction harness. They keep the relief cords, dual back pad, WebAlert 2 webbing, SRL bumper and quick connect buckles with indicator, and the construction versions keep their gear loops. Steel hardware is the version to ask for when your site or employer specifies it.

Hardware of any kind still has to meet OSHA. Under 1926.502, D-rings and snap hooks need a minimum tensile strength of 5,000 pounds and a proof test of 3,600 pounds without cracking, breaking or permanent deformation, and harness webbing must be synthetic fiber. A personal fall arrest system worn with a body harness must hold arresting force to 1,800 pounds and free fall to 6 feet.

Fit decides how a harness performs in a fall. Set the torso, chest and legs snug before each shift, keep the back D-ring between the shoulder blades and tuck excess web into the keepers. The store listings for Werner ProForm F3 harnesses are XL, so tell us each wearer’s size.

At our Windham NH and Worcester MA showrooms you can try a Werner harness on and compare the hardware versions before you order.

Werner Fall Protection Proform™ F3 H012004XS Standard Harness, Tongue Buckle Legs, Steel Hardware (XL)

ProForm SwitchPoint Versus F3 for Werner Rescue Planning

Werner also makes ProForm SwitchPoint, or ProForm SP, harnesses for climbing and construction, the H062144 with tongue buckle legs and the ProForm SwitchPoint H063144 with quick connect legs. After a fall, the worker pulls a deployment cord that activates the patented SwitchPoint system and moves them into a seated position with freedom to move, which Werner designs to improve rescue operations as well as reduce suspension trauma hazards. Werner describes SwitchPoint as its harness with built-in self-rescue capability.

The F3 relief cords and seat give a suspended worker relief while help arrives, and SwitchPoint goes further for sites where a worker may need to assist in their own recovery. Either way, OSHA expects an employer to plan prompt rescue for anyone who falls, so the harness supports the plan rather than replacing it. Werner calls for a check before each use and an annual inspection by a competent person other than the user, plus hand washing in mild soap with air drying out of direct sun.

Both our showrooms keep Saturday morning hours, so a foreman can compare ProForm SwitchPoint and F3 models outside the working week.

Werner Fall Protection Proform™ Switchpoint™ H062144 Climbing/Construction Harness, Tongue Buckle Legs (XL)

Werner ProForm F3 Harnesses With Personal SRLs and Connectors

The SRL bumper on the F3 assumes a personal self-retracting lifeline on the back, so harness and connector are usually chosen together, along with the anchor. The wider Werner harness range covers Blue Armor, LiteFit and specialty models when a crew needs a different balance of features. Ladders, staging and truck racks for the same job often come from other manufacturers.

You can line those makers up side by side in our ladder and truck equipment brands hub.

Werner Fall Protection Proform™ F3 H013004XS Standard Harness, Quick Connect Legs, Steel Hardware (XL)

Why Crews Source Werner ProForm F3 Harnesses From Us

Our own trucks deliver door to door across New England and we ship anywhere in the US, so mixed sizes and layouts arrive in one order. Browse the Werner brand page or the Werner store, then tell Nation Wide Ladder the trades and sizes on your crew, and we will quote Werner ProForm F3 harnesses to suit them.

Werner ProForm F3 Harnesses FAQs

What do the relief cords on Werner ProForm F3 harnesses do?

After a fall, pulling the relief cords deploys a built-in seat that puts the worker in the Gravity Override position, which Werner designs to reduce suspension trauma hazards.

What is the difference between ProForm F3 and ProForm SwitchPoint?

F3 models use relief cords and a built-in seat. SwitchPoint models, the H062144 and H063144, use a deployment cord that moves the worker into a seated position with freedom of movement to help rescue.

Which Werner ProForm models have steel hardware?

The XS versions, the H012004XS, H013004XS, H032104XS and H033104XS.

What is Werner WebAlert 2 webbing?

It is Werner's inspectable webbing with an added weather resistant coating.

Do Werner ProForm F3 harnesses work with personal SRLs?

Yes. They have an integrated SRL bumper that protects the lower back when personal self-retracting lifelines are worn.

How should Werner ProForm F3 harnesses be cleaned?

By hand with a mild soap solution, then rinsed, wiped and hung to dry in the shade. Werner says never to machine wash or dry them.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder