Werner Fall Protection Harnesses

Werner Climbing Harnesses With Front D-Rings, Hip Positioning Rings, Construction Belts, SwitchPoint and More

Chest D-ring layouts from Blue Armor, LiteFit, ProForm F3 and SwitchPoint for ladder safety systems, poles and towers, with OSHA connection limits, fit checks and ground inspection.

Werner climbing harnesses add a front chest D-ring so a climber can connect to a ladder safety system on a fixed ladder, tower or structure and climb with both hands free. The risk is a loose fit or the wrong ring layout on a short, high climb, and Nation Wide Ladder helps crews choose between climbing-only, climbing and positioning, and climbing and construction versions across the Blue Armor, LiteFit, ProForm F3 and SwitchPoint families.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Werner Climbing Harnesses Earn Their Front D-Ring

A fixed ladder on a water tank, rooftop, silo, telecom tower or industrial platform is a different climb from a portable ladder. Many of these ladders carry a ladder safety system, a rail or cable running the length of the ladder with a sleeve that travels with the climber and locks if they fall. The sleeve connects at the chest, which is why Werner climbing harnesses carry a front D-ring as well as the dorsal ring on the back. OSHA requires that a ladder safety system let the worker climb using both hands, and the connection between the carrier and the harness may not be longer than 9 inches.

Utility and tower work brings in another standard. Under OSHA 1910.269, workers more than 4 feet up on poles, towers or similar structures must use fall arrest, positioning or restraint equipment as the job demands, and since April 1, 2015, qualified climbers have needed fall protection while climbing or changing location unless the employer can show it is infeasible or creates a greater hazard. For those crews, Werner harnesses with hip rings as well as the chest ring handle both the climb and the work at the top.

Tell our team which ladder system, pole or tower your crew climbs and we will help match the Werner layout to it.

Werner Fall Protection Blue Armor H122004 Climbing (Back And Front D-rings) Harness (XL)

Werner Climbing Harnesses by Ring Layout and Family

Climbing-only models carry two rings, back and front. In the Werner Blue Armor family, the H122004 pairs a quick connect chest buckle with tongue buckle legs and the H123004 uses quick connect buckles at chest and legs, both with relief handles, WebAlert inspectable webbing, impact indicators and a forged alloy steel dorsal ring. The Werner LiteFit H321004 brings the two-ring layout at a lighter weight with an adjustable back pad, and the Werner ProForm F3 H022004 and H023004 add relief cords and a built-in seat.

Climbing and positioning models add hip rings for work at the top. The Blue Armor H162004 climbing and positioning harness, the H163004 and the H262004 carry back, hip and front rings, as do the LiteFit H361004 and H362004 and the ProForm F3 H062004 and H063004. Werner climbing and construction versions such as the ProForm F3 H062104 and H063104 add construction features, and the ProForm SwitchPoint H063144 and H062144 add a deployment cord that moves a suspended worker into a seated position while waiting for rescue.

Once the layout is settled, our own trucks deliver the Werner harnesses door to door across New England, and we ship anywhere in the US.

Werner Fall Protection Blue Armor H123004 Climbing (Back And Front D-rings) Harness (XL)

OSHA Standards for Werner Climbing Connections

The front ring has a narrower role than the back ring. OSHA 1910.140 places the fall arrest attachment of a body harness at the center of the back near shoulder level, and permits a pre-sternal attachment only where free fall is limited to 2 feet or less. A ladder safety system creates that situation, because the sleeve rides just in front of the chest and the connection to it is kept short. OSHA 1910.29 also requires the ladder system and its supports to withstand an 18 inch drop of a 500 pound weight without failure, which is why only a sleeve designed for that carrier should go on the chest ring.

Away from the ladder, the climber moves the connection to the back. A shock-absorbing lanyard or self-retracting lifeline on the dorsal ring still has to meet OSHA’s limits of 1,800 pounds maximum arresting force and no more than 6 feet of free fall. Werner warns that components sold as a system are not interchangeable with other makers’ parts, so check the sleeve, lanyard and harness together before the first climb.

Send us the full list of sleeves, lanyards and Werner harnesses on the job, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote it as one system.

Werner Fall Protection Blue Armor H162004 Climbing/Positioning (Back, Hip And Front D-rings) Harness (XL)

Fitting and Inspecting Werner Climbing Harnesses Before a Climb

A loose fit lets the chest ring sag away from the body, which puts slack into the short connection to the ladder sleeve. Adjust the chest strap so the front D-ring sits at mid-chest and the dorsal ring sits between the shoulder blades, then snug the leg straps. Werner’s five-point adjustment on Blue Armor and LiteFit and the cam torso adjustment on ProForm F3 make that setup quick. Quick connect buckles on the H123004 go on fast, while tongue buckle legs on the H122004 and H022004 let shared Werner harnesses be reset for each climber. The store listings are XL, so give us each climber’s size.

Inspect on the ground, never on the tower. Werner asks for a check before each use and an annual inspection by a competent person other than the user. Look at the front D-ring for cracks, distortion, corrosion and sharp edges, check the stitching where it is sewn in, and make sure relief handles, relief cords and the SwitchPoint deployment cord are stowed and undamaged. Clean by hand with mild soap and air dry out of direct sun, and pull any harness that has stopped a fall.

Climbers can try the fit and ask questions at a free consultation in our Windham NH or Worcester MA showroom.

Werner Fall Protection Proform™ F3 H022004 Climbing Harness, Tongue Buckle Legs (XL)

Werner Climbing Harnesses in the Wider Fall Protection Plan

A Werner climbing harness covers the trip up, but the work at the top usually brings in a positioning strap, a lanyard on the back ring or a self-retracting lifeline. The other D-ring layouts are compared in our Werner harness lineup, and the climbing sleeve should always be the one built for the ladder system on site. Tower and facility crews often buy that gear alongside ladders and truck equipment from several manufacturers.

For the other makers on your list, our ladder and truck equipment brands hub puts them side by side.

Werner Fall Protection Blue Armor H163004 Climbing/Positioning (Back, Hip And Front D-rings) Harness (XL)

Why Climbers Get Werner Climbing Harnesses Through Us

We have spent over 50 years serving homeowners and contractors, and our quotes start from the ladder system, the structure and the climber’s fit. Find models in our harness category or go back to the Werner brand overview, then tell Nation Wide Ladder the crew sizes and we will quote Werner climbing harnesses that fit the climb.

Werner Climbing Harnesses FAQs

Can the front D-ring on Werner climbing harnesses be used for general fall arrest?

OSHA 1910.140 allows a pre-sternal attachment only where free fall is limited to 2 feet or less, as with a ladder safety system. General fall arrest uses the back D-ring.

How long can the connection from Werner harnesses to a ladder safety system be?

OSHA limits the connection between the carrier or lifeline and the harness to 9 inches.

Do I have to tie off a Werner harness on a portable ladder?

Werner notes that neither OSHA's ladder standard nor its fall protection standard requires it, although an employer may set a stricter rule.

Which Werner climbing harnesses also have hip D-rings?

The Blue Armor H162004, H163004 and H262004, the LiteFit H361004 and H362004, and the ProForm F3 H062004 and H063004 carry back, hip and front rings.

What does SwitchPoint add to Werner climbing harnesses?

A deployment cord that a suspended worker pulls to move into a seated position while waiting for rescue.

How often should Werner climbing harnesses be inspected?

Before each use, plus an annual inspection by a competent person other than the user, as Werner directs.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder