Resources
Siding Brake Length, From 2 ft Trim Brakes to 14 ft 6 in Industrial Models, Matched to Trim, Vehicle, Weight and More
Trim piece lengths and one-pass bends, every size Van Mark and Alum-A-Pole build, weights and casting counts by size, stands and legs, and fitting a long brake on a truck or van rack.
Picking a siding brake length means balancing the longest trim piece you bend against the weight you can carry and the vehicle that hauls it, and Nation Wide Ladder helps crews strike that balance across Van Mark and Alum-A-Brake models. We cover short 2 and 4 foot brakes for returns and repairs, the common 6 and 8 foot sizes, 10 foot 6 inch brakes for full-length trim, 12 foot 6 inch and 14 foot 6 inch models, and the stands, legs and racks each size needs.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Matching Siding Brake Length to the Longest Trim Piece You Bend
On any siding brake, length and throat depth answer different questions. Throat depth sets how wide a piece the brake can fold, while length sets how long a piece it can bend in one pass. Any siding model shorter than the trim forces a second bend and a lap joint, so start from the longest fascia, rake or corner piece you form most weeks. Van Mark describes a 10 foot 6 inch model as long enough to bend most full-length trim in a single pass, and that size is a common choice for siding crews.
Van Mark builds its light-duty Mark I Series in six sizes, at 2 feet, 4 feet 6 inches, 6 feet 6 inches, 8 feet 6 inches, 10 feet 6 inches and 12 feet 6 inches, and its TrimMaster and Metal Master 20 lines in the same 2 foot to 12 foot 6 inch span. Its industrial line runs from 6 feet 6 inches to 14 feet 6 inches for roofing panels. Alum-A-Pole keeps the choice simple, offering each Alum-A-Brake Ultima build at 5 feet 11 inches, 7 feet 10 inches and 10 feet 6 inches. Short brakes still earn a place for sills, returns and repair pieces, and some siding crews keep a short model in the van beside a long one for that reason. The Van Mark siding brakes and Alum-A-Pole siding brakes pages list every model.
Our team helps you select a siding brake length by checking your longest trim pieces against each size before you order.
Weight, Castings and Handles at Each Siding Brake Size
Every extra foot of length adds castings and pounds. Van Mark’s light-duty model goes from two castings and 32 pounds at 2 feet to three castings and 83 pounds at 6 feet 6 inches, then five castings and 120 pounds at 10 feet 6 inches and six castings and 153 pounds at 12 feet 6 inches, where dual bending and locking handles are added. The TrimMaster weighs 123 pounds at 10 feet 6 inches and 159 pounds at 12 feet 6 inches.
Heavier grades climb faster. The Van Mark Metal Master 20 weighs 52 pounds at 2 feet and 194 pounds at 12 feet 6 inches, while the Industrial Metal Master runs from 217 pounds at 6 feet 6 inches to 385 pounds at 14 feet 6 inches, a two-person lift. On the Alum-A-Brake side, the QS weighs 70, 94 and 123 pounds across its three sizes and the fully equipped QMS 93, 124 and 162 pounds. Measure the van floor, trailer or rack before choosing a length, because siding equipment that bends a full piece is no help if it will not ride to the house.
We install truck racks and van racks as well as selling them, so we can size the rack and the siding brake length together for the vehicle that will carry it.
Stands, Legs and Setup That Change With Siding Brake Size
A long siding model needs a support that keeps it straight from end to end. Van Mark sizes its stands to the throat, listing the USA1EZ, USA1 and UNL1 stands, 3002 folding legs and the 3004 wheel kit for its 14 inch brakes, and the USA2EZ, USA2 and UNL2 stands with the 3035 wheel kit for the Metal Master 20, while the industrial models ship with the Master Stand EZ. Alum-A-Pole’s tool-free APLEG legs fit any Ultima Q model and keep it level, and its wheel kit comes off in seconds and rolls over grass.
Set any long siding unit on level ground so the frame does not twist, and support wide or long stock as it feeds in. A coil holder designed for 24 by 50 inch rolls, such as the one that mounts to the Alum-A-Brake Ultima, keeps the roll square to the jaws at any size, and measuring arms or a gauge make repeat bends faster on a longer bed.
Free in-person consultations at our Windham, NH and Worcester, MA showrooms let you see a short and a long brake set up before you settle on a size.
Siding Brake Length and the Rest of the Trim Station
Siding brake length shapes the whole trim station, from the coil holder and cutter beside it to the staging it sits under and the rack that hauls it. A longer siding model usually means a longer rack and a bigger vehicle, so it pays to plan them as one purchase.
To compare the rack, ladder and staging makers that complete that setup, visit our ladder and truck equipment brands hub.
Choosing a Siding Brake Length With Our Team
Nation Wide Ladder has supplied siding contractors for over 50 years, and we quote by siding brake length, matching the size you choose to your longest trim, your crew’s carrying limit and the van or truck that brings it to each job.
Siding Brake Length FAQs
What siding brake length do most crews use?
A 10 foot 6 inch brake is a common choice because Van Mark describes it as long enough to bend most full-length trim in one pass.
What is the shortest siding brake made?
Van Mark makes 2 foot models in its light-duty, TrimMaster and Metal Master 20 lines. The shortest Alum-A-Brake is 5 feet 11 inches.
What is the longest siding brake length available?
The Van Mark Industrial Metal Master 20 EZ reaches 14 feet 6 inches. The Alum-A-Brake tops out at 10 feet 6 inches.
How heavy is a 10 foot 6 inch siding brake?
Van Mark lists 120 pounds for the light-duty model and 123 for the TrimMaster, and Alum-A-Pole lists 123 pounds for the QS and 162 for the QMS.
Does a longer siding brake need a different stand?
Stands follow throat depth rather than length on Van Mark siding models, while the industrial models ship with their own stand. Alum-A-Pole's APLEG legs fit any Ultima Q brake.
Is throat depth the same as siding brake length?
No. Length sets how long a piece you can bend in one pass, and throat depth sets how wide a piece the tool can reach into.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.








