Alum-A-Pole range

Alum-A-Pole Siding Brakes, With Ultima QS, QCS and QMS Builds, a Coil Holder, Legs, Wheel Kit and More

Alum-A-Brake portable bending for trim coil, vinyl and light flashing, with a 19.5 inch throat, published capacities by metal, three lengths and upgrade parts for cutting and measuring.

Waiting on shop-formed trim slows a siding crew, and Nation Wide Ladder answers that with Alum-A-Pole siding brakes, matched to your trim work by our team and delivered across New England. The Alum-A-Brake Ultima Q series comes in QS, QCS and QMS builds, and we carry the APBRAKE-QMS with the APCH coil holder, APLEG legs and APWH wheel kit that turn it into a portable trim station.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Alum-A-Pole Siding Brakes Do for Trim and Exterior Crews

Portable siding brakes clamp sheet stock along a straight edge and fold it to the angle you set, which is how installers produce window and door wraps, fascia covers, corner trim and flashing that match the job exactly. Alum-A-Pole siding brakes, sold under the Alum-A-Brake name since 2004, are made for trim coil and similar light stock. Siding contractors, remodelers and trim specialists get the most from them, particularly when a job calls for colors or profiles that are not sold preformed.

Alum-A-Pole lists window wraps, fascia, rooflines and soffits among the jobs its siding brakes are built for, and its capacity chart includes the company’s own Pro-Trim vinyl coil, so a crew can bend a sill or casing wrap from one length of coil rather than cutting preformed pieces to fit. The Alum-A-Pole wheel kit and tool-free legs let the brake follow the crew from one elevation to the next as the scaffold moves, and the cutting and measuring upgrades on the QCS and QMS let one person cut coil to width, set a repeat dimension and bend without pencil marks. Heavier flat stock, such as roofing panels, belongs on a heavier machine.

Tell us what trim your crew bends most and in which materials, and our team will check it against the Alum-A-Pole ratings before you order.

Alum-A-Pole APBRAKE-QMS Series – Ultima Brake

Alum-A-Pole Ultima Q Siding Brakes and the Accessories We Carry

Alum-A-Pole builds the Ultima Q series in three versions, each offered in 10 ft 6 in, 7 ft 10 in and 5 ft 11 in lengths. The Ultima QS is the quick setup model, a standard bending brake with two fold-up bending handles. The Ultima QCS adds the Qcut system, with a track-mounted Quick Cutter, a cutter guide bar and a cutter stop. The Ultima QMS adds the QMeasure system to that cutter package, with two measuring arms, four Maximizers, a full-size removable table and, on the 10 ft 6 in model, three bending handles.

The APBRAKE-QMS Ultima brake is the Alum-A-Pole version we stock, suited to crews who want cutting and measuring built in from the start. Around it, the Alum-A-Pole APCH coil holder mounts to the brake or the legs, has a built-in track-mounted slitter and is designed for 24 by 50 inch rolls. APLEG legs fit any Q series brake or coil holder, install without tools and keep the brake level, and the APWH wheel kit comes off in seconds and rolls over grass.

Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can talk through the Alum-A-Pole QMS and its accessories with our team.

Alum-A-Pole APCH – Coil Holder

Capacities, Throat Depth and Construction of Alum-A-Pole Brakes

Alum-A-Pole lists the same bending capacities for all three Ultima builds, rating them for 0.024 inch aluminum coil, 0.035 inch vinyl coil, 28 gauge soft steel and 16 ounce copper, with a 19.5 inch throat depth across the line. Frames are anodized aluminum with ribbed castings, the jaw cover edge is replaceable hardened stainless steel, and the bending hinge edge is a replaceable PVC strip. Power Lock snap clamping holds the stock in place, and Alum-A-Pole states that its siding brakes are made in the USA. The anodized finish also keeps the brake from leaving oxidation stains on the coil, which can otherwise mean touch-ups on finished trim.

Weight varies with length and build. The QS runs 70 pounds at 5 ft 11 in, 94 pounds at 7 ft 10 in and 123 pounds at 10 ft 6 in. The QCS adds roughly 8 to 10 pounds for its cutter hardware, and the QMS weighs 93, 124 and 162 pounds across the same three sizes. Because the jaw cover and hinge edge are both replaceable, worn edges can be renewed instead of retiring the whole brake, and Alum-A-Pole publishes video guides for setup and use.

We have served contractors and homeowners for over 50 years, so when an edge wears down you can come back to the same team to quote the replacement Alum-A-Pole part.

Alum-A-Pole APLEG – Legs for Brake and Coil Holder

Alum-A-Pole Siding Brakes Working Beside Pump Jack Scaffolding

On a siding job the brake rarely works alone. Crews stage the wall on Alum-A-Pole pump jack scaffolding and bend wraps and drip edge on the ground nearby, and Alum-A-Pole introduced its siding brakes in 2004 to sit alongside those poles, so one maker supplies both halves of the exterior setup.

If you are comparing other manufacturers too, you will find each one we carry in our ladder and truck equipment brands hub.

Alum-A-Pole APWH – Wheel Kit

Choosing Alum-A-Pole Siding Brakes by Length, Build and Upgrades

Length is the first decision when choosing Alum-A-Pole siding brakes. A 10 ft 6 in brake handles full-length trim pieces in a single bend, while the 7 ft 10 in and 5 ft 11 in sizes are lighter to carry and fit smaller trucks. Next, check your materials against the published limits, since standard aluminum trim coil and vinyl coil sit within the Ultima ratings while steel heavier than 28 gauge calls for a brake rated beyond this line. Finally, decide how much you want built in. A crew that cuts every piece on site saves time with the QMS cutter and measuring arms.

Upgrades let a simpler brake grow with the crew. Qcut, the Qcut Stop and the Qcut Guide Bar can be added to a QS later, and the measuring arms, sold in pairs, need the guide bar in place to work. Maximizers come in sets of four and hold a set distance for repeat cuts and bends, stack finished pieces and keep the coil from dropping. Buying the QMS from the start puts all of that on the brake on day one, and setting it on APLEG legs keeps it level so long bends stay straight from end to end.

Our own trucks deliver door to door across New England, with weekly runs to Maine from New Hampshire, so a 162 pound QMS reaches the job without a trip to collect it.

Request Pricing on Alum-A-Pole Siding Brakes

Trim bent on site to the exact color and profile keeps a siding job moving, and we quote Alum-A-Pole siding brakes with the coil holder, legs and wheels that complete the station. Send your list through a quote request, see the Alum-A-Pole siding brake category in our store, or head back to the Alum-A-Pole brand page.

Alum-A-Pole Siding Brakes FAQs

What materials can Alum-A-Pole siding brakes bend?

Alum-A-Pole rates the Ultima Q series for 0.024 inch aluminum coil, 0.035 inch vinyl coil, 28 gauge soft steel and 16 ounce copper.

What is the throat depth of Alum-A-Pole siding brakes?

The company lists a 19.5 inch throat depth for the Alum-A-Brake line.

What is the difference between the Alum-A-Pole QS, QCS and QMS brakes?

The QS is the standard brake, the QCS adds a track-mounted Quick Cutter with guide bar and stop, and the QMS adds measuring arms, Maximizers and a removable table to the cutter package.

Which Alum-A-Pole siding brake do you stock?

We stock the APBRAKE-QMS Ultima brake, along with the APCH coil holder, APLEG legs and APWH wheel kit.

Can I add a cutter to Alum-A-Pole siding brakes later?

Yes. Qcut, the Qcut Stop and the Qcut Guide Bar can be added to a QS, and measuring arms, sold in pairs, work once the guide bar is fitted.

Do the Alum-A-Pole APLEG legs fit other siding brakes?

Alum-A-Pole says the legs fit any Q series Alum-A-Brake or its coil holder. Compatibility with other brands is not stated.

Need help choosing the right Alum-A-Pole equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder