Resources
Wall Jacks for Framing, Raising Sheathed Walls With 16, 20 and 23 Foot Telescoping Masts, Braces, Winches and More
Lift ranges and per-mast ratings, how many masts a heavy frame needs, holding the bottom plate on the deck, adjustable braces, replacement cables and winches, and the 6 foot fall rule on a deck edge.
Standing a long, sheathed wall with a small crew is where wall jacks for framing earn their keep, and Nation Wide Ladder supplies the Proctor masts, braces and spare parts that make a controlled lift possible. We cover the 16, 20 and 23 foot telescoping wall jacks, their lift ranges and per-mast ratings, adjustable wall braces, the cables, winches and brackets that wear, and the planning that keeps a raised wall on the deck.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What Wall Jacks Do for a Small Framing Crew
Framing a wall flat on the deck, at a comfortable working height, is faster and safer than building it standing, and many crews go further by sheathing it and hanging windows, trim, siding and soffit before it goes up. The catch is weight, since a finished wall is far heavier than a bare stud frame and more than a few people can tip by hand. Wall jacks solve that with telescoping steel masts set at intervals along the wall, each with a winch and cable that lift the top plate while the bottom plate pivots on the deck.
The idea is well proven. A 1994 Journal of Light Construction piece described a crew using two 16 foot Proctor wall jacks, each rated at 1,000 pounds, to raise walls and lift beams into place. Because the lift is winch operated, the operator stays in one spot and controls the climb, and the masts collapse for the drive to the next job. For wall framing on additions, garages and new homes, that means fewer hands on the lift and less strain on backs. Our Proctor wall jacks page lists the three sizes we carry.
We have served contractors and homeowners for over 50 years, and our team has seen framing crews shift toward raising finished walls with jacks rather than manpower.
Sizing Wall Jacks by Height, Weight and Mast Count
Each of the Proctor wall jacks has a listed lift range, which we read as the wall heights it handles. The PWJ-16 closes to 9 feet 6 inches, extends to 16 feet and covers 7 feet to 10 feet 6 inches, and Proctor rates it at 1,000 pounds per jack. The PWJ-20 closes to 11 feet 6 inches, extends to 20 feet and covers 8 feet to 13 feet 6 inches. The PWJ-23 closes to 12 feet 6 inches, extends to 23 feet and covers 9 feet to 15 feet 6 inches. The two taller jacks are rated at 500 pounds each, half the figure for the 16 footer.
Planning a lift is simple arithmetic. Total the weight of the frame with everything fastened to it, then add masts until their combined ratings stay above that figure, working them at least in pairs and spacing them along the wall so each carries its share. A tall gable or great-room wall that needs the 20 or 23 foot jacks therefore needs more of them than a standard 8 foot wall on PWJ-16s. Most single-storey framing starts with the 16 foot size.
Send us a list of your wall heights and lengths or call 603-434-6911 or 508-754-3030, and we will quote the jack size and count that suits that frame.
Bracing, Securing and Maintaining Wall Jacks Through the Lift
As a wall tips up, its center of gravity shifts, and Fine Homebuilding writers who use Proctor equipment stress securing the bottom plate so it cannot slide off the deck, with blocks scabbed to the rim joist or metal straps fastened to the plate. One contributor described an unsecured lift that slid off the foundation partway up and bent the poles so badly they would no longer telescope. Once the wall stands, adjustable braces hold it plumb until it is tied in. We stock braces that adjust from 10 feet 6 inches to 11 feet 6 inches, the cadmium plated Proctor PWB and our own zinc plated, powder coated NWWB.
The crew on the deck also faces the fall rule. OSHA 1926.501 requires guardrails, a safety net or personal fall arrest for residential construction work 6 feet or more above a lower level, so a second-floor deck edge needs one of those in place, such as Acro edge guardrails or Werner harnesses with a suitable anchor. Wear parts keep the jacks in service on framing jobs for years, and we carry 16, 20 and 23 foot cables with shackles, winches with handles, wall stops and lifting brackets.
Our own trucks deliver masts, braces and replacement cables door to door across New England, so a frayed cable can be swapped before the next framing lift.
Wall Jacks for Framing Within the Wider Build
Once the walls stand, the same crew moves on to sheathing gaps, trim and the roof, which brings in extension ladders for access and pump jack scaffolding for the wall faces.
For the ladder, staging and fall protection makers that follow the frame, browse our ladder and truck equipment brands hub.
Getting Wall Jacks for Framing Quoted by Our Team
Nation Wide Ladder quotes wall jacks for framing by mast size and count, with braces and spare cables, so a crew of two or three can stand a finished wall safely and keep the jacks working season after season.
Wall Jacks for Framing FAQs
How much can wall jacks for framing lift?
Proctor rates the PWJ-16 at 1,000 pounds per jack and the PWJ-20 and PWJ-23 at 500 pounds per jack, so heavier walls need more masts.
Which wall jack length fits a standard 8 foot wall?
The PWJ-16, with a listed lift range of 7 feet to 10 feet 6 inches, suits most single-storey walls.
How many wall jacks does a framing crew need?
Use them at least in pairs and add masts until their combined ratings exceed the weight of the wall with everything fastened to it.
How do you stop a wall sliding off the deck during a lift?
Secure the bottom plate with blocks scabbed to the rim joist or metal straps, as Fine Homebuilding writers recommend, before the lift starts.
Can wall jack parts be replaced?
Yes. We carry 16, 20 and 23 foot cables with shackles, winches with handles, wall stops, lifting brackets and shackles.
Do framing crews on a deck need fall protection?
OSHA 1926.501 requires guardrails, a net or personal fall arrest for residential construction work 6 feet or more above a lower level.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.








