Van Mark Siding Brakes & Accessories
Van Mark Light-Duty Brakes, the Mark I Series From 2 to 12 Feet 6 Inches, With Traditional Hinges, Cam Locks and More
The M2-S to M12-S models, their 14 inch throat and 3/4 inch auto-measuring hem, bending limits by metal, castings and weights, plus the stands and cutters that fit them.
Fascia wraps, window trim and corner caps go faster when they are bent at the house, and Van Mark light-duty brakes from the Mark I Series give siding crews and remodelers that ability, supplied across New England by Nation Wide Ladder. We list the Mark I Series in six lengths from the 2 foot M2-S to the 12 foot 6 inch M12-S, each with a 14 inch throat, a traditional hinge that auto-measures a 3/4 inch hem, the patented cam lock and AccuTrack rails for cutters and gauges.

- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Van Mark Light-Duty Brakes Are Built For
Van Mark introduced the original Mark I Series in 1983, and with it the cam-locking system that the company still builds into its brakes. The light-duty line is aimed at residential siding, window, door and trim work, mostly in aluminum trim coil, where a crew needs clean, repeatable bends without a heavy industrial machine, and where the brake often lives in a work van between jobs.
The key feature is the traditional hinge, which auto-measures a 3/4 inch bend and hem. That distance fits neatly over standard one-by lumber, so fascia and rake boards get covered without measuring every piece. Van Mark puts it simply, if you do not need bends smaller than 3/4 inch, the light-duty line is the right brake. If you need tighter pockets for vinyl siding or fiber cement, a POWERslot hinge model is the better match.
The 14 inch throat handles the typical residential trim piece, which Van Mark puts at about 8 inches wide, and suits crews who work mainly from 24 inch coil stock.
Our team will check the bends you make most and confirm whether Van Mark light-duty brakes or a pro-grade model suits that work, before you buy.
Van Mark Light-Duty Brakes by Length, Castings and Weight
Van Mark makes the light-duty line in six lengths, so the brake can be matched to the van or trailer that carries it, and casting count and weight rise with each step.
M2-S and M4-S. The 2 foot M2-S uses two castings and weighs 32 pounds, and the 4 foot 6 inch M4-S uses three and weighs 63 pounds. Both suit short returns, sills and repair pieces, and either rides easily in a work van.
M6-S and M8-S. At 6 feet 6 inches and 8 feet 6 inches, these use three and four castings and weigh 83 and 101 pounds, a common balance of reach and weight for trim crews working out of a cargo van.
M10-S and M12-S. The 10 foot 6 inch M10-S has five castings at 120 pounds and is long enough to bend most full length trim in a single pass. The 12 foot 6 inch M12-S has six castings, weighs 153 pounds and adds dual bending and locking handles.
Free in-person consultations at our Windham NH and Worcester MA showrooms let you judge each brake length against the truck or van that will carry it.
Bending Limits and Build of Van Mark Light-Duty Brakes
Van Mark rates its light-duty line for 0.027 inch aluminum in 3003-H14, 29 gauge galvanized, painted Grade D and 304L stainless steel, 24 ounce soft copper and 0.032 inch soft zinc. Those maximums assume standard metal properties, so Van Mark suggests calling the factory about anything outside them.
Each clamping station uses two aluminum castings, and two full base rail extrusions keep the brake from twisting under load. The patented cam lock pairs an aluminum cam with an ultra high molecular weight polyethylene wedge. A Power Lock bar clamps along the whole bending edge to avoid oil canning, and its 150 degree bending radius makes the second step of a 180 degree hem easier. Full loop handles with foam grips allow one-hand bending, and they release quickly for transport.
Van Mark states the current castings and pivot arms are 5 percent lighter and 10 percent stronger than the originals, and it backs the line with a one-year limited warranty.
Bring a sample of your coil to either location on a Saturday morning and our team can check it against these limits with you.
Stands, Cutters and Care for Van Mark Light-Duty Brakes
Stands are sold separately. Van Mark lists the USA1EZ, USA1 and UNL1 stands, the 3002 folding legs and the 3004 wheel kit for this 14 inch throat line. The AccuTrack rails on the Power Lock bar accept the TrimCutter, TrimFormer and Multi Gauge, and the QuickScore and free-standing Coil Dispenser also work with it.
For care, keep the clamping surfaces and vinyl wear strips clean so trim coil is not scratched, and wipe grit off the hinge after cutting. Van Mark builds with common off-the-shelf nuts, bolts and pull pins, and swapping in standard replacement hardware does not affect the warranty. Load the brake into the van or truck with the handles released and secured, so castings are not knocked out of line.
Keep the model and serial number handy for ordering wear parts, and check that the hinge moves freely through its full travel before the first bend of the day.
Our own trucks deliver door to door across New England, so a brake, stand and legs can arrive together at your shop.
Van Mark Brakes Within a Siding Crew Setup
A portable brake is one station in an exterior crew’s day, alongside staging, ladders and the truck or van rack that carries coil and the brake itself. Brake length has to suit the vehicle as well as the trim.
You will find every maker behind that setup in our ladder and truck equipment brands hub.
Get a Quote on Van Mark Light-Duty Brakes
Nation Wide Ladder has served contractors for over 50 years, and we quote Van Mark light-duty brakes with the stands and cutters each crew needs. See the Mark I Series listing, compare other Van Mark siding brakes and accessories and the Van Mark brand page, or browse our Van Mark store.
Van Mark Light-duty Brakes FAQs
What lengths do Van Mark light-duty brakes come in?
The Mark I Series comes in 2 foot, 4 foot 6 inch, 6 foot 6 inch, 8 foot 6 inch, 10 foot 6 inch and 12 foot 6 inch lengths, from the M2-S to the M12-S.
What hem does a Van Mark light-duty brake make?
Its traditional hinge auto-measures a 3/4 inch bend and hem, which fits over standard one-by lumber.
What can Van Mark light-duty brakes bend?
Van Mark rates them for 0.027 inch aluminum, 29 gauge galvanized, painted and stainless steel, 24 ounce soft copper and 0.032 inch soft zinc.
Do Van Mark light-duty brakes include a stand?
No. Stands such as the USA1EZ, USA1 and UNL1, the 3002 folding legs and the 3004 wheel kit are sold separately.
Does the TrimCutter fit Van Mark light-duty brakes?
Yes. The Power Lock bar carries AccuTrack rails for the TrimCutter, TrimFormer and Multi Gauge.
Need help choosing the right Van Mark equipment?
Talk to the team or send us your list and we will put a quote together.


