Van Mark range
Van Mark Siding Brakes, With Mark I, TrimMaster and Metal Master Lines, TrimCutter, Multi Gauge, Stands and More
Throat depths, hem sizes and published bending limits for four portable brake lines, plus the cutters, gauges, coil feeders, stands and tune-up kits that turn one into a trim station.
Bending trim and flashing to an exact profile at the house, rather than ordering it formed, keeps siding and roofing work on schedule, and Nation Wide Ladder makes that possible with Van Mark siding brakes, matched to your materials by our team and delivered across New England. We stock four Van Mark brake lines, the light-duty Mark I, the TrimMaster, the Metal Master 20 and the Industrial Metal Master 20 EZ, along with the TrimCutter, Multi Gauge, CD24 Coil Dispenser, UniStand stands, Trim-A-Table and tune-up kits.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Van Mark Siding Brakes Product Lines
Van Mark Mark I BrakesThe Van Mark Mark I Series, light-duty portable brakes from 2 to 12 feet 6 inches with a…
Van Mark Mark II TrimMasterThe Van Mark Mark II TrimMaster, a pro-grade 14 inch throat brake with a 5/8 inch POWERslot hem.
Van Mark Metal Master 20Van Mark Metal Master 20 brakes with 20 inch throats, in pro-grade MM and Industrial IM versions.
Van Mark Trim-A-TableThe Van Mark TAT60 Trim-A-Table siding saw table and its 3001 steel folding legs.
Van Mark TrimCutter and Coil DispenserThe Van Mark 3017 TrimCutter and CD24 Coil Dispenser for clean cuts and protected trim coil at the…
Who Relies on Van Mark Siding Brakes, From Trim Installers to Metal Roofers
Siding installers use a Van Mark brake for window and door wraps, corner covers and J-channel pockets. Gutter and trim specialists bend drip edge and fascia, while metal roofers and post frame builders form valley pans, rake trim and ridge caps from painted steel. Van Mark has made portable brakes since patenting the Trim-A-Brake in 1964, so its current range spans light trim work through industrial roofing, and the lighter models set up beside a truck or work van.
Van Mark sorts its brake lines by the work they are built for. Light-duty and pro-grade Van Mark siding brakes target residential trim around windows, doors, fascia and siding, mostly in soft aluminum coil. The industrial grade exists for metal roofing and architectural metal formed on site, which is why every industrial brake ships with a stand and platform built to take the strain. The 14 inch throat most siding crews use became the standard early on, and Van Mark notes that a typical residential trim piece is about 8 inches wide, well inside it.
Tell us what your crew bends most and from which coil, and our team will match a Van Mark grade and throat to that siding work.
Van Mark Siding Brake Lines We Stock, From Light Duty to Industrial
- Mark I Series. Light duty, with a 14 inch throat and a traditional hinge that sets a 3/4 inch hem for classic J-channel pockets, in sizes from the M2-S to the M12-S.
- TrimMaster (TM series). The pro-grade line, with a 14 inch throat and the POWERslot hinge, which sets a 5/8 inch hem for tighter pockets, from the TM2-S to the TM12-S.
- Metal Master 20 (MM series). A 20 inch throat for wide trim and soffit, built on the newer, lighter Van Mark castings, from the MM260 to the MM1260.
- Industrial Metal Master 20 EZ (IM series). Built for metal roofing and metal building work and sold with the Master Stand EZ, from the 6 ft 6 in IM665 to the 14 ft 6 in IM1465.
The three lighter lines run from 2 ft to 12 ft 6 in. A 10 ft 6 in brake bends a full-length trim piece in one pass, but weight rises with length and grade, so a 10 ft 6 in TrimMaster weighs 123 pounds, the matching Metal Master 148 and the Industrial Metal Master 259.
Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, so you can weigh each Van Mark length against the truck or van it will ride in with our team.
Van Mark Accessories That Turn Siding Brakes Into a Trim Station
- TrimCutter 3017. Rides the AccuTrack rails on four tracking wheels and cuts up to 24 gauge painted steel with case-hardened knives.
- Multi Gauge. A pair of protractor gauges that sit on the Power Lock hinge and show bend angle plus the 1.5 inch distance to the TrimCutter line.
- CD24 Coil Dispenser. A free-standing coil holder with two non-marring rollers and a quick-release tension roller that keeps coil from unraveling or catching the wind as it feeds in.
- UniStand Adjustable. Wheeled stands made in versions for 14 inch and 20 inch throat brakes.
- Trim-A-Table TAT60 and 3001 legs. A cutting table with a 6 ft saw track for on-site material cuts, plus its matching legs.
- Tune-up kits. Common wear parts packaged by brake model.
On cam-lock Van Mark siding brakes, the Power Lock bar carries the AccuTrack rails where the TrimCutter, TrimFormer and Multi Gauge mount, so a crew can cut and measure without moving the stock off the brake. The Coil Dispenser stands free, so it works beside most brakes, saw tables and slitters.
We have served contractors for over 50 years, and our team will help you put together the cutter, gauge and stand that suit the brake you run from your truck or van.
Van Mark Siding Brake Specifications and Bending Limits by Model
Van Mark publishes maximum thicknesses based on standard metal properties. The light-duty line and the Metal Master 20 are rated for 0.027 inch aluminum and the TrimMaster for 0.032 inch, with all three handling 29 gauge galvanized, painted and stainless steel and 24 oz soft copper. The Industrial Metal Master 20 EZ steps up to 0.050 inch aluminum, 20 gauge galvanized steel, 24 gauge painted and stainless steel and 36 oz soft copper.
The ratings refer to specific alloys and grades, so compare like with like, since Van Mark quotes aluminum as 3003-H14, painted steel as Grade D and stainless as 304L, and asks buyers to call the factory before bending anything outside standard properties. All four lines are cam-locking designs with an aluminum cam and UHMW polyethylene wedge, two castings per clamping station and a Power Lock bar with a 150 degree bending radius for 180 degree hems. Casting count rises with length, so a 10 ft 6 in light-duty or TrimMaster brake uses five castings while the stronger 20 inch casting lets a 10 ft 6 in Metal Master 20 manage with four. Each carries a one-year limited warranty and is made in the USA.
Both of our locations open Saturday mornings, so you can bring a sample of your coil in and check it against these Van Mark limits with us.
Van Mark Siding Brakes Within a Full Exterior Crew Setup
A brake is one station in a siding or roofing operation. Crews pair it with ladders or pump jack staging for the wall, and with truck or van racks that carry long coil and a brake up to 12 ft 6 in long between jobs, so the length you choose also has to fit the rack and the vehicle. The full Van Mark brand range shows how the brakes and tools fit together.
For the other makers behind that setup, you can explore our ladder and truck equipment brands hub.
Matching Van Mark Brakes With Stands, Cutters and Tune-Up Kits
Choose throat depth first, since stands are sized to it. Van Mark lists the USA1EZ, USA1 or UNL1 stand, 3002 folding legs or the 3004 wheel kit for the 14 inch light-duty and TrimMaster brakes, and the USA2EZ, USA2 or UNL2 stand and 3035 wheel kit for the 20 inch Metal Master 20, while the Industrial Metal Master already includes its stand. The TrimCutter and Multi Gauge fit current cam-locking Van Mark brakes, and Van Mark asks owners of older models to call and confirm fit. Hinge choice is the other pairing question, as the 3/4 inch traditional hinge hem covers fascia over one-by lumber while the POWERslot hinge forms the 5/8 inch pocket used with vinyl siding and fiber cement.
Vinyl strips, wedges, pull pins and springs wear with use, so tune-up kits bundle those parts by model, including kit 3157 for the TrimMaster, kit 3913 for the Metal Master 20 and kit 3914 for the Industrial Metal Master 20 EZ. Van Mark uses standard off-the-shelf fasteners, so replacing a nut or pull pin with standard hardware leaves the warranty intact. Keep the model and serial number handy when ordering parts.
Our own trucks deliver door to door across New England, with weekly runs to Maine from New Hampshire, so stands, kits and a brake can arrive together at your shop or job.
Get Pricing on Van Mark Siding Brakes and Accessories
Whether you bend aluminum siding trim or painted steel ridge caps, a brake matched to the metal and fitted with the right cutter and stand lets you form trim right at the truck or van, and we quote Van Mark siding brakes and their accessories to suit that work. Request pricing through a quote, browse the Van Mark siding brake and accessories category, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.
Van Mark Siding Brakes FAQs
Should I choose a 14 inch or 20 inch throat on Van Mark siding brakes?
A 14 inch throat, as on the Mark I and TrimMaster, suits typical trim and wraps. The 20 inch throat on the Metal Master 20 models reaches farther into wide pieces such as soffit and broad fascia.
Which hem do Van Mark siding brakes set?
The TrimMaster and Metal Master use the POWERslot hinge, which sets a 5/8 inch hem. The light-duty line uses a traditional hinge that sets a 3/4 inch hem.
Is a stand included with Van Mark siding brakes?
The Industrial Metal Master 20 EZ ships with the Master Stand EZ. Stands for the other lines are sold separately, including UniStand models for 14 inch and 20 inch throats.
What can the Van Mark TrimCutter cut?
Van Mark rates the TrimCutter for painted steel up to 24 gauge, using case-hardened tool steel knives guided on four tracking wheels.
Which of the Van Mark siding brakes handles the thickest aluminum?
The Industrial Metal Master 20 EZ, rated to 0.050 inch aluminum. Among the 14 inch models, the TrimMaster leads at 0.032 inch.
What warranty comes with Van Mark siding brakes?
Van Mark lists a one-year limited warranty on its brakes, which are made in the USA.
Need help choosing the right Van Mark equipment?
Talk to the team or send us your list and we will put a quote together.













