Alum-A-Pole Siding Brakes
Alum-A-Pole Ultima Brake, With QS, QCS and QMS Builds, Cutters, Measuring Arms, Legs, Coil Holders and More
Ultima bending capacities for aluminum, vinyl, steel and copper, the 10 ft 6 in QMS package, Alum-A-Pole weights and wear edges, and the stands and coil holders that make a portable trim station.
We quote the Alum-A-Pole Ultima brake for siding crews who would rather bend wraps, fascia covers and flashing to the exact color and size of the job than cut preformed trim to fit. Nation Wide Ladder lists the 10 ft 6 in Ultima QMS with its cutting and measuring hardware, and our team helps you weigh it against the simpler QS and QCS builds, then add the APLEG legs, coil holder and wheel kit that turn an Alum-A-Pole Ultima into a station you can move around the house.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Gets the Most From an Alum-A-Pole Ultima on Siding Jobs
Siding installers, remodelers and trim carpenters choose an Alum-A-Pole Ultima brake when a house needs custom pieces in a coil color or profile that nobody sells preformed. Window and door wraps, fascia, soffits and rooflines are the jobs Alum-A-Pole names for its Alum-A-Brake line, and each of them starts as a flat roll of coil that gets clamped and folded to a set angle.
An Alum-A-Pole Ultima suits crews who want that work done at the house rather than back at a shop. The anodized aluminum frame keeps it portable, the 10 ft 6 in length takes long fascia and casing runs in a single bend, and the QMS hardware lets one installer slit coil to width and repeat a dimension without marking each piece by hand. Someone residing a single garage may prefer one of the shorter brake lengths, which are lighter to lift onto a tailgate, while a crew working full elevations each week tends to want the long QMS. Steel heavier than 28 gauge sits outside the published Ultima ratings, so heavier sheet work calls for a bigger machine.
Tell us which trim pieces your crew bends most, and our team will match an Alum-A-Pole Ultima length and build to that work.
The Alum-A-Pole Ultima QMS We List and the QS and QCS Beside It
Alum-A-Pole builds the brake in three versions that share one frame and one capacity chart, so the choice comes down to how much cutting and measuring hardware rides on the Ultima brake. The QS is the quick setup version, a bending brake with two fold-up handles. The QCS adds the Qcut system, a Quick Cutter running in a track with a guide bar and a cutter stop, while the QMS adds QMeasure on top of that, with two measuring arms, four Maximizers and a full-size table that lifts off.
The brake we list is the APBRAKE-QMS-10-6, the QMS at 10 ft 6 in. Our listing describes a rigid aluminum worktable that comes off in about five seconds, the four Maximizers, a slitter guide bar with a built-in slitter in its track, and power locks that allow bends as small as a quarter inch, and it notes a lifetime warranty on wearable parts. At that length Alum-A-Pole fits the QMS with three bending handles, one more than the QS and QCS carry. The other Alum-A-Brake options sit on our Alum-A-Pole siding brakes overview.
If a QS or QCS suits your crew better, send us the length you want and we will quote that Alum-A-Pole Ultima next to the QMS.
Alum-A-Pole Ultima Capacities, Throat Depth, Weights and Wear Edges
Alum-A-Pole publishes a single capacity chart for every Ultima, so the QMS bends the same stock as the QS. The limits are 0.024 inch aluminum coil, 0.035 inch vinyl coil, 28 gauge soft steel and 16 ounce copper, and the throat measures 19.5 inches, which sets how far in from the edge of a wide sheet a fold can sit.
Weight is where the builds part ways. At 10 ft 6 in an Alum-A-Pole Ultima weighs 123 pounds as a QS, 132 pounds as a QCS and 162 pounds as a QMS, and the 7 ft 10 in and 5 ft 11 in QMS come in at 124 and 93 pounds. Ribbed castings stiffen the anodized frame, Power Lock snap clamping holds the coil, and Alum-A-Pole states that the brake is made in the USA. Two edges take the wear, a hardened stainless steel jaw cover and a PVC bending hinge strip, and both are replaceable, so a tired edge becomes a parts order rather than a reason to replace the whole Ultima brake.
Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can talk through Ultima weights and wear parts with us before you order.
Setting Up an Alum-A-Pole Ultima on Legs, Wheels and a Coil Holder
A long brake folds a straight line only while its frame stays level, so most crews give the brake its own stand. The APLEG legs fit any Q series Alum-A-Brake or Q series coil holder, go on in seconds with no tools, add stability and keep the Ultima brake level. Alum-A-Pole describes its wheel kit as removable in seconds and friendly to grass, which lets the brake follow the crew from one elevation to the next as the work moves around the house.
The Q coil holder carries its own track-mounted Q-Cutter and mounts to the Alum-A-Brake table or to the legs, so coil feeds from the roll and gets slit to width at the brake. Upgrade parts let a simpler Ultima grow with the crew, because Alum-A-Pole sells the Qcut, Qcut Stop, Qcut Guide Bar, Maximizers, a worktable and measuring arms separately. The measuring arms come in pairs and need the guide bar in place, while Maximizers come in sets of four, so a QS bought today can reach most of the QMS layout later.
Our own trucks deliver door to door across New England, so a 162 pound Alum-A-Pole brake and its legs arrive at the job ready to set up.
Where an Alum-A-Pole Ultima Sits Within a Complete Exterior Setup
Bending trim is one half of an exterior job. The other half is getting the crew safely up the wall, usually on pump jack scaffolding or extension ladders, and the truck that carries all of it needs racks that can take a 10 ft 6 in brake and long poles. Planning the brake, the staging and the truck together means the brake has a place to ride between jobs.
When you want to see the other manufacturers that supply that staging and those racks, open our ladder and truck equipment brands hub.
Request a Quote on the Alum-A-Pole Ultima Brake
Custom trim bent at the house keeps a siding crew moving, and Nation Wide Ladder quotes the Alum-A-Pole Ultima brake with the legs, coil holder and wheels that complete it. Read more about the maker on our Alum-A-Pole brand page or browse the Alum-A-Pole range in our store.
Alum-A-Pole Ultima Brake FAQs
What can an Alum-A-Pole Ultima brake bend?
Alum-A-Pole rates every Ultima for 0.024 inch aluminum coil, 0.035 inch vinyl coil, 28 gauge soft steel and 16 ounce copper, with a 19.5 inch throat.
How does the Alum-A-Pole QMS differ from the QS?
The QS is the plain bending brake with two fold-up handles. The QMS adds a track-mounted Quick Cutter with guide bar and stop, two measuring arms, four Maximizers and a removable full-size table.
How heavy is the 10 ft 6 in Alum-A-Pole Ultima?
Alum-A-Pole lists 162 pounds for the 10 ft 6 in QMS, 132 pounds for the QCS and 123 pounds for the QS at that length.
Can a QS Ultima be upgraded later?
Yes. Alum-A-Pole sells the Qcut, Qcut Stop, Qcut Guide Bar, Maximizers, a worktable and measuring arms as upgrade parts, and the measuring arms need the guide bar fitted.
Do APLEG legs fit the Alum-A-Pole Ultima brake?
Our listing says the APLEG legs fit any Q series Alum-A-Brake or coil holder, install without tools and keep the brake level.
Which Alum-A-Pole brake parts wear out first?
The hardened stainless steel jaw cover edge and the PVC bending hinge edge take the wear, and Alum-A-Pole makes both replaceable.
Need help choosing the right Alum-A-Pole equipment?
Talk to the team or send us your list and we will put a quote together.






