Resources
Arc Flash Fall Protection, Harnesses, Twin Leg Lanyards and Retractables Built for Electric Arc Exposure and More
Why electric arc exposure changes the harness and connector choice, the OSHA 1910.269 arc test, ASTM F887, Kevlar and aramid webbing, dielectric hardware, inspection and care.
Arc flash fall protection is gear built for workers at height who could also be exposed to an electric arc, where ordinary webbing and hardware are not designed for the heat. Nation Wide Ladder helps utility, substation and industrial electrical crews choose Werner arc flash harnesses in standard and construction layouts, Kevlar twin leg lanyards and an aramid web self-retracting lifeline, matched to the arc hazard and the tie-off.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
How Arc Exposure Shapes Fall Protection for Electrical Crews
OSHA’s rule for electric power generation, transmission and distribution work starts with the hazard. The employer must assess the workplace to identify workers exposed to flames or electric arcs and make a reasonable estimate of the incident heat energy each one could face. Where that estimate exceeds 2.0 cal/cm², the worker needs protective clothing and equipment with an arc rating at least equal to it, and clothing that could melt onto the skin or keep burning is not allowed.
Fall protection comes under the same assessment. OSHA requires personal fall arrest equipment used by workers exposed to flames or electric arcs to be capable of passing a drop test after exposure to an electric arc with a heat energy of 40±5 cal/cm². The webbing, stitching and hardware all have to come through that arc and still catch a worker. Linemen, substation electricians, utility contractors, tree crews working near lines and plant electricians working near energized equipment are the usual buyers of arc flash gear.
Our team helps you select arc flash fall protection once your arc assessment tells us the hazard each worker faces at height.
Arc Flash Harnesses With Kevlar Webbing and Dielectric Hardware
Werner’s arc flash harnesses replace standard webbing and metal with materials chosen for arc exposure. The H914004 standard model uses Kevlar webbing, shoulder padding and dielectric hardware, and Werner lists it as meeting ASTM F887 for arc flash along with ANSI Z359.11 and the OSHA 1926 and 1910 requirements. It carries a single back D-ring for arc flash fall arrest. The harness is the base of the system, so its fall protection approvals and its arc performance both have to suit the job.
Crews who also position need more rings. The H934104 construction model adds hip D-rings and waist padding to the back D-ring, with the same Kevlar webbing and dielectric hardware. Both build in yellow handles at the seat that help a suspended worker reach the Gravity Override position, reducing the potential hazards of suspension trauma, which matters on a pole or structure where rescue can take time and the rescuer may face the same arc hazard on the way up to reach them. The wider Werner harness range covers the same layouts for crews without arc exposure.
Our showrooms in Windham NH and Worcester MA offer free consultations, so a crew lead can handle the arc flash harnesses and check fit before ordering.
Arc Flash Lanyards and Retractables for Every Tie-Off
The connector has to match the harness, since arc protection is only as good as its weakest part. Werner’s arc flash lanyards include the C911100 twin leg lanyard in Kevlar webbing with snap hooks, which Werner lists as meeting ASTM F887 for arc flash and ANSI Z359.13 along with the OSHA 1926 and 1910 requirements. Twin legs let a worker stay connected while moving between anchors on a structure. Standard fall protection still has a place on the same crew for workers with no arc exposure, and keeping the arc flash gear clearly apart on the truck means no one grabs a standard lanyard for energized work.
Where a retractable suits the job better, the Werner R290006 AutoCoil 2 is a 6 foot arc flash SRL with 3/4 inch aramid webbing, built to meet ASTM F887 and ANSI Z359.14, in an impact resistant aluminum housing with a swivel top. Its impact indicator shows through the web stitch, and recessed labels and ID tags keep the inspection details with the unit. Werner lists it among its AutoCoil SRLs, and we confirm the current model with Werner before quoting. Inspect arc flash fall protection before each use, and retire any part that has arrested a fall or shows arc damage.
Send us a list of crew sizes, tie-off points and arc ratings, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote arc flash harnesses and connectors to match.
Arc Flash Gear Beside Ladders and Access Equipment
Electrical crews reach the work by ladder, bucket or structure, and the access gear around an arc hazard deserves the same care as the fall protection itself. Fiberglass ladders, nonconductive tools and the arc rated gear all come from different makers and have to fit one plan.
For the ladder and access makers around that plan, see them side by side in our ladder and truck equipment brands hub.
Equip Your Crew With Arc Flash Fall Protection
Over 50 years of supplying contractors has taught us that arc flash fall protection works when the harness, the connector and the arc rating all line up, and we check each piece with you, harness by harness and connector by connector, across the Werner lanyards and harness ranges.
Arc Flash Fall Protection FAQs
What does OSHA require of arc flash fall protection?
Under 1910.269, fall arrest equipment for workers exposed to flames or electric arcs must pass a drop test after exposure to an electric arc with a heat energy of 40±5 cal/cm².
Which standard covers arc flash webbing?
Werner lists its arc flash harnesses, twin leg lanyard and AutoCoil 2 arc SRL as meeting ASTM F887 for arc flash.
What are Werner arc flash harnesses made from?
Kevlar webbing with dielectric hardware and shoulder padding, plus waist padding on the H934104 construction model.
Is there an arc flash SRL?
Werner's R290006 AutoCoil 2 is a 6 foot arc flash SRL with 3/4 inch aramid webbing and an aluminum housing. We confirm the current model with Werner before quoting.
Can I mix arc flash and standard fall protection gear?
Arc protection depends on every part of the system, so the harness and the connector should both be rated for arc exposure where the hazard exists.
When does a worker need arc rated gear?
OSHA requires arc rated protection when the estimated incident heat energy exceeds 2.0 cal/cm², based on the employer's assessment.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.






