Resources
SRL Length, Choosing Between 6 ft and 11 ft Self-Retracting Lifelines for Reach, Weight, Class and More
What a longer line adds and what it does not, working radius and swing, the 6 ft Bantam against the 11 ft Max Patrol and Baseline, weight, capacity and foot-level options.
SRL length decides how far a worker can move from one anchor, and the common question is whether a compact 6 ft unit or an 11 ft unit suits the job. Nation Wide Ladder helps crews weigh the two across Werner Bantam 6 ft units in Class 1 and Class 2 builds, twin leg Bantams, and 11 ft Max Patrol and Baseline units, matching the SRL length to the anchor and the work area.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What SRL Length Changes on the Job and What It Does Not
Line length sets the working circle around the anchor. A 6 ft unit keeps the worker close, while 11 feet of line nearly doubles the reach before the line runs out, so a tech can circle a large machine or a roofer can cover a wider patch without moving the tie-off. What SRL length does not change, with the anchor overhead, is the arrest distance. Werner lists a 24 inch maximum arrest distance on its 6 ft Bantam and on its 11 ft Max Patrol and Baseline units alike. Weight on the harness does change with the unit, which matters to a worker who wears it all shift.
The catch is swing. The further a worker moves to the side of the anchor, the bigger the swing if they fall, so a longer line rewards an anchor placed close to overhead of the main work. When an SRL length falls short, Werner says to choose a longer SRL and never to clip a lanyard onto it for reach. Both of the 11 ft families and the standard Bantam are Class 1 devices, for anchorage at or above the back D-ring.
Our team helps you select an SRL length from the distance each worker travels from the anchor, so no one is stretching a line or carrying spare, and we check hook style against the anchor at the same time.
When a 6 ft SRL Length Suits the Work
Short lines suit workers who stay near one anchor, such as a fitter on a beam or a tech in a lift basket. Werner’s Bantam R430006 is the compact choice at this SRL length, at just over 2 pounds per unit so it can ride at the back without fatigue, with UHMWPE webbing and an average arrest force of 900 pounds. Bantams can also be combined into twin leg models for 100 percent tie-off, which suits ironworkers moving between beams, since one leg stays connected while the other moves.
The 6 ft range is also where foot-level work is covered. The R430006LE is a Class 2 SRL tested and approved over steel beam, precast concrete and B-deck, carrying a Kevlar and UHMWPE webbing blend, and attached overhead it keeps the 24 inch arrest distance. For a deck crew tying off at the feet, that SRL length is the place to start, and the Werner 6 ft SRLs collection gathers the hook and leg options.
Bring the job to a free consultation at our Windham NH or Worcester MA showroom and compare a 6 ft Bantam with an 11 ft unit in hand.
When an 11 ft SRL Length Is Worth the Extra Line
Mezzanines, large rooftop units and long equipment lines suit a longer line from one well-placed anchor, especially where moving the tie-off means climbing down and back up. Werner offers two families here. The Max Patrol R430011 carries 11 feet of high visibility UHMWPE and polyester webbing, protects workers up to 400 pounds and includes WebAlert, a brightly colored inner webbing that shows when the line is damaged. Its blue accent marks it for anchorage at or above the back D-ring.
The Baseline R530011XAC takes the same SRL length into a rugged aluminum housing that protects the internal brake, with UHMWPE and polyester webbing and a maximum arresting force of 900 pounds. Crews that value a metal housing tend to look at Baseline, while those who want the inspection aid of WebAlert lean toward Max Patrol. The Werner 11 ft SRLs collection sets both families side by side. On a mezzanine edge or a long equipment run, the longer SRL length means fewer anchor changes through the day, while the Class 1 rating still calls for the anchor at or above the back D-ring.
Our own trucks deliver door to door across New England, so a mixed order of 6 ft and 11 ft units reaches the yard together.
SRL Length Within the Wider Tie-Off Plan
Line length only works with an anchor in the right place and a route up to it, whether that is a ladder, staging or a lift. The anchor, harness and access gear around an SRL often come from different makers, so it pays to plan them together. A long line on a poorly placed anchor mostly adds swing, which is why anchor placement comes before SRL length.
When you want to weigh those access makers, our ladder and truck equipment brands hub lists them all in one place.
Pick the SRL Length That Fits Your Crew
Send us each worker’s working area, anchor height and hook needs, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote the SRL length that fits from the Werner self-retracting lifelines range.
SRL Length FAQs
Does a longer SRL length increase arrest distance?
Not when anchored overhead on these Werner units. Werner lists a 24 inch maximum arrest distance on both the 6 ft Bantam and the 11 ft Max Patrol and Baseline.
Which SRL length is lighter to wear?
The 6 ft Bantam, which Werner lists at just over 2 pounds per unit so it can be worn at the back without fatigue.
Is there an 11 ft SRL for foot-level tie-off?
The 11 ft Max Patrol and Baseline units here are Class 1, for anchorage at or above the back D-ring. Foot-level work calls for a Class 2 unit such as the 6 ft R430006LE.
What weight does the 11 ft Max Patrol cover?
Werner lists the R430011 Max Patrol as protecting workers up to 400 pounds.
Can I add a lanyard if my SRL length is too short?
No. Werner says never to attach a lanyard to an SRL. Choose a longer SRL instead.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.







