Werner Step Ladders
Werner 7300 Step Ladders in Type IAA Fiberglass, 3 to 12 Foot Heights, With PD7300-4C Platforms and More
Special duty 375 pound fiberglass stepladders, seven heights, a heavy aluminum top, internal spreaders, rail shields, the caster platform sibling and load math for heavy climbers.
Heavier climbers and crews that carry material up the ladder can run past a 300 pound rating, and Nation Wide Ladder answers that with Werner 7300 step ladders, a Type IAA fiberglass build rated for 375 pounds. We quote the 7300 in seven heights from 3 to 12 feet, along with the related PD7300-4C platform ladder on casters, and we help you size each Werner 7300 to the load and reach your crew needs.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Load Math for Werner 7300 Step Ladders
OSHA defines the maximum intended load as every worker, tool and material on the ladder at one time, and that total grows quickly. A crew member carrying a motor, a coil of cable or a box of parts adds all of it to their own weight. Type IAA, the special duty class Cal/OSHA sets at 375 pounds, gives that crew room a Type IA model may not.
The Werner 7300 series is that Type IAA option, built for crews whose loads sit close to or above the 300 pound line. Its fiberglass rails also meet OSHA’s call for nonconductive side rails wherever the worker or ladder could touch exposed energized equipment, which suits electricians, mechanical contractors, industrial maintenance teams and facility crews moving heavy parts. Cal/OSHA warns that water makes a ladder conductive, so wet rails lose that protection.
For a crew whose loads change day to day, sizing to the heaviest realistic case is safer than averaging, since OSHA bars loading a ladder past its rated capacity.
We place the Werner 7300 in our Master tier, the top of our Apprentice, Journeyman and Master ladder classes, for crews that want the heaviest-duty stepladder we list.
Werner 7300 Heights and Heavy-Duty Build
We list seven heights of the Werner 7300 series fiberglass stepladder, the 7303, 7304, 7305, 7306, 7308, 7310 and 7312, from 3 to 12 feet. Werner skips the 7, 9 and 11 foot sizes, so the range steps through 3, 4, 5, 6 and 8 feet before jumping to 10 and 12 feet for high ceilings and warehouse fixtures.
Werner builds the 7300 with a heavy-duty aluminum top and thick side plates, slip-resistant steps with wide knee braces and heavy-duty internal spreaders that sit inside the rails. A full set of rear horizontals stiffens the back section, a plastic external rail shield guards the rails against knocks, and slip-resistant foot pads grip the floor. The spreaders sit inside the rails rather than across the outside of the Werner frame.
The same 7300 designation appears on the Werner PD7300-4C platform ladder, a Type IAA podium on four casters for long sessions at one height. It comes in four sizes with reaches matching 4, 6, 8 and 9 foot stepladders, and adds a guardrail around an extra-large deck.
Saturday morning hours at both our locations let a crew collect a 7300 or a PD7300-4C without losing a weekday.
Using and Caring for Werner 7300 Step Ladders
Werner sets the highest standing level on a stepladder at two steps beneath the top cap, and OSHA bars standing on the top or top step. Pick the 7300 height that puts your work at chest level from that step. Cal/OSHA caps stepladders at 20 feet, so when the 12 foot model falls short, a platform or extension ladder is the next step rather than a taller stepladder. Open the ladder fully and confirm the internal spreaders lock, set it on stable, level ground, and climb facing the steps with one hand on the ladder. One person climbs at a time, since the rear horizontals are bracing rather than steps.
Before each use, Cal/OSHA asks for a check that the legs match in length, the spreaders lock correctly and the fiberglass shows no cracks, chips, splinters or heat or chemical damage. Store fiberglass out of sunlight and keep the steps free of oil and grease. Werner backs that routine with its own inspection form and safety videos and asks for a check before every climb. It supplies replacement labels, feet and spreaders for stepladders, and it recommends retiring a damaged ladder rather than repairing it.
Our team checks the 375 pound rating and height against the climbers and loads you describe, so each 7300 on the quote suits the job.
Werner 7300 Step Ladders Within a Heavy-Duty Crew Kit
A Werner 7300 often anchors a kit, and since a 12 foot stepladder needs a rack or shelving planned around its length, the vehicle belongs in that plan too. The kit also includes a lighter 6200 for routine work, a twin step for two-person jobs and extension ladders for exterior access, all part of Werner step ladders.
To match racks and van shelving from other makers to that kit, see our ladder and truck equipment brands hub.
Ordering Werner 7300 Step Ladders From Our Team
A 375 pound rating, seven heights to 12 feet and a caster platform sibling give heavy-duty crews a clear upgrade path from a 300 pound stepladder, without giving up fiberglass rails for electrical work. Send us the heights and loads, or call 603-434-6911 or 508-754-3030, and we will quote Werner 7300 step ladders for your crew, with the full Werner store range and the Werner brand page close at hand.
Werner 7300 Step Ladders FAQs
What are Werner 7300 step ladders rated for?
The 7300 series is rated Type IAA for 375 pounds, which covers the climber, tools and materials together.
What heights do Werner 7300 step ladders come in?
Seven heights, the 7303, 7304, 7305, 7306, 7308, 7310 and 7312, from 3 to 12 feet.
How does the Werner 7300 differ from the 6200?
The 7300 is rated Type IAA for 375 pounds with a heavy aluminum top and internal spreaders. The 6200 is rated Type IA for 300 pounds.
What is the Werner PD7300-4C?
A Type IAA fiberglass platform ladder on four casters, with reaches matching 4 to 9 foot stepladders.
Are Werner 7300 step ladders nonconductive?
The fiberglass rails meet OSHA's call for nonconductive side rails near exposed energized equipment. Keep them clean and dry.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.






