Werner Step Ladders

Werner Twin Step Ladders in the T6200 Fiberglass Series, Eight Heights From 2 to 12 Feet for Two Climbers and More

Steps on both sides for one or two users, 300 pounds rated on each side, fiberglass rails, internal spreaders, knee-braced riveted steps and the rules that change with a second climber.

Work around a fixture, a beam or a ceiling grid often needs a climber on each side, or a quick switch of sides without moving the ladder, and Nation Wide Ladder handles both with Werner twin step ladders, which have steps on the front and back. We quote the T6200 series in eight heights from 2 to 12 feet, rated Type IA for 300 pounds on each side, and we help you choose the Werner twin height and quantity for your crew.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Crews Choose Werner Twin Step Ladders

A single-sided stepladder has one climbing face, and OSHA bars climbing the rear cross-bracing unless the ladder has steps on both the front and rear sections. Cal/OSHA adds that only one person should be on a ladder at a time unless it is designed for more, naming double-sided ladders as the example. Werner’s own guidance matches, allowing two people on its twin step models.

That makes a Werner twin a natural fit for two installers lifting a light fixture or diffuser, a painter and helper working either side of a doorway, and electricians feeding wire across a ceiling. It also suits a single climber who wants to reach around an obstacle by switching sides rather than moving the ladder, a common need around ductwork, sprinkler pipe and suspended light fixtures.

Retail listings for the T6206 show fiberglass rails built to ANSI A14.5, which meets OSHA’s call for nonconductive side rails wherever the worker or ladder could touch exposed energized equipment. Cal/OSHA warns that a wet ladder conducts, so keep the rails dry.

Over 50 years of supplying trade crews has shown us how often two people end up sharing a ladder, and we help you plan enough Werner twin models to do that properly.

Werner T6200 Series – Type IA Twin Step Ladder

Werner T6200 Twin Heights, Ratings and Build

We list eight heights of the Werner T6200 twin step ladder, the T6202, T6203, T6204, T6205, T6206, T6208, T6210 and T6212, from 2 to 12 feet. Heights rise in one foot steps from 2 to 6 feet, then in two foot steps to 12, so there is no 7, 9 or 11 foot model. Werner rates both sides Type IA for 300 pounds, the extra heavy-duty class on the Cal/OSHA scale.

That rating is per side. OSHA counts all workers, tools and materials on the ladder at one time, so each climber and their gear should stay within 300 pounds on their own side. On the T6206, retail listings show six steps on each side. Werner builds the series with double-riveted slip-resistant steps that are knee-braced on both faces, heavy-duty internal spreaders and a molded plastic top and feet for strength.

Because a Werner twin has two climbing faces, both need the same care. Check the steps, braces and feet on each side, not only the side used most often, and keep labels on both faces legible, since OSHA requires them and Werner supplies replacements.

Our team checks heights and per-side loads against the jobs you list, so the Werner twin models on your quote suit one or two climbers.

Setting Up Werner Twin Step Ladders for Two Users

Open the ladder fully and confirm the internal spreaders are locked, set it on firm, level ground, and keep the area around both faces clear. Each climber should face the ladder, keep at least one hand on it while climbing and stay within their own side. Werner sets the highest standing level on a stepladder at two steps beneath the top, and OSHA bars standing on the top or top step on either face.

Plan the work so neither climber overreaches across the top toward the other side, and agree before climbing who holds a shared fixture and who fastens it, so nobody has to let go of the ladder to help. Cal/OSHA asks users to keep the body near the middle of the step and to climb down and move the ladder rather than lean. It also warns against straddling the front and back of a stepladder.

Before each use, Cal/OSHA asks for a check that the legs match in length, the spreaders lock and the fiberglass shows no cracks or heat damage. Werner supplies replacement labels, feet and spreaders for stepladders, and recommends retiring a damaged ladder rather than repairing it.

Our own trucks deliver door to door across New England, so a crew’s twin models can arrive at the job together.

Werner Twin Step Ladders in a Two-Person Crew Setup

Werner twin models usually work beside single-sided 6200s and heavier 7300s, all part of Werner step ladders, and the van shelving that carries them. A crew that shares ladders between two people needs fewer units overall, which frees space for other gear.

When you are fitting out the van as well, start with the makers in our ladder and truck equipment brands hub.

Quotes on Werner Twin Step Ladders for Your Crew

Eight heights, a 300 pound rating on each side and a fiberglass build give two-person crews a safer way to share one ladder on fixture, ceiling and doorway work. Send us the heights and quantities, or call 603-434-6911 or 508-754-3030, and we will quote Werner twin step ladders for your work, with the full Werner store range and our Werner brand page nearby.

Werner Twin Step Ladders FAQs

Can two people use Werner twin step ladders at once?

Yes. Werner allows two people on its twin step models, one on each side, and Cal/OSHA names double-sided ladders as built for more than one user.

What are Werner twin step ladders rated for?

The T6200 is rated Type IA for 300 pounds on each side.

What heights do Werner twin step ladders come in?

Eight heights from 2 to 12 feet, the T6202 through the T6212.

Can I climb the back of a single-sided step ladder instead?

No. OSHA bars climbing rear cross-bracing unless the ladder has steps on both sides, which is what a twin provides.

Are Werner twin step ladders nonconductive?

Retail listings show fiberglass rails, which meet OSHA's call for nonconductive side rails near exposed energized equipment. Keep them clean and dry.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder