Werner Step Ladders

Werner 6 ft Step Ladders in Single-Sided, Heavy-Duty, Twin, Podium and Caster Platform Designs and More

Five 6 foot designs side by side, from the 300 pound 6206 and twin T6206 to the 375 pound 7306, the PD6206 podium and the rolling PD7306-4C, with ratings, tops and the climber each one suits.

Werner 6 ft step ladders cover a wide band of interior trade work, and the real decision is which of five Werner designs at that height fits the climber, the load and the floor. Nation Wide Ladder quotes all five, the 6206 single-sided model, the heavy-duty 7306, the T6206 twin step, the PD6206 podium and the PD7306-4C platform on casters, and we match the right one to each job.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Five Werner 6 ft Designs and the Duty Ratings Behind Them

At 6 ft Werner offers more designs than at most heights, which makes it a useful size for comparing how the lines differ. The single-sided 6206 and the T6206 twin step are both rated Type IA for 300 pounds. The Werner 7300 heavy-duty series steps up to Type IAA at 375 pounds in the 7306, and the PD7306-4C platform carries the same 375 pound rating on four casters. The PD6206 podium sits at 300 pounds with an enclosed deck. Weight barely separates the two single-sided models, since Werner lists the 6206 at 22 pounds and the 7306 at 22.5, while the twin and podium designs climb to 27 pounds for the T6206, 32.5 for the PD6206 and 42 for the PD7306-4C.

That spread matters because OSHA counts the climber, tools and material together against the rating. An electrician with a full belt and a light fixture can add up faster than expected, so the 7306 suits heavier climbers or crews carrying stock up the ladder, while the 6206 covers most single users. Werner gives the 6206 a multi-purpose top that takes its job buckets and holds magnetic tools on steel plates, and the 7306 a heavy aluminum top with thick side plates.

Our team checks each climber’s weight and gear against the 300 or 375 pound rating, so the Werner 6 ft model on your quote carries the real load.

Werner 7300 Series – Type IAA Fiberglass Step Ladder

One Climber, Two Climbers or a Podium Deck at 6 ft

Layout is the second decision. The Werner T6200 twin step has steps on both sides and a 300 pound rating on each, so the T6206 lets two workers share one ladder on either side of a fixture or doorway, which saves carrying a second 6 ft ladder into the room. Werner builds it with double-riveted slip-resistant steps, internal spreaders and knee-braced steps. A single-sided 6 ft ladder like the 6206 or 7306 is climbed from the front only.

For long stretches at one height, a podium changes the job. Our store lists the PD6206 with the same reach as an 8 foot stepladder, and Werner’s own listing titles it as a podium with a 12 foot reach height. Its LOCKTOP guardrail wraps the 4X Work Zone so the user can face any direction on the platform. The PD7306-4C adds a toe guard, full aluminum bracing and four casters for moving along a ceiling run, though OSHA bars moving a ladder with anyone on it.

At our Windham and Worcester showrooms you can stand on a twin step and a podium side by side before choosing your Werner 6 ft layout.

Werner 6200 Series – Type IA Single Sided Step Ladder

Standing Height, Spreaders and Rails on Werner 6 ft Ladders

Werner puts the highest safe standing level on a stepladder two steps under the top cap, and OSHA bars standing on the top or the top step. On a 6 ft model that leaves the climber well short of the label height, which is why some buyers pick the PD6206 when they need to stand higher on the same size. Plan the work so you are not reaching overhead or leaning out to the side, and move the ladder rather than stretching for the last foot of a run.

OSHA also requires a metal spreader or locking device to hold the ladder open, and it bars climbing the rear bracing unless the ladder has steps on both sides, which only the T6206 does. The 7306 carries heavy-duty internal spreaders, a plastic rail shield against damage and slip-resistant foot pads. Fiberglass rails meet OSHA’s call for nonconductive side rails near exposed energized equipment, though Werner and Cal/OSHA both warn that a wet or dirty ladder can still conduct.

Over 50 years of supplying homeowners and contractors has shown us how a 6 ft ladder gets used day to day, and we size each one with that in mind.

Werner PD6200 Series – Type IA Fiberglass Podium Ladders

Werner 6 ft Step Sizes Within a Wider Equipment Kit

A 6 foot stepladder rarely travels alone. Interior crews often carry a shorter stepladder for cabinets and a taller one for open ceilings, plus an extension ladder for the outside of the building and a van rack to move them. The 6 ft step ladders from every brand we carry sit side by side for comparison, and our full Werner step ladder range covers every height in each series.

When the van and its racks are part of the plan, you can line up other makers through our ladder and truck equipment brands hub.

Werner PD7300-4C Series – Type IAA Fiberglass Platform Ladders

Quotes on Werner 6 ft Step Ladders for Trade Crews

Five designs, two ratings and a podium option give every crew a fit at this height. Send us the climbers, loads and rooms, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we will quote Werner 6 ft step ladders with the Werner store range and our Werner brand page close at hand.

Werner 6 Ft Step Ladders FAQs

Which Werner 6 ft step ladders carry 375 pounds?

The 7306 and the PD7306-4C platform on casters are both rated Type IAA for 375 pounds. The 6206, T6206 and PD6206 ladders are rated Type IA for 300 pounds.

How high does the Werner PD6206 podium reach?

Our store lists the PD6206 with the same reach as an 8 foot stepladder, and Werner titles it as a podium with a 12 foot reach height.

Can two people use a Werner 6 ft twin step at once?

Yes. The T6206 has steps on both sides, each rated for 300 pounds, so one climber can work on each side.

Where can I stand on a Werner 6 ft stepladder?

Werner sets the highest standing level two steps under the top cap, and OSHA bars using the top or top step as a step.

Do Werner 6 ft step ladders suit electrical work?

The fiberglass rails meet OSHA's call for nonconductive side rails near exposed energized equipment, but keep them clean and dry, since a wet ladder can conduct.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder