Resources

Louisville or Werner Step Ladders, Compared on Ratings, Materials, Tool Tops, Twin, Cross-Step, Podium Designs and More

Fiberglass and aluminum series from Type I to Type IAA, Werner job-bucket tops against Louisville tool slots and pail shelves, twin heights to 16 ft, the Cross-Step, and podium and platform options.

Choosing between Louisville or Werner step ladders works best series by series, because both makers build Type IA and Type IAA fiberglass models and each has designs the other does not. Nation Wide Ladder carries both, and we help crews compare single-sided, twin, convertible Cross-Step, aluminum painter and podium or platform models before they order.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Werner and Louisville Step Lineups by Rating and Rail Material

In fiberglass, the two lineups mirror each other. Werner’s 6200 is a single-sided Type IA model from 2 to 12 ft, and its 7300 heavy-duty step ladders move to Type IAA at 375 pounds from 3 to 12 ft. Louisville pairs the Type IAA FS1300HD with the Type IA FS1500 and the Type IA L-3016 for lighter use. Fiberglass rails on all of these meet OSHA’s call for nonconductive side rails near exposed energized equipment. Both makers have long histories here, with Werner building ladders since the 1950s and Louisville building step and extension ladders since 1946.

Aluminum is where the ranges differ. The Werner step series we list are all fiberglass, while Louisville adds aluminum with the Type I AS2100 and Type IA AS3000 painter models and the Type IA AS1000 in 10 and 16 ft heights. Louisville lists a 6 ft AS2100 at 15 pounds against 20 to 22 pounds for its 6 ft fiberglass singles, a real saving for painters working away from wiring. See the full sets in our Werner step ladders and Louisville step ladders pages, and the painter models in Louisville aluminum step ladders.

We run regular weekly deliveries to Maine from New Hampshire, so crews there can mix Louisville or Werner step ladders on one order.

Werner 7300 Series Heavy-Duty Step Ladders

Tops, Twins and Convertible Designs Across Werner and Louisville Step Models

Tops show each maker’s thinking. Werner’s 6200 top takes its job buckets and has steel plates that hold magnetic bits, and the 7300 has a heavy aluminum top. Louisville’s FS1300HD has a metal top, the FS1500 a molded top with tool slots and a magnet, and Louisville offers a universal pail shelf it says fits all of its step ladders.

For two climbers, Werner’s T6200 twin is Type IA at 300 pounds per side from 2 to 12 ft, while Louisville’s FM1500 twin is Type IA from 3 to 12 ft and its FM1400HD is Type IAA up to 16 ft. Louisville also offers a design of its own, the patented Louisville Cross-Step ladders, which stand as a step and convert to a leaning ladder with a V-shaped top, finished in HiVis green. Louisville adds its SHOX impact absorption system and RaptorBoot feet to several fiberglass models. Werner sets the 7300 spreaders inside the rails, and both makers double-rivet the steps on several fiberglass series.

At our Windham NH and Worcester MA showrooms you can open both brands side by side and compare the tops and spreaders in person.

Louisville Cross-Step Ladders

Podium and Platform Choices From Werner and Louisville

For long stints at one height, both makers offer an enclosed platform. Werner’s podium ladders run from the Type IA PD6200, 2 to 12 ft, to the Type IAA PD7300-4C on casters, and each reaches as far as a step 2 ft taller. Louisville’s FXP1700 Pinnacle Pro is a Type IA platform from 2 to 12 ft with a 30 inch handrail, and its FCP1400 Cross Pinnacle is a Type IAA leaning platform. Casters help on long ceiling runs, though OSHA bars moving a ladder while anyone is on it.

Reach charts need a careful read. Werner publishes an average reach, 10 ft for a 6 ft step, while Louisville gives a 6 ft model a 45 inch top standing height and a maximum reach of 10 ft 5 in, both for a 5 foot 7 inch climber. The standing rules are the same either way, two steps under the top cap per Werner, and OSHA bars the top or top step. Neither maker recommends repairing a damaged ladder, though both sell parts such as labels and shoes. Werner runs ladder safety courses, including Ladder Safety 101, and Louisville’s free C.L.I.M.B. Academy covers selecting, inspecting and setting up a step, with a printable certificate.

Both of our locations open on Saturday mornings, so a crew can compare a Werner podium with a Louisville platform before a Monday start.

Werner Podium Ladders (PD6200, PD7300)

Werner and Louisville Ladders on One Interior Crew

Plenty of crews run a Louisville aluminum painter’s step beside a Werner fiberglass single and a podium, choosing each by job rather than by brand. Picking by series also keeps each ladder rated for the person who climbs it most, whether that is a painter carrying a pail or an electrician with a loaded belt. Van shelving, racks and storage then come from other makers.

When you plan the van around that mix, start with the makers in our ladder and truck equipment brands hub.

Quotes on Louisville or Werner Step Ladders

Fiberglass singles and twins come from both, aluminum painter models and the Cross-Step come from Louisville, and caster podiums come from Werner. Send us your heights and ratings or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Louisville or Werner step ladders side by side, delivered by our own trucks across New England.

Louisville or Werner Step Ladders FAQs

Which brand makes aluminum step models?

Among the series we list, Louisville, with the Type I AS2100, Type IA AS3000 and Type IA AS1000. The Werner step series we carry are fiberglass.

Which Louisville or Werner step models are Type IAA?

Werner's 7300 and Louisville's FS1300HD, FM1400HD twin and FXS1400HD Cross-Step are rated Type IAA at 375 pounds.

How do Werner and Louisville twin models compare?

Werner's T6200 is Type IA at 300 pounds per side from 2 to 12 ft. Louisville's FM1500 is Type IA from 3 to 12 ft and its FM1400HD is Type IAA up to 16 ft.

What is the Louisville Cross-Step?

A patented design that stands as a step and converts to a leaning ladder with a V-shaped top for walls, corners and poles.

Do Werner and Louisville publish the same reach figures?

No. Werner gives an average reach and Louisville a maximum reach, both based on a 5 foot 7 inch person with 12 inches of reach.

Do both brands offer a podium or platform?

Yes. Werner has the PD6200 podium and PD7300-4C caster platform, and Louisville has the FXP1700 Pinnacle Pro and FCP1400 Cross Pinnacle.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder