Werner Specialty Ladders

Werner Podium Ladders in PD6200 Fiberglass and PD7300-4C Caster Platform Models, 2 to 12 Foot Heights and More

Enclosed standing platforms with wraparound guardrails, Type IA and Type IAA ratings, reach equal to a step ladder two feet taller, caster mobility and rules for turning on the deck.

Ceiling grid, sprinkler, lighting and finish crews who stand at one height for hours need more footing than a step ladder gives, and Nation Wide Ladder meets that need with Werner podium ladders, built around a large platform wrapped by a guardrail. We quote the fixed-base PD6200 series from 2 to 12 feet and the PD7300-4C series on four casters, and we size each Werner podium to the reach and floor your crew works on.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Interior Crews Choose Werner Podium Ladders

A step ladder puts the climber on a narrow step with the top cap off limits, which is tiring through a long day of fixture or ceiling work and invites reaching to the side instead of climbing down to move the ladder. A podium swaps that for an enclosed deck. Werner describes its podiums as easier to move than scaffolding or a lift for work at a fixed height, and both series use a 4X Work Zone, which lets the user face any direction while standing on the platform.

Electricians fitting out a ceiling, sprinkler fitters, drywall finishers, painters and facility teams are the usual buyers. Fiberglass rails on both Werner series meet OSHA’s call for nonconductive side rails where the worker or ladder could touch exposed energized equipment, which suits electrical fit-out. Werner’s guidance on turning matters here, since the user may turn around on the platform itself but must face the ladder on the steps, the same rule OSHA sets for climbing.

Our team helps you decide whether a fixed base or casters suits the floors your crew covers, and which reach heights to order for each room.

Werner PD6200 Series – Type IA Fiberglass Podium Ladders

Werner PD6200 and PD7300-4C Podium Series Compared

The Werner PD6200 fiberglass podium is the wider range, from the PD6202 at 2 feet to the PD6212 at 12 feet, with the PD6203 through PD6208 and the PD6210 in between. Each size reaches as far as a step ladder two feet taller, so the PD6206 works like an 8 foot step ladder. Werner rates the series Type IA for 300 pounds and builds it with double-riveted Traction-Tred steps, back-up plates on every top connector, rear horizontals spaced one per foot and knee braces on every step, details that suit a crew climbing on and off a Werner podium dozens of times a shift.

The Werner PD7300-4C platform ladder moves up to Type IAA at 375 pounds and rolls on four casters. Werner offers the PD7302-4C, PD7304-4C, PD7306-4C and PD7307-4C, reaching as far as 4, 6, 8 and 9 foot step ladders. It adds an extra-large platform with a toe guard, full aluminum bracing and a full set of rear horizontals.

Both share Werner’s LOCKTOP guardrail, which wraps the work zone, gives an extra point of contact and holds tools, and EDGE360 protection at the foot, an integrated rail shield with EDGE bracing and oversized pads.

We run regular weekly deliveries to Maine from New Hampshire, so crews there can add a Werner podium to an order without a separate trip.

Werner PD7300-4C Series – Type IAA Fiberglass Platform Ladders

Sizing and Using Werner Podium Ladders Safely

Size a podium from the reach you need, not the platform height. Pick the model whose reach matches a step ladder two feet taller than its platform, then check that you can work without stretching over the guardrail. Where the job means many short moves along a ceiling run, the PD7300-4C casters save carrying, though OSHA bars moving, shifting or extending a ladder while anyone is on it, so climb down before rolling.

Load counts the same way as on any ladder. OSHA treats the maximum intended load as the worker, tools and materials together, so a fixture or box of fittings on the deck adds to the climber’s weight against the 300 or 375 pound rating. Set the base on a stable, level floor, keep the deck free of oil, grease, drywall dust and other slipping hazards as OSHA requires, keep the area around the foot clear, and barricade or guard the ladder if it stands in a doorway or passage. Before each use, Cal/OSHA asks for checks on rails, steps, hardware and feet, and on fiberglass for cracks, chips and heat or chemical damage.

At our Windham and Worcester showrooms you can climb a Werner podium and compare the decks in person.

Werner Podium Ladders in an Interior Fit-Out Fleet

A podium usually joins step ladders, a few extension ladders and the van shelving that carries them all. A Werner podium is bulkier than a folded step ladder, so plan van or trailer space for it early, and the rest of the special designs sit under Werner specialty ladders.

To compare van shelving and racks from other makers, start with our ladder and truck equipment brands hub.

Quotes on Werner Podium Ladders for Your Crew

Fixed-base fiberglass PD6200 models to 12 feet and caster-mounted PD7300-4C platforms give interior crews a steadier place to work at height, with a guardrail on every side of the deck. Send us the reach heights and quantities, or call 603-434-6911 or 508-754-3030, and we will quote Werner podium ladders for your crew, with the full Werner store range and our Werner brand page to round out the order.

Werner Podium Ladders FAQs

How high do Werner podium ladders reach?

Each model reaches as far as a step ladder two feet taller than its platform, so the PD6206 works like an 8 foot step ladder and the PD7307-4C like a 9 foot one.

What is the difference between the Werner PD6200 and PD7300-4C?

The PD6200 is a fixed-base Type IA podium from 2 to 12 feet. The PD7300-4C is a Type IAA platform ladder on four casters with reaches of 4 to 9 feet.

Can I turn around on Werner podium ladders?

Yes, on the platform itself. Werner says to face the ladder whenever you are on the steps.

Can I roll the Werner PD7300-4C with someone on it?

No. OSHA bars moving a ladder while it is occupied, so climb down before rolling it.

Are Werner podium ladders nonconductive?

Both series have fiberglass rails, which meet OSHA's call for nonconductive side rails near exposed energized equipment. Keep them clean and dry.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder