Louisville Step Ladders
Louisville Cross-Step Ladders That Convert from Stepladder to Leaning Ladder, FXS1400HD and FXS1500, 4 to 12 Feet
Patented two-in-one fiberglass ladders with a V-shaped ProTop for walls, corners and poles, compared on duty rating, tool features, weight and height, with setup and inspection points for each mode.
Louisville cross-step ladders solve the problem of hauling two ladders to one job, because each one stands on its own as a stepladder and converts to a leaning ladder that rests against a wall, corner or pole. Nation Wide Ladder carries both fiberglass Cross-Step series, the Type IAA FXS1400HD and the Type IA FXS1500, and our team helps you match the rating and height to the work.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What a Louisville Cross-Step Design Does on Site
Louisville calls the Cross-Step a patented two-in-one design. Opened, it works as a self-supporting stepladder. Folded and leaned, it becomes what Louisville calls a shelf or leaning ladder, and the V-shaped ProTop lets it sit securely against a flat wall, an inside or outside corner, a building face or a pole. Louisville says the leaning position also gets you closer to the work, which matters when a stepladder’s spread would keep you an arm’s length away.
That flexibility is why electrical, construction and residential crews take to it. Louisville points to those three trades directly, and the fiberglass rails are marked safe around electricity, so the same ladder can work beside a panel indoors and against a utility pole outside. One Cross-Step on the truck can stand in for both a stepladder and a short leaning ladder on many jobs.
The other giveaway is color. Louisville finishes the top and shoes of its Cross-Step ladders in a HiVis green that it says makes them easy to identify on a job site, which helps a safety lead confirm at a glance which ladders on site are the leaning type.
Our team helps you decide whether Louisville cross-step ladders or a standard model from our Louisville step ladder family suits your crew.
FXS1400HD Versus FXS1500 Louisville Cross-Step Models
The Louisville FXS1400HD is rated Type IAA for 375 pounds and adds double heavy duty reinforcements to the double riveted steps. The Louisville FXS1500 is rated Type IA for 300 pounds. We list both in 4, 6, 8, 10 and 12 foot sizes, so the height you need is available at either rating. Louisville states that every size in both series meets or exceeds ANSI and OSHA safety standards, and it offers businesses a free workplace assessment of how the Cross-Step could fit their sites.
Most features are shared. The ProTop carries a magnet tray, a hardware tray, drill and tool slots and a holder for pipe or a 2Ă—4. A locking latch secures the rear section when the ladder is leaned, internal spreader braces help prevent damage in transport, and Louisville’s SHOX system absorbs knocks that would otherwise reach the fiberglass rails. RaptorBoot feet carry a slip-resistant, non-marring bonded tread.
Weight and footprint are close. Louisville lists the 6 foot FXS1406HD at 23 pounds and the 6 foot FXS1506 at 21 pounds, each with six steps and a 36 inch open width, wider than a standard 6 foot fiberglass stepladder.
We place regular weekly deliveries to Maine from New Hampshire, so crews up north can add Cross-Step ladders to a standing order.
Setup, Load and Inspection for Louisville Cross-Step Ladders
Each mode has its own setup. As a stepladder, the spreaders lock fully open, and OSHA rules out standing on the top cap or the top step. As a leaning ladder, the rear section is latched and the V-shaped top goes firmly against the wall, corner or pole. Louisville builds its leaning designs with rubber bumpers on the top to protect the surface and a lock that secures the back legs in the leaning position.
The load rating does not change between modes. Louisville lists 375 pounds on the FXS1400HD and 300 pounds on the FXS1500, and OSHA’s ladder guidance counts the climber plus any tools or equipment against that figure and does not allow a ladder to be loaded past its rated maximum. Louisville gives a 6 foot model a top standing height of 45 inches and a maximum reach of 10 feet 5 inches for an average adult.
Louisville’s C.L.I.M.B. Academy training calls for checking every tread, side rail, locking mechanism and foot before each use, and on a Cross-Step that includes the rear latch and the spreaders. A ladder that fails is tagged and pulled from service. OSHA also wants periodic checks by a competent person, and the same free course covers selecting and setting up ladders for crews who want a refresher.
Saturday morning hours at both of our showrooms give your crew time to try the Cross-Step conversion in person before a fleet order.
Louisville Cross-Step Ladders in a Mixed Ladder Fleet
A two-in-one ladder trims the count on a truck but rarely replaces everything. Extension ladders still cover roof access and platforms still cover long standing work, and those often come from different makers with their own ratings and features.
Compare those makers yourself through our ladder and truck equipment brands hub.
Pricing Louisville Cross-Step Ladders for Your Trucks
The FXS1400HD covers heavy loads at Type IAA and the FXS1500 covers Type IA work, both from 4 to 12 feet with the same leaning ProTop, tool trays and HiVis green finish. Send us your sizes and quantities, and we will quote Louisville cross-step ladders for your crew. Browse them on our Louisville store page, or return to the Louisville Ladder hub page.
Louisville Cross-step Ladders FAQs
How do Louisville cross-step ladders convert?
Each one stands as a stepladder, then converts to a leaning ladder. The rear section latches and the V-shaped ProTop rests against a wall, corner, building or pole.
What is the difference between the FXS1400HD and FXS1500?
The FXS1400HD is rated Type IAA for 375 pounds with double heavy duty reinforcements. The FXS1500 is rated Type IA for 300 pounds. Both come in 4 to 12 foot sizes.
Why are Louisville cross-step ladders green?
Louisville uses a HiVis green top and shoes so the ladders are easy to identify on a job site.
Are Louisville cross-step ladders safe around electricity?
They have fiberglass rails, and Louisville marks them as safe around electricity.
What tool features does the cross-step ProTop have?
A magnet tray, a hardware tray, drill and tool slots and a holder for pipe or a 2Ă—4.
How much does a 6 foot Louisville cross-step ladder weigh?
Louisville lists the FXS1406HD at 23 pounds and the FXS1506 at 21 pounds.
Need help choosing the right Louisville Ladder equipment?
Talk to the team or send us your list and we will put a quote together.






