Louisville Ladder range

Louisville Step Ladders in Single Sided, Twin Front, Cross Step and Aluminum Painter Designs, from 2 to 16 Feet

Fiberglass and aluminum stepladders sorted by duty rating, top design and height, with the OSHA rules on top steps, spreaders and conductive rails that shape which one belongs on your site.

When you shop for Louisville step ladders, the range runs from a 2 foot fiberglass model to a 16 foot twin front ladder, so the real decision is duty rating, material and top design rather than height alone. Nation Wide Ladder helps contractors and homeowners make that call, and we carry Louisville fiberglass step ladders, twin step ladders, cross-step ladders and aluminum step ladders in Type IAA, Type IA and Type I ratings.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Louisville Step Ladders Product Lines

Who Reaches for Louisville Step Ladders and Why

A self-supporting ladder is the one piece of climbing gear nearly every trade carries, because it stands on its own wherever there is a floor. Electricians use one under a ceiling grid, painters walk one along a wall, and facility crews keep one on every floor of a building. Louisville Ladder has built them since the company started in Louisville, Kentucky in 1946, beginning with aluminum step and extension models before adding fiberglass.

The Louisville step ladders we list fall into ten series. Seven are fiberglass, which Louisville marks as safe around electricity, and three are aluminum, which Louisville marks as unsafe near live wiring but lighter to carry. A 6 foot Louisville FS1500 weighs 20 pounds, while a 6 foot aluminum AS2100 comes in at 15 pounds.

Height covers most interior work. Louisville rates a 6 foot model for a 45 inch top standing height and a maximum reach of 10 feet 5 inches, figured for a 5 foot 7 inch person reaching 12 inches overhead. Taller jobs move up to 8, 10 and 12 foot sizes, and the twin front FM1400HD goes to 16 feet.

Our team asks what you will be reaching and what is overhead before we suggest a Louisville step model, so the height and rail material suit the work.

Louisville FM1400 Series – Type IAA Fiberglass Twin Step Ladder

Fiberglass, Twin, Cross-Step and Aluminum Louisville Step Series

The single sided fiberglass group is the core of the range. Our Louisville fiberglass step ladders run from the metal top FS1300HD at Type IAA through the FS1500, with its tool slot top and magnet, to the L-3016, a straightforward Type IA ladder for occasional use.

Twin front models let two people climb at once, one on each side. We list two Louisville series, the FM1400HD at Type IAA and the FM1500 at Type IA, and our Louisville twin step ladders run from 3 to 16 feet.

The Cross Step is Louisville’s patented two-in-one design. It stands as a step ladder, then converts to a leaning ladder with a V-shaped top that rests against a wall, corner or pole, and the bright green top and shoes make it easy to spot on site. We list both Louisville cross-step ladders, the FXS1400HD and the FXS1500.

Aluminum covers painting and general work. The Louisville aluminum step ladders include the AS1000, plus the AS2100 and AS3000 with a molded pail shelf.

Our own Apprentice, Journeyman and Master ladder classes give you a second way to compare these Louisville step series, and we place the L-3016 in Apprentice and the FS1500 in Journeyman.

Louisville FS1300HD Series – Type IAA Fiberglass Step Ladder

Duty Ratings, Load Limits and Rail Material on a Louisville Step Ladder

Every Louisville step ladder carries an ANSI duty rating that sets the total weight it is built to hold, and OSHA counts your own weight plus any tools or equipment against it. Louisville lists Type IAA at 375 pounds, Type IA at 300 pounds and Type I at 250 pounds across the step series we carry. OSHA 1926.1053 says a ladder may not be loaded beyond the maximum intended load it was built for, so the rating is a hard limit, not a guide.

Rail material is the second check. OSHA requires nonconductive side rails wherever a worker or the ladder could contact exposed energized equipment, which is why electrical crews standardize on fiberglass. Louisville marks each fiberglass step model as safe around electricity and each aluminum one as unsafe, so the spec sheet answers that question quickly.

Construction details follow the rating. Heavier Louisville step ladders add heavy gauge steel hinges, gusset bracing under the steps and double riveted step joints, and several fiberglass models use the SHOX impact absorption system and RaptorBoot feet to protect the rails from knocks and wear.

Send us a list with the weight each climber carries and whether anyone works near live wiring, and we will quote Louisville step ladders rated for both.

Louisville FXS1400HD Series – Type IAA Fiberglass Cross-Step Ladder

Setting Up and Inspecting Louisville Step Equipment on the Job

OSHA sets a few rules that apply to every step ladder on a site. Each one needs a metal spreader or locking device to hold the sections open, the top cap and top step may not be used as a step, and the rear cross bracing is not for climbing unless steps are built into both sections, which is exactly what a twin front ladder provides. A crew that needs to stand higher should move up a size rather than step onto the top.

Inspection matters as much as setup. Louisville’s C.L.I.M.B. Academy training calls for checking every tread, side rail, locking mechanism and foot before each use, and OSHA wants periodic checks by a competent person. A ladder that fails gets tagged and taken out of service. Louisville sells replacement safety label kits and parts such as shoe kits, but it does not recommend repairing a damaged ladder beyond those kits.

The same free Louisville program also covers choosing, setting up and using ladders, with on-demand lessons and a printable certificate for those who complete it.

Our two showrooms, in Windham NH and Worcester MA, let your crew open and climb a Louisville step model before you commit to a fleet order.

Louisville AS1000 Series – Type IA Aluminum Step Ladder

Louisville Step Ladders Within a Wider Ladder Kit

Few crews run on one ladder type. A step ladder handles interior reach, an extension ladder handles the roofline, and a platform or tripod covers the awkward spots, often from different manufacturers on the same truck.

If you want to weigh Louisville against the other makers on our shelves, browse our ladder and truck equipment brands hub.

Louisville FCP1400 Series – Leaning Platform Ladder

Quotes on Louisville Step Ladders for Your Crew

From the metal top FS1300HD to the painter friendly AS2100, the choice comes down to rating, rail material and top design. Tell us the heights, loads and trades involved, call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Louisville step ladders to match. See the full lineup in our step ladders store section, or go back to our Louisville Ladder overview.

Louisville Step Ladders FAQs

Which Louisville step ladders are safe near electricity?

The fiberglass models. Louisville marks its fiberglass step ladders as safe around electricity and its aluminum step ladders as unsafe, and OSHA requires nonconductive side rails where a ladder could contact exposed energized equipment.

What duty ratings do Louisville step ladders come in?

The series we list are rated Type IAA at 375 pounds, Type IA at 300 pounds or Type I at 250 pounds. OSHA counts the climber plus any tools or equipment against the rating.

How high can I reach from a 6 foot Louisville step ladder?

Louisville gives a 45 inch top standing height and a maximum reach of 10 feet 5 inches, based on a 5 foot 7 inch person reaching 12 inches overhead.

Can two people use a Louisville twin step ladder at once?

Yes. Louisville designs its twin front step ladders so two users can work on the same ladder, one on each side, at the same time.

Can I add a pail shelf to a Louisville step ladder?

Louisville offers a universal pail shelf that it says fits all of its step ladders, and the AS2100 and AS3000 aluminum models come with a molded pail shelf built in.

Should I repair a damaged Louisville step ladder?

Louisville does not recommend repairs beyond its replacement kits, such as shoe and label kits. A damaged ladder should be tagged and taken out of service.

Need help choosing the right Louisville Ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder