Resources
Werner or Louisville Extension Ladders, Compared on Series, Ratings, Rung Locks, Shoes, Utility Fittings and More
Aluminum and fiberglass lineups from Type II to Type IAA, Werner rung locks and Alflo joints against Louisville MAXLOCK and QuickLatch, 60 ft three-section models, reach figures and parts support.
Comparing Werner or Louisville extension ladders is less about picking a winner than matching a series to the job, since both makers cover aluminum and fiberglass across most duty ratings. Nation Wide Ladder carries both, and we help crews compare two-section and three-section models, Werner's lightweight Aerolite utility series with cable hooks, and the locks, shoes and parts each brand uses.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Werner and Louisville Extension Lineups by Rail Material and Rating
Both makers span the duty scale in aluminum. Werner runs from the Type II D1200-2 and Type I D1300-2 to the Type IA D1500-2 and the D500-2, which is Type IAA from 20 to 32 ft and Type IA from 36 ft, with sizes to 48 ft. Louisville matches the lighter end with the Type II AE4200 and Type I AE3200, and offers Type IA in the AE2200 and AE1200. For very tall work, Werner’s 560-3 and Louisville’s AE1660 are both 60 ft three-section aluminum models rated Type I.
Fiberglass is where the lineups differ most. Among the series we list, Louisville offers one fiberglass extension, the Type IA FE3200 from 16 to 40 ft. Werner offers four, the Type IA D6200-2, the three-section D6200-3, the Type IAA D7100-2 and the Aerolite B7100-2, so a crew that wants Type IAA fiberglass will be looking at Werner. Weight follows the rail, with Louisville listing a 20 ft aluminum AE3220 at 32 pounds and a 20 ft fiberglass FE3220 at 42 pounds, a gap the Aerolite narrows on the Werner side. Compare the full sets in our Werner extension ladders and Louisville extension ladders pages, or go straight to Werner fiberglass extension ladders and Louisville aluminum extension ladders.
Our team matches rating, rail material and length to your crew first, then shows you the Werner and Louisville series that fit.
Locks, Rungs and Feet on Werner and Louisville Extension Models
Each maker has its own hardware. Werner uses spring-loaded extruded rung locks and joins rungs to rails with its Alflo rung joint, with 1.75 inch D-rungs on its aluminum series and 1.63 inch D-rungs on the D6200 and D7100 fiberglass series. On most Werner D-series two-section models, the base and fly separate so the base can work alone as a straight ladder.
Louisville uses its MAXLOCK rung lock, made from a patented polymer, and the patented QuickLatch system, which latches the fly and base together once the ladder is extended. Its D-shaped rungs give a flat, serrated foothold, and its swivel safety shoes work tread down or turned to the spike position, with a metal shield on the FE3200. Werner’s answer on rough ground is its PK80-2 and PK70-1 leg levelers, which fit many of its extension series.
Background shapes some of this. Werner traces its start to 1922 and developed its Alflo joint to stop rungs from twisting, while Louisville was founded in Louisville, Kentucky in 1946 and began with aluminum step and extension ladders. Both makers state that they build to ANSI and OSHA requirements, and both run ladder safety training, with Louisville’s free C.L.I.M.B. Academy on one side and Werner’s courses on the other.
At our Windham NH and Worcester MA showrooms you can work the locks and shoes on both brands side by side before ordering.
Reach Figures, Utility Fittings and Parts From Werner and Louisville
The two makers publish reach differently. Werner’s chart gives an average reach, such as 23 ft for a 24 ft ladder, while Louisville lists a maximum reach of 23 ft 8 in for its 24 ft models, both for a 5 foot 7 inch climber. Louisville also lists a maximum extended length, 17 ft for a 20 ft model and 48 ft for the AE1660, so compare like with like.
Utility crews will notice Werner’s fittings. The Aerolite B7100 extension ladders are Type IAA at about 25 percent less weight than a standard 375 pound ladder, the B7100-2X arrives with a cable hook and V-rung for strands and poles up to 10 inches, and the D7100-2 has pre-pierced holes for adding them later. On parts, Werner sells replacement labels, feet, ropes, pulleys and locks but not sections, Louisville sells rung lock, safety shoe and label kits, and neither recommends repairing a damaged ladder beyond those parts. A fleet that standardizes on Werner or Louisville extension ladders keeps its spare parts orders with one maker.
We install truck and van ladder racks, so a long Werner or Louisville extension can ride on a rack sized for it.
Werner and Louisville Ladders Among the Other Makers We Stock
Many fleets run both brands, choosing by series rather than by name. The Werner and Louisville brand pages show the step, specialty and accessory ranges behind each extension lineup.
For racks, staging and fall protection to go with them, compare the full set of makers in our ladder and truck equipment brands hub.
Quotes on Werner or Louisville Extension Ladders
Type IAA fiberglass and utility fittings point to Werner, while both brands cover aluminum from Type II to Type IA and 60 ft three-section work. Send us your lengths and ratings or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner or Louisville extension ladders side by side, delivered by our own trucks across New England.
Werner or Louisville Extension Ladders FAQs
Which brand has Type IAA fiberglass extension models?
Werner, with the D7100-2 and the Aerolite B7100-2. Louisville's fiberglass FE3200 is rated Type IA at 300 pounds.
Do Werner and Louisville both make 60 ft extension ladders?
Yes. Werner's 560-3 and Louisville's AE1660 are both three-section aluminum models rated Type I.
What is Louisville's QuickLatch?
A patented system that latches the fly and base sections together once the ladder is extended.
Why do Werner and Louisville reach figures differ?
Werner publishes an average reach and Louisville a maximum reach, both for a 5 foot 7 inch person with 12 inches of reach.
Which Werner extension models suit utility work?
The Aerolite B7100-2X comes with a cable hook and V-rung, and the D7100-2 has pre-pierced holes for adding them.
Can Werner or Louisville ladders be repaired?
Both sell replacement parts such as labels, shoes and locks, but neither recommends repairing a damaged ladder beyond those parts.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.






