Resources

Step or Multi-Position Ladder for Remodeling and Maintenance, Compared on Setups, Reach, Ratings, Levelers and More

Five MT setups against a dedicated folding step, reach heights from 13 to 26 ft, Type IA and IAA ratings, per-side loads in twin mode, the Cross-Step middle ground and joint checks.

Deciding on a step or multi-position ladder turns on how many different setups your work needs in a day. Nation Wide Ladder helps remodelers, painters and maintenance crews weigh the Werner MT multi-position series, with its twin step, stairway, extension, wall and scaffold-base modes, against single-sided and twin step models and Louisville's Cross-Step, which converts from step to leaning ladder.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What a Multi-Position Frame Replaces Compared With a Step Ladder

A remodeling van often carries a step, an extension and something short for stairs. Werner’s MT multi-position ladders fold those jobs into one frame that sets up as a twin step, a stairway step, an extension, a wall ladder or two scaffold bases for a plank. Stairway mode is the standout, because OSHA allows ladders only on stable, level surfaces unless they are secured, and a standard step cannot stand level on stairs.

A dedicated step does one job well. It opens in seconds, carries light and suits crews whose work is all interior ceilings and fixtures, which is why our Werner step ladders cover so many trades. Each multi-position mode needs its joints set and locked, so a crew that only ever needs a step spends extra time for versatility it rarely uses. Louisville’s Cross-Step ladders sit between the two, standing as a step and converting to a leaning ladder with a V-shaped top for walls, corners and poles. A multi-position frame earns its keep on mixed days, such as a stairwell in the morning and a gutter in the afternoon.

Over 50 years of supplying remodelers and homeowners lets us judge whether a multi-position frame or a plain step will carry most of your work.

Werner MT Multi-Position Ladders

Multi-Position Sizes and Ratings Against Werner Step Series

Werner names its MT models for reach height, the MT-13, MT-17, MT-22 and MT-26, and that reach already allows for the frame’s overlap. Every MT is rated Type IAA at 375 pounds, with 300 pounds on each side in twin step mode. Werner fits them with slip-resistant shoes and flared ends for a wider stance, double-riveted steps and curved rails, and lists the PK70-1 leg levelers for all four sizes. The AC18MT platform adds a flat deck in extension mode, rated for 300 pounds.

On the step side, Werner’s 6200 fiberglass step is Type IA at 300 pounds from 2 to 12 ft, the 7300 moves to Type IAA at 375 pounds, and the T6200 twin step ladders carry 300 pounds on each side for two climbers. Werner’s reach chart gives 10 ft for a 6 ft step and 12 ft for an 8 ft step, so compare those figures with the reach of the multi-position mode you will use most, and ask us to confirm the step-mode reach of an MT. Those step series have fiberglass rails, which meet OSHA’s nonconductive rule near energized equipment, so check the rail material of any multi-position frame before using it around power.

At our Windham NH and Worcester MA showrooms you can set an MT in each mode and open a step beside it before choosing a step or multi-position ladder.

Werner AC18MT Ladder Platform

Setup Checks for Multi-Position Joints and Step Mode Limits

Versatility brings more checks. OSHA requires every ladder to be used only for the purpose it was designed for, and Cal/OSHA says not to use a step as a single ladder or in a partly closed position, so set a multi-position frame only in the modes Werner designs. Cal/OSHA also asks that movable parts work without binding or excess play, which makes the hinges and locks the first thing to check at every change of mode. Never stand any frame on a scaffold platform, which Cal/OSHA rules out.

Standing limits follow the mode. In step modes, Werner sets the highest standing level two steps under the top cap, the same rule that applies to a folding step. In extension or wall mode, set the base 1 ft out for every 4 ft of height and stand no higher than four rungs from the top. OSHA bars moving or extending a ladder while anyone is on it, so climb down before changing setups. Werner runs ladder safety training, including its Ladder Safety 101 course on setup, selection and inspection, which suits new hires learning a multi-position frame.

Our own trucks deliver door to door across New England, so an MT and the steps that go with it arrive together.

Multi-Position and Step Choices for a Lean Van

Swapping several ladders for one multi-position frame frees rack and shelf space, while a crew that keeps dedicated steps needs shelf or rack room for each size it carries. Other special designs sit under Werner specialty ladders.

When the van layout changes as well, line up shelving and racks in our ladder and truck equipment brands hub.

Werner Specialty Ladders

Quotes on a Step or Multi-Position Ladder

Stairs, mixed setups and limited van space favor a multi-position frame, while steady interior work favors a dedicated step. Send us your jobs and heights, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote a step or multi-position ladder with the levelers and platform to match.

Step or Multi-position Ladder FAQs

How many setups does a multi-position frame have?

Werner's MT series sets up five ways, as a twin step, stairway step, extension ladder, wall ladder or two scaffold bases.

What are Werner multi-position models rated for?

Type IAA at 375 pounds, with 300 pounds on each side in twin step mode.

Can a step stand on stairs?

OSHA allows ladders only on stable, level surfaces unless secured. Werner's MT stairway mode is designed for stairs, and PK70-1 levelers fit all four MT sizes.

Which multi-position sizes are there?

The MT-13, MT-17, MT-22 and MT-26, named for their reach heights in feet.

Can I use a step as a leaning ladder?

Cal/OSHA says not to use a step as a single ladder or partly closed. Louisville's Cross-Step is designed to convert to a leaning ladder.

Is a step or multi-position ladder better near wiring?

Werner's 6200, 7300 and T6200 steps have fiberglass rails, which meet OSHA's nonconductive rule. Check the rail material of any multi-position frame before using it near power.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder