Resources
Van Shelving by Trade for HVAC, Electrical, Service and Locksmith Vans, From Tank Racks to Locking Drawers and More
What HVAC techs, electricians, service crews and locksmiths carry, how drawers, bins, tank racks and locking storage answer it, and which Holman and Weather Guard layouts follow each trade.
Planning van shelving by trade starts with what rides in the van every day, because refrigerant tanks, breakers, door closers and key blanks each need a different kind of storage. Nation Wide Ladder supplies and installs trade layouts from Holman and Weather Guard, and we compare open shelves, drawer units, small-parts bins, tank racks, locking compartments and partitions against the work your van actually does.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
How Each Trade Shapes the Van Shelving Inside
A cargo van with no plan loses time at every stop, because parts slide, tools hide under stock and nobody can find the fitting they need. The answer is a layout built around what a crew carries. Bulky cases want open shelf space, small parts want bins and drawers, and costly meters or programmers want somewhere that locks. The balance between those three shifts from trade to trade, which is why makers sell van shelving by trade rather than one interior for everyone.
Holman says its trade packages were drawn up by its designers and product engineers using input from experienced tradesmen, and it lists layouts for HVAC, Electrical Contractor, General Service, Telecom, Plumbing, Security, Locksmith and General Contractor work. Weather Guard starts from a simpler baseline. Its guidance treats one bulkhead plus three shelving units, two on the driver side and one on the passenger side, as a balanced start for most trades, with drawers and holders added once the van is in service.
Either route works when the layout matches the job. The mistake is buying shelving first and deciding later what goes on it.
Tell our team what your crew carries in a normal week, and we will point you to the shelving layout that fits that load and your van.
Van Shelving for HVAC Techs and Electricians
Heating and cooling vans carry an awkward mix of refrigerant cylinders, gauges, recovery machines and boxes of fittings. The 46 inch Holman HVAC packages answer that with two large lockable compartments, seven heavy duty steel drawers, a small-parts bin module and a three tier refrigerant tank rack, all behind an 18 gauge steel bulkhead. Holman plans its HVAC layouts around long wheelbase vans, since a heating trade carries more volume than most.
Electrical work runs the other way, on small parts that are easy to lose. The Holman electrical contractor layouts put bins, drawer units and organizer inserts first, with enclosed space for meters and cordless kits. On the GM 135, Metris 126 and Transit 130 low roof versions, the center panel of the partition becomes a pass-through into the cargo area once the Holman 40620 door latch and handle kit is added. The NV200 version can take a wire reel holder that manages up to five spindles.
Both trades need weight kept low, with cylinders and wire on the floor positions and light stock up top.
We install the shelving, bulkhead, tank rack and reel holder in one visit, so each piece is bolted where the maker intended.
General Service, Locksmith and Telecom Trade Van Layouts
A maintenance or facilities crew never knows what tomorrow brings, so its van needs a little of everything. The Holman general service layout pairs generous open shelving with stackable, dividable plastic bins and locking door kits. Its EZ version swaps part of the shelving for the Long Drawer Pivot Pro, whose drawers pull out 52 inches from the rear doors before the unit pivots back to sit flush over the wheel well, locking in either position.
Locksmith vans put security first, since key machines and programmers make up much of what the business owns. On the ProMaster 118 and 136 inch version, the Holman locksmith package lists two and three drawer units with bins, two locking shelf drawers, dividers, J-hooks and a locking partition door reached from the driver’s compartment.
Telecom installers sit between the two, and Holman builds its Telecom layout to keep cabling parts and tools within easy reach of the door. Plumbing layouts follow the same idea for fittings and boxed parts, with pipe and long stock better carried on the roof.
You can open drawers and test partition doors on display at our Windham, NH and Worcester, MA showrooms during a free consultation.
Trade Van Shelving From More Than a Single Maker
Holman is not the only way to set up a trade van. Weather Guard van packages pair adjustable shelving with a bulkhead for each make, roof and wheelbase, and its separate Pro Packages are configured by trade. Weather Guard accessories such as the ITEMIZER drawer unit, refrigerant tank racks and wire spool holders let a basic kit grow toward an HVAC or electrical layout as the work settles. The wider Holman van shelving range also groups its layouts by roof height, from 43 inch compact units to 60 inch high roof builds.
If you would like to weigh other van and truck equipment makers before you decide, every one we carry sits in our truck, van and ladder brands hub.
Planning Van Shelving by Trade Around Growth and Payload
A shelving layout does not have to arrive finished. Holman Quick Package Go starts with a bulkhead partition and three shelving units and is designed so accessories can be added as the business grows, while Quick Package Max brings drawer units, parts bins, two locking shelf drawers and a locking partition door. Weather Guard folding shelves can be mixed with standard shelf units, so a delivery side line can share the van with service work.
Payload is the limit every van shelving plan meets eventually. Steel drawers, partitions and full bins add up, so load the heaviest stock low and toward the front, and ask how much payload the van keeps once the shelving is in. Fleets also gain from setting each van of a model up the same way, so any technician can find a part in any vehicle on the first try.
Before you order, decide what must lock, what must be reached from the door and what can live on an open shelf. Those three answers usually settle the shelving layout more quickly than a catalog does.
Send us a list of the vans, trades and add-ons you have in mind, and we will return one quote for the whole fleet.
Van Shelving by Trade Delivered Across New England
From tank racks for heating crews to locking drawers for locksmiths, we have spent over 50 years helping contractors carry their work, and Nation Wide Ladder delivers and installs van shelving by trade on our own trucks across New England.
Van Shelving by Trade FAQs
Which van shelving by trade suits HVAC work?
Holman's 46 inch HVAC packages pair two lockable compartments, seven steel drawers and a small-parts bin module with a three tier refrigerant tank rack and an 18 gauge steel bulkhead.
Which van shelving suits an electrician?
Holman's electrical contractor layouts lean on bins, drawer units and organizer inserts, with a pass-through partition option on some full-size vans and a five-spindle wire reel holder on the NV200.
Does a general service van need drawers or shelves?
Mostly open shelves with dividable bins and locking door kits. Holman's EZ version adds the Long Drawer Pivot Pro, with drawers that extend 52 inches from the rear doors.
How should a locksmith set up van shelving?
Put locking storage first. Holman's ProMaster 118 and 136 locksmith package lists two locking shelf drawers, drawer units with bins and a locking partition door reached from the cab.
Can I start with basic van shelving and add drawers and holders later?
Yes. Holman Quick Package Go and Weather Guard van packages are both meant to be built on with drawers, bins and trade holders once the van is working.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.








