Resources
Holman Pro II or System One Truck Racks Compared, Tube and Aluminum Frames, Mounting, Tool Boxes, Winches and More
How a heavy round-tube Holman frame and a modular aluminum System One rig differ in build, bed mounting, cab and cap options, tool box fitting, tie-downs and removal.
Choosing a Holman Pro II or System One rack for a full-size pickup is a choice between two sound designs built for daily loading, a heavy-duty round-tube frame and a modular aluminum rig. Nation Wide Ladder supplies and installs both, and we compare Pro II complete racks, cap racks and parts with System One Contractor and Utility Rigs, Pick-up Traks, Work Winches and tool box hangers for your cab, bed and loads.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
How the Holman Pro II and System One Racks Are Built
Holman builds the Pro II as its heavy-duty truck rack. Our listings give its tubing as 2 inch diameter high-tensile mechanical tube with a 0.083 inch wall, and Holman describes its truck racks as made from bigger, thicker round tubes with extensive gusseting at the legs and crossbars. Holman says its ladder racks follow SAE and ASTM manufacturing processes and come in steel and HD aluminum, with the Pro II tube aimed at trucks that load hard every working day.
System One, the rack brand of Christensen Mfg. Corp. in New Jersey, takes the aluminum route. Its founders were roofing and sheet metal contractors, and its racks now use 6000-series extruded aluminum with 18-8 stainless fasteners, many with nylon locking nuts. Legs and crossmembers share a 4-1/2 by 2-1/2 inch truss profile.
Both are serious contractor racks. The Holman Pro II leans on tube size and welded gussets for stiffness, while its aluminum rival leans on extrusions, bolted modules and a rust-free frame.
Our team walks you through both the Holman and the aluminum build with your truck and your loads in mind before you choose.
Holman Pro II and System One Fit on the Pickup Bed
The two racks meet the truck differently. System One starts with the Pick-up Trak, an aluminum base for the whole modular system that attaches to the inside lip of the bed rail and spreads the load along it, and the maker says no further holes go into the truck once the Traks are in. Its Contractor Rig unbolts in three to five minutes, leaving the Traks on the rails to restrain cargo and guard the paint.
The Holman Pro II is sold as complete racks named by cab, bed length and truck class, such as 04001 for standard cab long bed half-tons and 04004 for F-250 and F-350 trucks, or in parts, with side channels, legs and bars bought separately so a damaged section can be replaced. Holman full-length bed rails in 72, 78 and 96 inch lengths spread the rack load and protect the bed sides, though they are not offered for trucks with a camper shell.
Capped and bodied trucks favor the Holman Pro II family. Holman makes Pro II cap racks such as 04011, 6 inch taller legs, and racks for 8 foot service and platform bodies. The Holman Pro II racks for full-size pickups show the cab and bed splits.
Bring the truck to our Windham, NH or Worcester, MA showroom, and we will look at the bed, cap and rails during a free consultation.
System One and Holman Pro II for Long Loads, Boxes and Tie-Downs
Long, flexible material is where the System One Contractor Rig shows its design. Extension beams 5-1/2 inches tall carry the front crossmember out over the cab, in 102, 120, 138 and 156 inch lengths matched to each cab and bed, and a mid crossmember slides along them for step ladders and short stock. The maker rates the standard pickup Contractor Rig at 1,000 lb and 1,250 lb with Heavy I.T.S. (Integrated Tie-Down System) gussets, which also take Work Winches and tool box hangers. The lighter System One Utility Rig carries a 600 lb working load on free-standing trusses.
Tool boxes fit cleanly on that design. Top-side and low-side boxes hang from the gussets without legs on the bed floor, and on an 8 foot bed the gap between trusses measures 88 3/8 inches, enough for an 87 inch crossover box.
The Holman Pro II handles boxes through its bed rails, which give tool boxes a mounting point, and short heavy items through the 31110 extra crossbar, which can sit anywhere along the rack. Ask us for the Holman rating on your exact Pro II setup, since it varies by series, length and mounting.
We install truck boxes as well as racks, so the rig and the boxes under it go on in a single visit.
Holman Pro II, System One and the Wider Rack Range
Neither rack has to stand alone. The Holman truck rack range adds the Pro III for lighter work and the HD aluminum Pro IV, and System One truck racks scale from a bare set of Traks to a full contractor package.
You can compare every rack and truck box maker we carry in our truck rack and ladder brands hub.
Choosing a Holman Pro II or System One for Your Truck
Choose by how the truck works. A crew that wants a heavy tube frame, runs a cap or a service body, or likes buying legs, bars and side channels as separate parts will find the Holman Pro II family covers it. A crew that wants a rust-free aluminum rig that comes off in minutes, carries flexible stock over the cab, and hangs boxes and winches from the frame will find the aluminum rig suits it.
Winter matters in New England. Aluminum and stainless hardware remove the repainting that a coated tube frame may need over the years, while a heavy Holman tube rack rewards a rinse of road salt from its joints. Fleets also look at color, and we offer custom powder coating on new System One truck rack purchases.
Check a Holman or aluminum rack the same way. Tighten clamps and bolts after the first few hundred miles, inspect gussets or truss mounts each season, and tie loads at more than a single crossbar.
Send us your cab, bed length and the loads you carry, and we will price the Holman Pro II and System One options side by side.
Holman Pro II or System One, Fitted by Our Team
Over 50 years of serving contractors has shown us that both designs earn their keep, and Nation Wide Ladder installs a Holman Pro II or System One rack to suit your truck, delivered on our own trucks across New England.
Holman Pro II or System One FAQs
Is a Holman Pro II or System One rack stronger?
Both are contractor racks. The aluminum Contractor Rig is rated by its maker at 1,000 lb, or 1,250 lb with Heavy I.T.S. gussets. Holman ratings vary by series, length and mounting, so we confirm the figure for your Pro II setup.
What is the Holman Pro II made from?
Our Holman listings give it 2 inch diameter high-tensile mechanical tube with a 0.083 inch wall, with gusseting at the legs and crossbars.
Does the System One rack need holes drilled in the truck?
The maker says that once its Pick-up Traks are attached to the bed rail lip, no further holes need to go into the truck.
Which rack suits a pickup with a cap?
Holman makes Pro II cap racks for capped beds and 6 inch taller legs for taller caps. Tell us your cap height and we will confirm the fit.
Can tool boxes mount under a Holman Pro II or System One rack?
Yes. The aluminum rig hangs top-side and low-side boxes from Heavy I.T.S. gussets, and Holman bed rails give tool boxes a mounting point under the Pro II.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.








