Resources
Aluminum or Steel Truck Racks for Pickups, Weight, Rust, Strength, Repair, Finishes and Fleet Colors and More
How rack material changes weight on the truck, winter corrosion, repairs and paint, with the System One, TracRac, Holman, Weather Guard and Magnum racks that show each approach.
Deciding between aluminum or steel truck racks is a question of weight, winter roads and how hard your crew loads, since both materials carry ladders, pipe and lumber over a pickup every day. Nation Wide Ladder supplies and installs racks in both, and we compare aluminum System One rigs, TracRac racks and Holman HD aluminum models with steel racks from Weather Guard and Holman on weight, rust, repair, finish and fit.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Aluminum and Steel Truck Rack Weight on a Working Pickup
Weight is where aluminum makes its first case. Every pound of rack is a pound of payload the pickup cannot spend on tools, boxes and stock, and a rack rides high on the truck, where its weight is felt most. Thule lists its TracRac racks at 42 lb for the TracOne up to 58 lb for the full-size aluminum SR, and System One builds its frames from 6000-series extruded aluminum light enough to come off the truck in minutes. The System One Contractor Rig unbolts in three to five minutes, which makes a seasonal swap practical.
Light does not mean weak. Thule rates its aluminum TracRac Pro 2 at 1,000 lb and the SR at 1,250 lb when properly installed with weight spread evenly, and System One rates its pickup Contractor Rig at 1,000 lb, or 1,250 lb with Heavy I.T.S. gussets. Both makers add that the truck’s own limits and real driving conditions decide what a rack should carry on a given day.
Steel answers with stiffness in a heavier tube, which suits crews loading heavy material daily and willing to spend some payload on the frame.
Our team weighs your payload against each rack’s weight and rating before we quote either material.
Steel and Aluminum Truck Racks Through New England Winters
Road salt decides a lot of rack choices here. System One’s history makes the point. Its first racks were steel, and the company moved to aluminum because its first aluminum rack, formed from 3/16 inch 5052 aluminum sheet, ended the painting and rust problems the earlier racks brought. Its racks now pair aluminum frames with 18-8 stainless fasteners. Magnum, which hand builds its welded aluminum headache racks in Waterville, Maine, notes that aluminum will not rust the way steel can.
Steel holds up through winter too, as long as its finish does. Weather Guard coats its 1275-52-02 truck rack in matte black powder coat, and says that powder coat also serves as a sound undercoat if you later paint the rack to match a fleet color. Chips from careless loading are the weak point, so a steel rack rewards a quick touch-up after each hard season.
Either way, rinse salt off joints and fasteners in winter, since hardware and bracket contact points take the most wear.
We offer custom powder coating on new System One truck rack purchases, so a fleet color can be settled before the aluminum rack goes on.
Strength, Repair and Cost of Steel Truck Racks
Heavier racks keep a loyal following among crews who load roughly. A steel frame tends to dent rather than scuff when pipe or rebar drops onto it, and it is easy to repair or repaint. Holman’s own comparison on its van racks puts it plainly, describing steel as the lower-cost option that takes rough loading in stride, while HD aluminum keeps weight off the vehicle and avoids rust. Holman builds its ladder racks in steel and HD aluminum using SAE and ASTM manufacturing processes.
For pickups, the Holman Pro II uses 2 inch high-tensile mechanical tube with a 0.083 inch wall and heavy gusseting at the legs and crossbars, aimed at trucks that load hard every day, while the Holman Pro IV is an HD aluminum rack. The Weather Guard steel truck rack 1275-52-02 clamps into the stake pockets with no drilling and adds a welded airfoil, tie-down loops on each leg and rear handlebars.
If your truck spends its days on rough sites and you would rather repair a rack than baby it, steel deserves a hard look.
You can compare steel and aluminum frames in person at our Windham, NH or Worcester, MA showroom with a free consultation.
Aluminum Truck Racks and Steel Models Across Our Makers
Most racks we carry fall clearly on one side. System One truck racks are aluminum, and Thule names aluminum construction for its Thule TracRac Pro 2, SR and Utility Rack. The Holman truck rack range spans its heavy tube Pro II and the HD aluminum Pro IV, while Weather Guard pairs a steel ladder rack with aluminum headache racks.
For the full list of rack, box and ladder makers, take a look at our truck equipment and ladder brands hub.
Choosing Aluminum or Steel Truck Racks for Your Pickup
Start with how the truck works. A half-ton that carries ladders a few days a week, a mid-size pickup with a small payload, or any truck that spends winter on salted roads leans toward aluminum. A heavy-duty truck that hauls steel pipe or lumber every morning, with payload to spare and a crew that would rather repair than replace, may suit steel.
Then check how the rack mounts, because material is only half of fit. System One spreads its load along the bed rail on aluminum Pick-up Traks, TracRac uses vehicle-specific base rails or drill-free mounts, and the Weather Guard steel rack clamps into the stake pockets. A crossover tool box, a cap or a tall load in the bed can rule out one design whatever it is made of.
Fleets often settle on one material for every truck so parts, finishes and loading habits match.
Send us your truck details and the loads you carry, and we will quote steel and aluminum options side by side.
Aluminum or Steel Truck Racks, Installed for Your Work
With over 50 years of serving contractors, Nation Wide Ladder installs aluminum or steel truck racks matched to your pickup, your payload and your winters, delivered on our own trucks across New England.
Aluminum or Steel Truck Racks FAQs
Are aluminum or steel truck racks stronger?
Both carry real loads. Aluminum racks such as the TracRac SR and System One Heavy I.T.S. Contractor Rig are rated at 1,250 lb by their makers, while steel and heavy tube racks trade extra weight for stiffness and easy repair.
Do aluminum truck racks rust?
Aluminum does not rust the way steel does, which is why System One moved away from steel. Fasteners and contact points still deserve a check each winter.
Why choose a steel truck rack?
Steel costs less in Holman's own comparison, takes rough loading well, dents rather than scuffs and is easy to repair or repaint.
How much does an aluminum truck rack weigh?
Thule lists TracRac racks from 42 lb for the TracOne to 58 lb for the full-size SR, which is built in aluminum.
Can a truck rack be painted to match a fleet?
We offer custom powder coating on new System One truck rack purchases, and Weather Guard says the powder coat on its steel rack works as an undercoat for paint.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.







